Jump to content
SAU Community

Recommended Posts

1 hour ago, ActionDan said:

Well seems my car is about on par with what everyone else is seeing so fair enough. Will just have to run 98 for the longer cruises. 

I'll just have to put a big fuel cell in the boot for some extra capacity lol

I used 50L on Saturday on 98 (150kms)....

Used a lot of 3rd gear (5-6K rpm up and over the hill and back)...

1 minute ago, ActionDan said:

Really? that's way more than I expected? That would be about what I used? 

Yep - I filled it with Shell 98 on the way out  and less than 1/8th of a tank left.  Haven't refilled to verify- but given it takes a bit over 60L - 50L is what I would expect.

I was probably working harder in the rev range to keep up....

My 25det neo with ~380 kw to wheel

Driving from perth to albany, i got about 450 km to a tank, on the light, maybe could have squeezed another 10 or so ks out of it.

No narrowband or wideband hooked into ecu/tune.

I think thats pretty good haha.

Bigger turbo with generally softer response sub 3000rpm and less restrictive turbine can all contribute to fairly respectable fuel consumption in those conditions, for sure.  I agree with Jared, pretty good result when you think what it does when the taps are opened.

4 hours ago, jay-rod said:

My 25det neo with ~380 kw to wheel

Driving from perth to albany, i got about 450 km to a tank, on the light, maybe could have squeezed another 10 or so ks out of it.

No narrowband or wideband hooked into ecu/tune.

I think thats pretty good haha.

was suprised to see Albany had E85. was expecting you guys to bring 20 jerry can each but was suprisingly few there.Now just need it in Bunbury!!

15 minutes ago, ActionDan said:

Interesting. I've just been putting straight United Race Blend in it, though I notice the sensor never reads above 80% despite my testing showing 90+ with the basic water/shake in tube tester. 

Same, sensor tends to read around 79-80% (genuine gm continental). Only ever diluted it with 98 once, took ages to get back up to 79-80%

Yeah, if you run flex then it's really hard to get up to >80% if you aren't using straight ethanol - which means that it's also not too hard to keep it floating around 50-60% if you occasionally top up with a bit of petrol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...