Jump to content
SAU Community

Nolathane or Superpro

Adz2332
 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted

Im looking to put all new rubbers in the front end of the 32 as it is getting a new engine so thought i would while its all out.

ive looked around and have two options that ive found, nolathane or superpro

Whos has used each?

Recommendations?

Price etc?

 

Link to comment
https://www.sau.com.au/forums/topic/473971-nolathane-or-superpro/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

Well, yeah.  Superpro is pretty much the default choice.

Look up my recentish posts on the topic of the GKTech FUCAs.  Worth a look at, even if they aren't road legal.  Urethane bushes in the stock Nissan 32 FUCAs arre not great.  Same same with using rose joints on the caster rods, rather than urethane bushes in the stockers.  I posted years and years ago about how much better they were.  If you were to do those things, then the only remaining bushes in the front end are the lower control arms and the ARBs.

zoomzoom Mentor

zoomzoom

Posted
Posted

I've been running just about every superpro bush since 2012. Control arms, castor, steering rack etc. While they're fine and have been silent, if you can simply put in a new adjustable item with new bushes, do that. Don't bother replacing the bushes.

hardsteppa Grand Master

hardsteppa

Posted
Posted
2 hours ago, Adz2332 said:

whiteline do just the replacement bushes also?

i'm pretty certain whiteline and nolathane are same company (Redranger Pty Ltd). I have some whiteline, some nolathane, some superpro across the car...can't say I see a difference, just the different design you may prefer between manufacturers, eg, diff bushes. Urethane bushes have been around that long I'd be surprised if either company had some miracle advantageous compound over that of their competitor...but still charge a similar price for their product. I'd use whichever you can get cheapest.

Although as above, might be better to just spend a little more and get whole new adjustable arms, and some bushes are better rosejointed.

Duncan Grand Master

Duncan

Posted
Posted

hmmmm....I saw a pair of gtech upper arms snapped at the welds just last week. the car looked hard to drive after that. I suspect there is no good option for 32 upper arms, maybe the nismo brackets are the best idea.

I did run nolathene bushes back in the day, pretty sure they went broke and got bought our like Andy said. They worked fine but degraded quickly over time, they only lasted 1-2 seasons before needing re-doing which was a PITA to do again.

djr81 Grand Master

djr81

Posted
Posted

Hmm. I flogged out the trailing upper front bush in one track day. It was a white line. Thing that fixes it is moving the pick up point for that link.

Do the super pro bushes have pigtails for grease retention. The photos don't appear to show them. Or are they all the same? The nolathane bushes are dimensionally the same as the Whiteline bushes.

GTSBoy Grand Master

GTSBoy

Posted
Posted
4 hours ago, Duncan said:

hmmmm....I saw a pair of gtech upper arms snapped at the welds just last week. the car looked hard to drive after that. I suspect there is no good option for 32 upper arms, maybe the nismo brackets are the best idea.

I did run nolathene bushes back in the day, pretty sure they went broke and got bought our like Andy said. They worked fine but degraded quickly over time, they only lasted 1-2 seasons before needing re-doing which was a PITA to do again.

That's not really what I wanted to hear about the GK-Tech uppers.  I'm going to have to cross my fingers and hope, because I'm not going back to stock arms.

 

The recommendation for stock arms is all well and good, but if you need to correct camber you're up shit creek with the stockers.  That's the reason that I put (originally) Whiteline and then at least 2 sets of Superpro in the front of my car over the years.  Even with grease nipples added (I added them myself in ~2002) the bushes take a beating.

I might have to modify my spare brackets to Nismo spec and try with new urethanes in my adjustable stockers if I break a GK-Tech arm. 

Duncan Grand Master

Duncan

Posted
Posted

well the good news is my upper arm bushes have been lasting twice as long (you know 3-4 weekends instead of 1-2) since I move the LCA mouting points outwards 20mm. Its definitely a 30 year old geometry issue.

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
9 hours ago, Meathead said:

If your OEM ones are flogged out just replace them with OEM or Nismo.

Wouldn't waste my time with short duration cheap plastic stuff unless you like pulling it down a lot.

 

 

Who sells OEM?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...