Jump to content
SAU Community

Recommended Posts

I have changed my front to evo with alpha omega racing so it is running evo 6 caliper and big routers

 

rear is stock and all corners rebuild with red stuff pads

 

fluid is dot 4 castrol racing and braided lines all around

 

i also bought brake stopper to stop master cylinder travel 

 

i have a horrible softbrake but if pushed it will stop hard

hate the feeling though as front are 4 pot rather than 2

 

i am also looking to install evo caliper and 370z rear disc which is big brakes rear

 

i think that will make brake feel worse

 

would installing bm57 help?

 

seen various feedbacks people stating larger cylinder like bm57 makes it even softer 

 

i don’t know much about master cylinder and what brake bias i would have but looking for some advice

 

it is on r34 gtt

Link to comment
https://www.sau.com.au/forums/topic/480381-bm57-master-cylinder/
Share on other sites

9 minutes ago, drifter17a said:

seen various feedbacks people stating larger cylinder like bm57 makes it even softer

Not possible unless you f**k up the bleeding.

What do the ratios of piston areas look like, Sumitomo caliper vs Evo caliper? Surely you did this research before you bought the kit.

 

I went from GTT brakes to an 8 pot KSport/D2/Attakd/Clone kit. I had similar symptoms to OP.

I noticed that people who had GTR's who upgraded to the brakes I bought said they had no brake feel issues.
I noticed that people who had GTR's who upgraded to Evo brakes and they said they had no brake feel issues.

The BM57 was a night and day difference, much firmer.
I got annoyed at it for many years. Just buy a BM57.

I did the Evo Caliper/Evo10/ Alpha Omega front conversion on my 34 over Christmas

From a few people I'd spoken to via a FB group, series 1 R34's had a BM44, and series 2 has a BM50

The BM50 has L5 cast onto it, the BM44 has L4 cast onto it

People with the BM44 had issues with the ABS not kicking in if you jumped on the brakes hard. Someone mentioned it was a volume issue

Mine with the BM50 seems to work great so far.

I had a similar issue about with a squishy pedal when I swapped to 33 brakes on my 32. I put the calipers on the wrong side, and couldn't bleed the brakes as the nipples were at the bottom :D:D Looking back that was pretty funny - check the bleed nipples are at the top

 

42 minutes ago, Unzipped Composites said:

HFM sell a BM57 master cylinder for around $150. At that price, how could you not?

BEWARE

I read bad things about the HFM one.
I also found out that Z32 BM57's are NOT the same. The knee point on the Z32 one will lock your rears much longer before they start to engage the fronts. The GTR ones are the ones you want. There's a R34 and R33 version. What's the difference between those? I have NFI. I got the R33 GTR version and the clip does work on a R34.

My R34 had nothing labelled on it's BMC, only a L6... which isn't L4 or L5!

IMG_20200228_184326.thumb.jpg.e666db7dc0f8606e8602b12c9c1bfc96.jpgIMG_20200228_184313.thumb.jpg.e5bc89a5f9b68374ace3422c2ae312cf.jpgIMG_20200228_184344.thumb.jpg.6cb75bc33bb37bebeb91d8a578d19059.jpg

 

6 hours ago, Kinkstaah said:

I went from GTT brakes to an 8 pot KSport/D2/Attakd/Clone kit. I had similar symptoms to OP.

I noticed that people who had GTR's who upgraded to the brakes I bought said they had no brake feel issues.
I noticed that people who had GTR's who upgraded to Evo brakes and they said they had no brake feel issues.

The BM57 was a night and day difference, much firmer.
I got annoyed at it for many years. Just buy a BM57.

Exactly the same here but on a GTST R33 - same front brakes, same soft pedal, same years of annoyance - the BM57 made a huge difference.

3 hours ago, Kinkstaah said:

BEWARE

I read bad things about the HFM one.

I searched around and saw a few posts to this extent, but it was always reference to having read bad things, I never actually found a post written by someone who had a bad experience and what the issues were. There's a few good reviews on their website, not that those carry a lot of weight.

 

We'll find out anyway, I've ordered one for my car. Figured it was worth a punt.

2 hours ago, Unzipped Composites said:

I searched around and saw a few posts to this extent, but it was always reference to having read bad things, I never actually found a post written by someone who had a bad experience and what the issues were. There's a few good reviews on their website, not that those carry a lot of weight.

 

We'll find out anyway, I've ordered one for my car. Figured it was worth a punt.

The only thing I found from it (other than "I heard it was bad") was that it had the same bias as a Z32 BM57, which holds 50/50 split much longer (double) than a GTR one which splits to 60/40 much earlier.

In other words, expect more rear bias with the HFM/Z32 BM57. Doubt anyone would notice it unless you tried both back to back in different cars though.

22 hours ago, Kinkstaah said:

The only thing I found from it (other than "I heard it was bad") was that it had the same bias as a Z32 BM57, which holds 50/50 split much longer (double) than a GTR one which splits to 60/40 much earlier.

In other words, expect more rear bias with the HFM/Z32 BM57. Doubt anyone would notice it unless you tried both back to back in different cars though.

If that is the only issue, then it isn't exactly an issue and more just something to be aware of and have in your mind if you get rear brake lock ups. Realistically, there's no saying standard distribution is more suited to a car than more rear bias. There's so many things affecting that, so standard bias on a modified S-chassis isn't necessarily the best anyway.

 

I would consider leaking and poor fitment as issues to beware of, but I shall endeavour to report back on this once the car hits the track again. If it's not poor quality, then it may still be a very good cheap option.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...