Jump to content
SAU Community

Recommended Posts

Upgraded Key

Image result for nissan upgraded key

Has anyone got one or seen one?

Or better yet does anyone know where to get one?

Allows you to remotely:

  • Lock and unlock Car

  • Turn Heating on / off

  • Start and stop the engine

  • Operate demister

Premium Smart Key

Nissan Skyline Crossover Upgraded Smart Key Premium

Has the same features as the upgraded smart key but with an LCD screen which also displays status information about the car such as locking, interior temperature and whether the engine is running. Note that these Smart keys are an unusual option to find and are rarely noted on auction sheets.

Got this info from Prestige MotorSport  http://prestigemotorsport.com.au/faqs/nissan-v36-skyline-model-guide/

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/
Share on other sites

Yes I was "Lucky" enough to have one of these with my car... Allows me to start the car and open the doors, but does not let me drive it, as it is not a proper smart key. It mainly seems to be for turning on the upgraded alarm..

Could not find any info on it, from Nissan or Infiniti, but did find out that Mitsubishi used the same system... I have attached the instructions for interest...

 

remote start manual 2011-10-20_234333_981f2d01.pdf

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7823557
Share on other sites

DEI Viper. Reasonably happy though the LCD remote has been quite flaky the last couple of years and I've had to disconnect the alarm from the power for a couple seconds but only twice, in order to get the remote start to work again.

Their firmware isn't what I would consider to be very reliable but if you have the fuse for the alarm in a strategic spot (or otherwise don't mind unplugging the battery for a couple seconds) then it's not a big deal to power it off/on again. Considering we're talking over a span of five years, I don't have much to complain about.

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7823813
Share on other sites

  • 2 years later...

NissanKey.PNG.a992225f9c31dddb2555dd8bfefca02a.PNGHi all

Got one of the fancy Fancy keys today.

(ps thank you nickcorr  for your Link to Documentation! was searching in japanese to find that lol!)

Gone through the documentation, it doesnt start remotely - apparently when they bring the cars into Australia, the box that controls that aspect of it is disabled.

However - the unlock function works, this must mean the box is still there and just needs re-wiring? - cause the feature to turn on from a distance is Beautiful for Australian summers, and my car is black!

any ideas/ Comments?

 

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7917575
Share on other sites

The BCM in our JDM vehicles is not to be mistaken as being the same as the USDM or even European market verhicles. They're not. Therefore, you won't find the remote start capability built into the BCM and it's not disabled by anyone when your car reaches the shores of Australia. I don't know where you heard that from but it is simply not true.

If you want remote start, you will need to go aftermarket like I did.

  • Sad 1
Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7917593
Share on other sites

  • 3 months later...

Just to update this:

Actually got mine to work!

theres a specific button press required to make it work. 


Button: The "F"

Push and hold for engine info and inside temp car.

Push 1nce + hold Start to turn car on (run for 10/20min)

Push and hold + Lock push and hold to lock remote

Push and hold + unlock push and hold turn unlock remote

 

Push unlock button + push again to unlock boot

Push and Hold unlock button to unlock hole car

 

Just now wondering, as, I cant seem to Run the car with this FOB. like the car turns on, so im like sweet, jump in and am about to go, put my foot on the brake and the car dies ? weird! one would think this device would count as a key!

Edited by Kossac
update
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7922990
Share on other sites

https://global.rakuten.com/en/store/suzukimotors/item/nsky033/

This is the only place i could find that sells them. 

on "Backorder"

i'm not keen to send money away for an item that's on backorder

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7923169
Share on other sites

On 1/17/2020 at 5:35 PM, Kossac said:

Just to update this:

Actually got mine to work!

theres a specific button press required to make it work. 


Button: The "F"

Push and hold for engine info and inside temp car.

Push 1nce + hold Start to turn car on (run for 10/20min)

Push and hold + Lock push and hold to lock remote

Push and hold + unlock push and hold turn unlock remote

 

Push unlock button + push again to unlock boot

Push and Hold unlock button to unlock hole car

 

Just now wondering, as, I cant seem to Run the car with this FOB. like the car turns on, so im like sweet, jump in and am about to go, put my foot on the brake and the car dies ? weird! one would think this device would count as a key!

did you go to someone to have them program it to your car or?

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7923189
Share on other sites

  • 7 months later...
  • 1 month later...
  • 6 months later...

I have the "Premium Upgraded Smart Key" as they like to call it.. the one in KOSSAC's post above.

For mine to start the engine, I have to press and HOLD the START button while the LCD display is still showing having first pressed the LOCK button. And keep holding for at least 15-20 seconds until it buzzes and clicks and the lights come on. Then the engine starts.

Only hassle is the engine stops as soon as you open the door, whether I unlock it from the remote or manually pressing the button on the door handle...

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7950303
Share on other sites

On the other hand, if you look at one of the Directed Electronics solutions and are prepared to go through the pain of wiring and programming it, you can have your remote start and it will only shut down the vehicle (and sound the alarm) if you don't have the OEM key with you when you hop in.

Link to comment
https://www.sau.com.au/forums/topic/469992-upgraded-key/#findComment-7950534
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...