Jump to content
SAU Community

Recommended Posts

No air coming through induction 96 stagea

Hey guys I don't know if my account is the same as the one I introduced myself on cause I think it logged in through Facebook... anyway wondering if anyone can help shed some light. 

I don't know much about cars and by much I mean f all really. 

But my Stagea (96 RS) isn't sucking air through the intake. Upon having a look I see the sensor thing in/on there. It looked fine, I checked the connection and it was clean. 

I don't even want to drive it to the mechanics cause when i was driving it and it started to happen it didn't feel good and no air is not good. 

I searched on here and saw about air mass sensor? Is this it? Broken? 

 

Thanks and here is a pic of her 

 

IMG_1669.JPG

Trace the piping from the throttle body/intake manifold all the way along the intercooler piping and see if a hose has come loose or split. It would be making noise somewhere along that sucking in air from before the air filter.

Without air it won't run. At idle it won't suck much air - have you tried winding the throttle up? If its not coming in the front intake its coming in somewhere else so just check all the way back to the turbo intake.

hey guys sorry I haven't replied it turned out to be the turbo. So now I need a new one. Anyone got or know whom may have one? Also if going to buy a new turbo... which ones would you guys recommend? I don't have a lot of cash ATM. Seen some on eBay etc but a bit unsure 

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...