Jump to content
SAU Community

Recommended Posts

Upgraded Key

Image result for nissan upgraded key

Has anyone got one or seen one?

Or better yet does anyone know where to get one?

Allows you to remotely:

  • Lock and unlock Car

  • Turn Heating on / off

  • Start and stop the engine

  • Operate demister

Premium Smart Key

Nissan Skyline Crossover Upgraded Smart Key Premium

Has the same features as the upgraded smart key but with an LCD screen which also displays status information about the car such as locking, interior temperature and whether the engine is running. Note that these Smart keys are an unusual option to find and are rarely noted on auction sheets.

Got this info from Prestige MotorSport  http://prestigemotorsport.com.au/faqs/nissan-v36-skyline-model-guide/

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/
Share on other sites

Yes I was "Lucky" enough to have one of these with my car... Allows me to start the car and open the doors, but does not let me drive it, as it is not a proper smart key. It mainly seems to be for turning on the upgraded alarm..

Could not find any info on it, from Nissan or Infiniti, but did find out that Mitsubishi used the same system... I have attached the instructions for interest...

 

remote start manual 2011-10-20_234333_981f2d01.pdf

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7823557
Share on other sites

DEI Viper. Reasonably happy though the LCD remote has been quite flaky the last couple of years and I've had to disconnect the alarm from the power for a couple seconds but only twice, in order to get the remote start to work again.

Their firmware isn't what I would consider to be very reliable but if you have the fuse for the alarm in a strategic spot (or otherwise don't mind unplugging the battery for a couple seconds) then it's not a big deal to power it off/on again. Considering we're talking over a span of five years, I don't have much to complain about.

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7823813
Share on other sites

  • 2 years later...

NissanKey.PNG.a992225f9c31dddb2555dd8bfefca02a.PNGHi all

Got one of the fancy Fancy keys today.

(ps thank you nickcorr  for your Link to Documentation! was searching in japanese to find that lol!)

Gone through the documentation, it doesnt start remotely - apparently when they bring the cars into Australia, the box that controls that aspect of it is disabled.

However - the unlock function works, this must mean the box is still there and just needs re-wiring? - cause the feature to turn on from a distance is Beautiful for Australian summers, and my car is black!

any ideas/ Comments?

 

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7917575
Share on other sites

The BCM in our JDM vehicles is not to be mistaken as being the same as the USDM or even European market verhicles. They're not. Therefore, you won't find the remote start capability built into the BCM and it's not disabled by anyone when your car reaches the shores of Australia. I don't know where you heard that from but it is simply not true.

If you want remote start, you will need to go aftermarket like I did.

  • Sad 1
Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7917593
Share on other sites

  • 3 months later...

Just to update this:

Actually got mine to work!

theres a specific button press required to make it work. 


Button: The "F"

Push and hold for engine info and inside temp car.

Push 1nce + hold Start to turn car on (run for 10/20min)

Push and hold + Lock push and hold to lock remote

Push and hold + unlock push and hold turn unlock remote

 

Push unlock button + push again to unlock boot

Push and Hold unlock button to unlock hole car

 

Just now wondering, as, I cant seem to Run the car with this FOB. like the car turns on, so im like sweet, jump in and am about to go, put my foot on the brake and the car dies ? weird! one would think this device would count as a key!

Edited by Kossac
update
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7922990
Share on other sites

https://global.rakuten.com/en/store/suzukimotors/item/nsky033/

This is the only place i could find that sells them. 

on "Backorder"

i'm not keen to send money away for an item that's on backorder

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7923169
Share on other sites

On 1/17/2020 at 5:35 PM, Kossac said:

Just to update this:

Actually got mine to work!

theres a specific button press required to make it work. 


Button: The "F"

Push and hold for engine info and inside temp car.

Push 1nce + hold Start to turn car on (run for 10/20min)

Push and hold + Lock push and hold to lock remote

Push and hold + unlock push and hold turn unlock remote

 

Push unlock button + push again to unlock boot

Push and Hold unlock button to unlock hole car

 

Just now wondering, as, I cant seem to Run the car with this FOB. like the car turns on, so im like sweet, jump in and am about to go, put my foot on the brake and the car dies ? weird! one would think this device would count as a key!

did you go to someone to have them program it to your car or?

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7923189
Share on other sites

  • 7 months later...
  • 1 month later...
  • 6 months later...

I have the "Premium Upgraded Smart Key" as they like to call it.. the one in KOSSAC's post above.

For mine to start the engine, I have to press and HOLD the START button while the LCD display is still showing having first pressed the LOCK button. And keep holding for at least 15-20 seconds until it buzzes and clicks and the lights come on. Then the engine starts.

Only hassle is the engine stops as soon as you open the door, whether I unlock it from the remote or manually pressing the button on the door handle...

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7950303
Share on other sites

On the other hand, if you look at one of the Directed Electronics solutions and are prepared to go through the pain of wiring and programming it, you can have your remote start and it will only shut down the vehicle (and sound the alarm) if you don't have the OEM key with you when you hop in.

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7950534
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...