Jump to content
SAU Community

Recommended Posts

I thought he just stripped them to sell for kebabs and kept the spicey shit for himself to build ironic LeMons cars?

 

Have you used the oil cap breather before fatz?

Looked like a good stop gap measure.

14 minutes ago, Darmanin10 said:

Going off topic here but you obviously track your gtr's unlike most owners.

What brakes are going on this thing? 

Simple setup

r35 front with dba rotors and winmax pads 380mm

rear are 6 piston brembo on a Hemi 300c 350mm dba rotor Winmax pads 

and having played brakes on a lot of gtr I went with a PE engineering full pedal box with adjustability

 

14 minutes ago, ActionDan said:

I thought he just stripped them to sell for kebabs and kept the spicey shit for himself to build ironic LeMons cars?

 

Have you used the oil cap breather before fatz?

Looked like a good stop gap measure.

Yea had it on my last r33 did 6 years of track days (10-20 a year)

keep the oil cap connection open and put a one way valve on your catch can drain back

but I also run a external catch can scavenge pump (weldon external dry sump pump) which sucks the can dry over 6k rpm( this is just for extra f**k you oil control) 

 

  • Like 1
11 hours ago, fatz said:

Yea had it on my last r33 did 6 years of track days (10-20 a year)

keep the oil cap connection open and put a one way valve on your catch can drain back

but I also run a external catch can scavenge pump (weldon external dry sump pump) which sucks the can dry over 6k rpm( this is just for extra f**k you oil control) 

 

I've been looking at dry sump for my new motor  but with what I've learned froim tracking my old one and just general research I reckon I can setup a decent enough wet sump for little $$ My current setup is a mess of hoses but worked ,all rocker vents and sump into baffled, vented can with a sump drain. New motor shouldn't breath as heavy, will have bigger sump with some breather ports welded on etc. 

Got pics of this external scavenge setup? Belt driven or elec.

17 hours ago, fatz said:

Yea had it on my last r33 did 6 years of track days (10-20 a year)

keep the oil cap connection open and put a one way valve on your catch can drain back

but I also run a external catch can scavenge pump (weldon external dry sump pump) which sucks the can dry over 6k rpm( this is just for extra f**k you oil control) 

 

So much RB wisdom in one post.

Edited by JGTC
On 5/21/2020 at 6:41 PM, fatz said:

Gtrs are for discussing whos oem parts are the cleanest now 

Hey I take offence at that! Oh no wait... totally me... (only cause i can normally win!)  ?

Seeing a bit of back and forth/pissing contest between 2 of my local car club guys, 280rwkw silvia and over 500awkw GT-R, both running the same times at winton (silvia now fractionally faster, both in the 1m27s bracket) both on the same slicks.

GT-R guy reckons he needs bulk coin to go any faster, Silvia guy just lunched his LS and is going to actually build one for something more than 280rwkw and reckons there's more lap time to be had easily.

I love GT-Rs, but are they really a good track platform? Heart says yes, brain says no :(

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...