Jump to content
SAU Community

Recommended Posts

Fair enough, went OK for me with better rotors and pads for 6-7 laps at a time on my boat. 

Wasn't setting lap records though. 

Bigger is better, but if you're throwing yours out, give them to me for the Silvia ;)

On 25/10/2017 at 9:18 AM, ActionDan said:

Fair enough, went OK for me with better rotors and pads for 6-7 laps at a time on my boat. 

Wasn't setting lap records though. 

Bigger is better, but if you're throwing yours out, give them to me for the Silvia ;)

Yea you can make them work however you end up going extreme pad which destroys rotors

also when pushing a heavy gtr 10/10ths they die in the arse really quick

380mm will work well and have ample cooling ( and rotors r cheap as there are many option for gtr, if you want ant to get serious 2mm spacer and step up to 400mm rotor from a later model, however good luck getting them under a 18 rim)

 

12 minutes ago, ActionDan said:

just be baller and run 19s like I do. 

You'd alreayd have 19s if you were about dat stance lyfe. 

Nah, you downsize, just like tyre widths.

Throw out those big brakes, replace with tiny slider calipers and 15" wheels

SM-S15-083.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...