Jump to content
SAU Community

Recommended Posts

Burning $1000 - Brakes or Diff?

As title states, I have roughly $1000 to spend on my r33 gtst.

It's currently my daily which I've tracked a few times. Has 300kw and dialed in suspension; brakes and diff are pretty much the only things still stock.

Option A - Nismo GT Pro 1.5 Way LSD.

Good for track and will stop the singling, but possibly shit for a daily driven car.

Option B - S15 Torsen Diff and half shafts.

Good street diff but requires use of weaker 6 bolt half shafts. 

Option C - 350z Brake upgrade.

350z front calipers/rotors and upgraded rear rotors and pads. But enough of an improvement over stock?

Any of the above options should cost around the 1k mark (s15 diff may cost less), give or take.

Which of the above would be the most worthwhile/best bang for buck?

Open to opinions/suggestions.

 

Edited by colourclassic
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469602-burning-1000-brakes-or-diff/
Share on other sites

I'd cast a strong vote for Option C, especially at 300kw. You'd want good pads and fluid too so 1k might be a stretch, but those are easy to add in later. Good DIY by Johnny here: http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

Re Option A, I had a Nismo 1.5-way put in last year, it's lovely on the track but I wouldn't daily it. It's 'livable' but not fun in suburban traffic. Plus, the Pro is about 1.5k new from Japan + installation so you're looking at more like 2k+ if new and you're not installing it yourself.

  • Like 1

It's got new brake fluid and QFM HPX pads at the moment. The brakes work okay I suppose but I'd like a bit more initial bite and less fade. 

The diff definitely needs to be done, but I'm weary of using a mechanical lsd on a street car. Wish there was a drop in torsen for R33's. 

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

  • Like 2
5 hours ago, hardsteppa said:

With a torsen, don't they only lock while both wheels are on the ground? So any inside wheel lift will mean no lsd? Fk that for a street car.

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

2 hours ago, colourclassic said:

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

if you're using adjustable coilovers, they tend to have a lot less droop than stock suspension, so the inside wheel can lift quite frequently with any sort of hard cornering, or uneven surface. That's why I love my mechanical, locked on throttle even with one wheel right off the ground.

Sure they are clunky, but after being able to stay right on the tail of a new model Porsche 911 on the mountain circuit, I wouldn't change it out, they really are amazing. My biggest gripe is more the wear to tyres. 

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Edited by colourclassic
On ‎14‎/‎03‎/‎2017 at 11:59 AM, admS15 said:

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

I did all the usual brake improvements to the standard R33 GTS25t set-up. Slotted RDA rotors, QFM A1RMs, braided lines, Cusco master cylinder stopper, RBF660, cooling ducts etc.  I then decided to pay the $ for a K-Sport BBK (356mm F&R  / 8 and 4 piston) The difference is night and day.  Bit more than $1k though.

Do the diff first. Save for a BBK.

I have a Nismo GT Pro 1.5 in mine. It's liveable. Might change my mind if it was my daily  - it's not.     

 

  • Like 1
On 14/03/2017 at 9:41 PM, colourclassic said:

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Please go and drive (or at least be a passenger) a 1.5-way before deciding, especially if it's a daily driven car. Do slow speed and sharp corners too, the usual suburban stuff.

People have very different views on what's 'streetable' and 'livable', I certainly wouldn't drive my car with the 1.5-way as a daily. Yes, soft, I know.

  • Like 1

Clunks and bangs etc. At car park manoeuvring speeds are par for the course with a GT Pro 1.5-way. Might be a bit tamer on the softest of the three settings and with certain diff' fluids   

Do the larger 6 and 8 piston BBK's work okay with the factory master cylinder and ABS? I guess with much larger front brakes the bias might be a bit more forward based?

Sounds like a mechanical diff isn't what I want for now. I might go about either shimming my VLSD or getting an S15 diff and giving that a shot. 

Should be able to squeak in under $1k for a 370z akebono brake upgrade.
Don't fade like the 350z brembos do.

I managed a set of calipers with pads, f&r RDA slotted rotors and bbk bracket for just under $1k, so it can be done.

Sent from my HTC_0P6B using SAU Community mobile app

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...