Jump to content
SAU Community

Recommended Posts

As the title says iv been in the market for a manual r34 gtt coupe for a few months now. Watching how the market is going im seriously starting to consider buying an auto r34 gtt and then just paying for the conversion (and mechanic labout cost)

The price range between a manual and an auto is insane. Iv been tracking a fairly clean r34 GTT 2 door for a little bit around 14k, however if i wanted to buy a manual version of the car i would be looking at something around 19-20k 

Is that big of a price range practical or should i just buy a full conversion kit for around 1800 and pay a mecahnic to swap it for me?

The usual answer is "don't take it on unless you are able to do it yourself". Perhaps that's less so for gearbox conversions than turbo engine swaps, but it's been the usual advice.

However, where there are availability issues and the price difference is that wide, sure it's practical. I did it to my R32 many many many years ago.  It's not difficult, just need all the things and enough skills to make the wiring changes, etc.

If you can do it yourself sure, but you want to be sure of what you're getting in that particularly "Conversion Kit" because $1800 won't get you very far if you're buying all parts brand new.

So yes, but just be careful and mindful that extra costs can pop up, especially if you want to do everything 100%

The conversion cost is about ~1k-1500 for a mechanic to do if for you, so think closer to 3500-4K installed and running.

After that your only issue is the auto steering wheel, but you can always use the buttons to trigger something if you want to get fancy. It is worth doing if you find a really nice auto 34 that is unmolested or has the (other) modifications you are looking at.

There are quite a few conversion threads so go through them and make a list of all the things you will need - many conversion kits do not come with e.g. gear lever (c/w knob and boot) centre console, complete clutch including flywheel, clutch pedal and hydraulics, handbrake, speedo drive,  the list goes on so make sure you write everything down (it will be a long list) and compare it with what you get with the kit. Here they are asking 2,500 to 3,500 for a kit and then you don't always get all that you need. Most importantly make sure its a proper RB25 "big box".

I converted my C34 Stagea because manual ones were/are so rare but if I were you I would keep looking for a manual Skyline.

If you can find a decent auto, i say go for it. Mine was auto and i only coverted to manual 'cos it was time' but i see nothing wrong with going that way - as you say, can be a huge price difference when buying the car in the first place. My conversion kit was 1750aud and i wouldnt have spent anymore than that. By the time you buy a decent new clutch kit, 1piece clutch line, new cylinders etc, better off just getting tailshaft, box and pedals unless you get a cheap full conversion kit.

  • 2 years later...
On 5/8/2019 at 11:33 PM, KiwiRS4T said:

There are quite a few conversion threads so go through them and make a list of all the things you will need - many conversion kits do not come with e.g. gear lever (c/w knob and boot) centre console, complete clutch including flywheel, clutch pedal and hydraulics, handbrake, speedo drive,  the list goes on so make sure you write everything down (it will be a long list) and compare it with what you get with the kit. Here they are asking 2,500 to 3,500 for a kit and then you don't always get all that you need. Most importantly make sure its a proper RB25 "big box".

I converted my C34 Stagea because manual ones were/are so rare but if I were you I would keep looking for a manual Skyline.

Do you have links to said parts?  The problem with old forums is there are a bunch a broken links, missing pictures etc. 

On 7/10/2021 at 1:17 AM, walperstyle said:

Do you have links to said parts?  The problem with old forums is there are a bunch a broken links, missing pictures etc. 

I recently did a manual swap on my Stagea - here is the guide I used for that and a lot of it is the same for the skyline. Of course any mention of 4WD doesn't relate to you.

 

I also made a video of the process 

 

  • 4 weeks later...
On 7/10/2021 at 7:59 AM, mosquitocoils said:

I recently did a manual swap on my Stagea - here is the guide I used for that and a lot of it is the same for the skyline. Of course any mention of 4WD doesn't relate to you.

 

Question:   I have a R33 GTS-T RB25 automatic in my R34 GT-T.  I also have on the bench... a pull type AWD staega transmission with bad gears, AND a Z32 TT transmission in great shape.    Is it going to even be possible to swap bellhousings from the AWD pull type transmission over to the Z32 and achieve a manual swap?  A spec clutch just came up for grabs, still in package, but I don't know if I can even use it.

Edited by walperstyle

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agree with Rob. I recently did mine and replacing with a brand new unit made the most sense compared with rebuilding my existing gearbox.
    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
×
×
  • Create New...