Jump to content
SAU Community

New project- R32 GTR with VK56DE ?

Mr RS
 Share

Recommended Posts

Mr RS Newbie

Mr RS

Posted
Posted

Hey

 I’m new here so I apologise if this is the wrong section upfront.

i am considering new project cars and was thinking about building a V8 R32 GTR and wanted to ask if anyone has done it while retaining ATESSA and what engines?

If I do it I’d want to retain an Nissan engine and I can’t go past the potential of the VK56 based on performance and available parts etc from the US and as I know that the VH45 will fit I was wondering if anyone had or knows of anyone doing or mocking up a 56DE in a 32 GTR? 

The aim of the car would be to a fast a street car as possible which I will use in drag, roll and top speed racing events.

I am aware of the custom fab work needed and am mainly trying to work out first if the engine will fit along with a nice twin turbo setup along the lines of twin 6466 or 6870s.

Thanks in advance!!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/473747-new-project-r32-gtr-with-vk56de/
Share on other sites
WantGTR Mentor

WantGTR

Posted
Posted
4 hours ago, Mr RS said:

Hey

 I’m new here so I apologise if this is the wrong section upfront.

i am considering new project cars and was thinking about building a V8 R32 GTR and wanted to ask if anyone has done it while retaining ATESSA and what engines?

If I do it I’d want to retain an Nissan engine and I can’t go past the potential of the VK56 based on performance and available parts etc from the US and as I know that the VH45 will fit I was wondering if anyone had or knows of anyone doing or mocking up a 56DE in a 32 GTR? 

The aim of the car would be to a fast a street car as possible which I will use in drag, roll and top speed racing events.

I am aware of the custom fab work needed and am mainly trying to work out first if the engine will fit along with a nice twin turbo setup along the lines of twin 6466 or 6870s.

Thanks in advance!!

i know you are going to say to be different but why? the fastest street, radial gtrs run tired old rb30 blocks. quickest so far is a 7.4.

what level do you think a vk56 needs to be at to be at that level.

GTSBoy Grand Master

GTSBoy

Posted
Posted

Look up Project Unicorn on Mighty Car Mods (or it might have been running on their mcmtv2 channel).  They did VK41 + turbo into Stagea.  So same same basically.  Shows you what you will need to do.

Beyond that. I echo the sentiments above.  The VK56 is not an inherently super dooper strong engine.  The RBs were fairly over-engineered, but the VKs are much later designs where a lot of overdone speccing was cut out.  Then there is 30 years of dev work in even more over-engineered upgrades for RBs that is missing from VKs.  Sure, the bulk torque from a larger engine would be nice to have, but you can have as much power as you need to make it impossible to drive with a 3L anyway.

  • 10 months later...
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
On 3/4/2019 at 8:05 PM, T04GTR said:

all well and good, but where do you get a vk56de from... i am looking..

The US I am afraid (they are built there not in Japan):

http://www.buyusedengine.com/used_engine.php?make=Nissan&model=Titan&fits=(5.6L, VIN A, 4th digit, VK56DE)

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...