Jump to content
SAU Community

Recommended Posts

Tuners in Melbourne

Hey guys

I'm looking to get my GTT nistuned, and I've more or less settled on going to Chasers Motorworks in West Melbourne.

They've been a great help and very informative with all my questions via emails. Just looking get a second opinion before I make my final decision, so if anyone has brought their car there please let me know your personal experiences!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/470741-tuners-in-melbourne/
Share on other sites

3 hours ago, iruvyouskyrine said:

Chequred tuning is a forum favourite. Trent and Cat are 2 of the nicest people I know and bent over backwards to help me out. If I ever move back to melbourne this is where I would be going 100%

I've heard nothing but good things about Chequered Tuning. But they are an hour each way from where I live...

 

3 hours ago, chilzzi said:

can vouch for Chasers - excellent!

May I ask what work you had done at Chasers? Just tuning?

I was actually living in Wagga at the time haha. Towed my car 6 hours each way for Trent to tune it. And when there was an issue on the dyno (not there fault, it was the way I assembled the dump pipe [had installed a bolt that was too long and prevented the wastegate flapper from opening past halfway]) they offered to get it fixed and retune it for free.

ALL tuners have good and bad reviews, friends who love them and ex-customers not happy

There will be names tossed around the forum, those are usually good leads. Ultimately I would go with the one that gives you the most confidence in their communications to you and is confident in a good outcome for your vehicle. Be clear about your requirements, what you expect etc. so you have a degree of accountability; also keep in mind that the tune in many ways will be limited to your vehicle setup.

  • Like 3
19 hours ago, iruvyouskyrine said:

I was actually living in Wagga at the time haha. Towed my car 6 hours each way for Trent to tune it. And when there was an issue on the dyno (not there fault, it was the way I assembled the dump pipe [had installed a bolt that was too long and prevented the wastegate flapper from opening past halfway]) they offered to get it fixed and retune it for free.

Oh wow! Speaks volumes about your confidence in them! Makes my 1hr each-way drive to them seem like a trip to the supermarket

 

16 hours ago, Birds said:

ALL tuners have good and bad reviews, friends who love them and ex-customers not happy

There will be names tossed around the forum, those are usually good leads. Ultimately I would go with the one that gives you the most confidence in their communications to you and is confident in a good outcome for your vehicle. Be clear about your requirements, what you expect etc. so you have a degree of accountability; also keep in mind that the tune in many ways will be limited to your vehicle setup.

That's true, thanks for the tip!

I agree with what birds said. Definitely ring and have a chat and see if you feel comfortable with them, but I'm sure you won't be disappointed by chequered :)

Be sure to let us know how you get on and where you go!

  • Like 1
17 hours ago, iruvyouskyrine said:

I agree with what birds said. Definitely ring and have a chat and see if you feel comfortable with them, but I'm sure you won't be disappointed by chequered

Be sure to let us know how you get on and where you go!

Will do! I'm so excited to get my car tuned! :P

Personally I've been to chasers for a tune and i wasn't too happy with the outcome. At the time i had a hypergear g3 r34 highflow turbo on my r33 gtst, blitz return flow cooler, full exhaust and all supporting mods.

I was happy with the power of 250rwkw at 16psi, what i wasn't happy with was the fact the car was making full boost at 5000rpm.
When i saw the dyno sheet i had a chat to paul the tuner about why it was so laggy and he basically just told me it's the turbo and he can't do anything about it.

Even though i had a return flow cooler, exhaust was a bit restrictive (wasn't too bad though) and the bigger turbo i don't think i should have been reaching full boost no where near that late. I wasn't happy to not get any suggestions or solutions other than to get another turbo.

Not trying to bag chasers out or anything just sharing my experience, heaps of other people have been very happy with their service. Other than that the car felt way smoother to drive, idled perfectly, cold start was perfect aswell.

Imo if you have a hypergear turbo go to chequered since they deal with hypergear all the time.

1 hour ago, vxsr33 said:

Personally I've been to chasers for a tune and i wasn't too happy with the outcome. At the time i had a hypergear g3 r34 highflow turbo on my r33 gtst, blitz return flow cooler, full exhaust and all supporting mods.

I was happy with the power of 250rwkw at 16psi, what i wasn't happy with was the fact the car was making full boost at 5000rpm.
When i saw the dyno sheet i had a chat to paul the tuner about why it was so laggy and he basically just told me it's the turbo and he can't do anything about it.

Even though i had a return flow cooler, exhaust was a bit restrictive (wasn't too bad though) and the bigger turbo i don't think i should have been reaching full boost no where near that late. I wasn't happy to not get any suggestions or solutions other than to get another turbo.

Not trying to bag chasers out or anything just sharing my experience, heaps of other people have been very happy with their service. Other than that the car felt way smoother to drive, idled perfectly, cold start was perfect aswell.

Imo if you have a hypergear turbo go to chequered since they deal with hypergear all the time.

Thanks for sharing your experience vxsr33. What happened after that? Did you go to another tuner?

I guess people's experiences will always be mixed since every car/build is different.

PS i'm still running the stock turbo. 

Edited by AC34GTT

Nahh i left it as is and drove the car for around 6 months until recently as i swapped the highflow for a HKS gtrs (better response).

Car needs a retune now and I'm planning to take it to chequered.

Imo just go with chequered, you literally can't go wrong with them i haven't heard of a single person that hasn't been satisfied with their service. Just make sure your car is up to scratch for the dyno like do a good service on it, clean coils and change plugs etc because they only tune. I don't think they will fix any mechanical issues you may encounter on the dyno.

Either way I'm sure you will get a great tune from whichever tuner you pick

12 hours ago, vxsr33 said:

Personally I've been to chasers for a tune and i wasn't too happy with the outcome. At the time i had a hypergear g3 r34 highflow turbo on my r33 gtst, blitz return flow cooler, full exhaust and all supporting mods.

I was happy with the power of 250rwkw at 16psi, what i wasn't happy with was the fact the car was making full boost at 5000rpm.
When i saw the dyno sheet i had a chat to paul the tuner about why it was so laggy and he basically just told me it's the turbo and he can't do anything about it.

Even though i had a return flow cooler, exhaust was a bit restrictive (wasn't too bad though) and the bigger turbo i don't think i should have been reaching full boost no where near that late. I wasn't happy to not get any suggestions or solutions other than to get another turbo.

Not trying to bag chasers out or anything just sharing my experience, heaps of other people have been very happy with their service. Other than that the car felt way smoother to drive, idled perfectly, cold start was perfect aswell.

Imo if you have a hypergear turbo go to chequered since they deal with hypergear all the time.

The G3 from memory is a laggy turbo (iirc people usually make full boost from 4300-4500 onwards). But they also make 300kw+ with it, so your power level was definitely down. Did they check engine comp etc.? I have a Blitz return flow and 3 inch turbo back and with my HG highflow I made 252rwkw at 15psi, full boost at ~3500rpm. So I would say there was something vastly wrong with the engine, turbo or setup. A bad tune can make things laggier for sure but it shouldn't be /that/ bad out of anyone who has half a clue what they are doing - untuned the turbo should be more responsive than that!

It's a shame in a way you're not following up the turbo change with a tune at the same place as it will be difficult to compare a different tuner and hub dyno setup when it could have been the turbo that had issues. I understand dissatisfaction with service or attitude towards fixing issues though.

Was expecting boost full boost to come on around 4200 especially since i got the ball bearing CHRA for $400 extra. Engine comp isn't the best but the motor seems to run well and idle smoothly.

I spoke to Tao about it, he said something like check the preload on the wastegate because it could be opening up too early and he said to check if VCT is working.

All i can say is the response with the HKS is amazing, feels like the stock turbo or even better. Although i haven't boosted it over 5psi since i need a tune.

tmpPhoto.jpg

Will be interesting to see the HKS dyno figure as that could at least isolate the lack of power to the tuner or old turbo. Those are supposed to make about 280rwkw on 98 I think?

  • Like 1
18 hours ago, vxsr33 said:

Nahh i left it as is and drove the car for around 6 months until recently as i swapped the highflow for a HKS gtrs (better response).

Car needs a retune now and I'm planning to take it to chequered.

Imo just go with chequered, you literally can't go wrong with them i haven't heard of a single person that hasn't been satisfied with their service. Just make sure your car is up to scratch for the dyno like do a good service on it, clean coils and change plugs etc because they only tune. I don't think they will fix any mechanical issues you may encounter on the dyno.

Either way I'm sure you will get a great tune from whichever tuner you pick
 

Oh cool, be sure to let us know how your car goes on the dyno when you bring it to Chequered!

Thanks for the reminder about getting it serviced first haha.

  • Like 1
Will be interesting to see the HKS dyno figure as that could at least isolate the lack of power to the tuner or old turbo. Those are supposed to make about 280rwkw on 98 I think?

I've heard the HKS gtrs is good for around 250rwkw. I'm only hoping for a responsive 240 so it should meet my requirements.

I went to chequered because my car had been tuned there by the previous owner. Had a great experience, Trent and Cat both so friendly and helpful. I had wastegate spring issues and Trent changed it over with springs he had in stock, no problem. He also found a loose earth wire that was causing havoc high in the rev range. I would (and will) go back in a heartbeat. I travelled from Bendigo to him (2.5hrs each way)

11 hours ago, NickRB20 said:

I went to chequered because my car had been tuned there by the previous owner. Had a great experience, Trent and Cat both so friendly and helpful. I had wastegate spring issues and Trent changed it over with springs he had in stock, no problem. He also found a loose earth wire that was causing havoc high in the rev range. I would (and will) go back in a heartbeat. I travelled from Bendigo to him (2.5hrs each way)

Ok now you guys are making me want to go to Chequered too... and seems like my 1hr each way is nothing compared to how far you guys travel lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...