Jump to content
SAU Community

Recommended Posts

Hi guys, i'm new in the carworld and finally got myself my dream car. the R33

I bought a 1997 40anniversary R33 GT-S 3weeks ago. I gave it a service(change oil, oilfilter and sparkplugs) and the car runs great.
I don't drive much.

20minutes to work, and 20miuntes back home. There are times when the car is on for more than 30minutes(Incase i have to drive my gf somewhere before home) that my car sound turns into this gruggling noise but my meters seems like nothing is going on.

One thing that comes to mind that i am not using a coolant. Just using water atm in the radiator and i think that the water becomes so hot that it maybe causing the gruggling noise to happen.

I can get home, turn off the car and start it back up tomorrow and the sound is back to normal like nothing happend. just that if the car is on more than 30minutes i hear the gruggling noise(doesn't sound like a bubble noise, just a harley davidson idle ish overheat noise idk how to explain)

My car is currently at 394WHP if i'm on stage B(22psi) but its currently on stage A(16psi).
I tried hitting up 3 local mechanics but they told me it could be my thermostat or a blown headgasket but they seem too busy to give a hand. So i thought to ask on forums.

I thought maybe flushing the radiator untill the water end up coming out clean, and get an antifreeze coolant should do the trick but idk if the issue might continue.

Any help would be nice

EDIT: If this is the wrong section, can someone move it to the right section? It's hard browsing on my phone

Edited by Pastechi
Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/
Share on other sites

Welcome to :sau: !

  On 15/08/2018 at 2:24 PM, Pastechi said:

 One thing that comes to mind that i am not using a coolant. Just using water atm in the radiator and i think that the water becomes so hot that it maybe causing the gruggling noise to happen.

Expand  

Why no coolant? Whats your temp like when you hear this noise?

Do you notice any change to the performance?

Does it change in sound in sync with revs?

Can you leave it running after a drive to get it to 30 mins? Then stick your head under the bonnet?

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883312
Share on other sites

  On 16/08/2018 at 12:12 AM, GTSBoy said:

And are we to take "gruggling" to mean "gurgling"?  Like a water movement/boiling noise?

Expand  

No. Its a very important distinction.

Much like a Gruffalo noise.

child gruffalo GIF

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883315
Share on other sites

  On 16/08/2018 at 12:12 AM, PranK said:

Welcome to :sau: !

Why no coolant? Whats your temp like when you hear this noise?

Do you notice any change to the performance?

Does it change in sound in sync with revs?

Can you leave it running after a drive to get it to 30 mins? Then stick your head under the bonnet?

Expand  

Well i was planning on flushing the radiator and use a coolant end august but i thought it wouldnt be a problem, because i don't drive much

I do notice a change in performance, as soon as i heard the sound turn into this harley davidson shit, my acceleration feels slower. 
Even if i don't rev the sound already changed. I need to put the car to work for more than 30minutes next time so i can record it. I think thats the best thing i can do to show the issue
 

Last time when it happend i turned the car off and immediately put my head under the car to see if i can hear any noise but nothing. Just quiet. After 5minutes of the car being off, i started it back up and the car sound went back to normal

 

p.s. this happend monday after work when i drove my gf home.
Ever since then i drove below 30minutes till this day and my car sound never changed.

Idk if i have a faulty coil, or maybe using water can cause it. Or maybe the thermostat is wonky.

Edited by Pastechi
Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883351
Share on other sites

  On 16/08/2018 at 12:15 AM, PranK said:

No. Its a very important distinction.

Much like a Gruffalo noise.

child gruffalo GIF

Expand  

well...can i call it a harley davidson noise? because thats what my car sounds like after 30minutes

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883352
Share on other sites

  On 15/08/2018 at 11:42 PM, niZmO_Man said:

Umm, you'll have to be more specific about the location of the noise. Is it missing or running rough? Or some weird noise from the dash?

Expand  

well i never found out where the noise is actually coming from because it only happend twice(and i only drove more than 30minutes twice so far) and i immediately turn of the car, i am a bit scared i may f*ck something up lol. What i did do after i turned off the car was stick my head under it to see if i can hear any sound from the radiator or motor, but nothing till where i know.
I'll see tomorrow(friday) when i leave work i can drive extra so i can get that harley davidson sound to appear again, then maybe i can record around the car and get the audio

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883353
Share on other sites

  On 16/08/2018 at 1:45 PM, Pastechi said:

well...can i call it a harley davidson noise? because thats what my car sounds like after 30minutes

Expand  

Harley noise, as in, it is misfiring?  When does it make the noise?  All the time it is running (once it starts)?  Only on boost?  Only at certain revs?

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883364
Share on other sites

  On 17/08/2018 at 12:26 AM, GTSBoy said:

Harley noise, as in, it is misfiring?  When does it make the noise?  All the time it is running (once it starts)?  Only on boost?  Only at certain revs?

Expand  

after 30minutes of driving the car, then the sound just changes on me. when i turn off the car and look around i hear nothing and i don't smell anything either :s
I did feel my acceleration be a little bit laggy tho

Edited by Pastechi
Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883366
Share on other sites

Get video.  It's not going to be possible to do this without seeing/hearing it, and the Carib is too far away!

Also, time a run to 100km/h before it goes bad and then another one after, so we can see what difference it might be making there.

Even with all that, I'm not making any promises.  This shit usually turns out to be something totally unexpected and strange, like a plastic sack wrapped around the tailshaft or a coke can jammed in the exhaust - that sort of weird shit.

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883367
Share on other sites

Flush the cooling system thoroughly, put in fresh coolant and bleed the whole system.
The noise could just be the water boiling after the engine has had time to get up to temperature.

You should definitely be running coolant anyway to protect against corrosion and increase the boiling temp.

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883372
Share on other sites

Simple question. Is the radiator full and the overflow bottle at the right level? As long as their is fluid in there you should get an idea of what temp it is running at.

If the temp seems normal (half or below), and there is no noticable leaks etc. then fair chance its not the cooling system. The stock gauge is not terribly accurate but i think you would see if there was a problem causing an overheat

It sounds like possibly a coil on the way out that only shows up when the coil gets really hot after a bit of driving, but as per above really need a video to show the noise

Last time I had a dead coil, could definetly tell that it was lacking power and sounded like a WRX

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883424
Share on other sites

  On 18/08/2018 at 1:19 AM, 89CAL said:

Simple question. Is the radiator full and the overflow bottle at the right level? As long as their is fluid in there you should get an idea of what temp it is running at.

If the temp seems normal (half or below), and there is no noticable leaks etc. then fair chance its not the cooling system. The stock gauge is not terribly accurate but i think you would see if there was a problem causing an overheat

It sounds like possibly a coil on the way out that only shows up when the coil gets really hot after a bit of driving, but as per above really need a video to show the noise

Last time I had a dead coil, could definetly tell that it was lacking power and sounded like a WRX

Expand  

I drove the car for over 30minutes yersterday...try to get the sound to show up. Even burned some rubbers but nothing.
But yes....after 30minutes it sounds like a wrx and it lacks a bit of power....
I'll be checking the coils wednesday with a mechanic to see what we can find

I should also remove the cap where the coils are too..maybe its preventing heat from coming out

Edited by Pastechi
Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883453
Share on other sites

This is how my car sounds normally   (The noise in front of the car is 1 of the fans btw)



This is how it's supose to sound after 30minutes of driving(exactly like this wrx) and i feel a little loss of power

 

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883454
Share on other sites

So i drove my gf home tonight and came back home. When i parked the car in the yard i heard the sound 90% changed but i couldnt rev it. People are asleep lol.


I recorded this yesterday and this is how it's supose to sound. Like always 

 

Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883464
Share on other sites

  On 19/08/2018 at 4:09 AM, GTSBoy said:

They're both the same.  WRX one is just idling 300rpm lower than the "good" one.  Both sound normal but possibly with a slight miss.

Expand  

ye...they are not the same trust me. but then again it did not fully change. I'm sure if i drove a little more it would of fully kicked in and it will sound so disgusting and the throttle lags and feels week.
Sadly it was late night so i didnt want to rev the car and see if the sound also kicked in. I'd wake up the neighbors if i do lol

EDIT: Now that i remember. by this time if i turn on the ac it would idle to 400 then 900 and keep going up and down, or prob kill the engine. The AC thing only happens once the car enter this wrx sounding shit

Edited by Pastechi
Link to comment
https://www.sau.com.au/forums/topic/474723-i-need-help/#findComment-7883472
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...