Jump to content
SAU Community

Recommended Posts

Hey guys,

 

My precious rb26 blew its stock turbos on my way home earlier this summer. R33 gt-r 95mod.

I just did a compression test now (cold engine), and got these readings:

 

Cylinder 1: 155 psi

Cylinder 2: 155 psi

Cylinder 3: 160 psi

Cylinder 4: 145 psi

Cylinder 5: 140 psi

Cylinder 6: 135 psi

 

Now keep in mind the engine is cold.

I’d like to hear your opinion on these readings? 

Link to comment
https://www.sau.com.au/forums/topic/481035-blown-turbos-help/
Share on other sites

Sorry but it doesn't look good. When the exhaust wheel lets got at 150,000rpm, ceramic pieces have enough velocity to travel against the exhaust gas, through the open exhaust valve, and scratch the shit out of the cylinder bores. Happened to me when I first got my car, and I guess it has just happened to you.

A borescope could be used through the spark plug hole to inspect the bore for scratches.

If that has occurred, you need engine out bottom end rebuild, with bored out cylinders and oversize pistons. Expensive, but not compared to GTR prices these days....

  • Like 1

Blown turbo doesn't automatically mean his turbine wheel grenaded. Now with that said, the difference you have in compression between cylinders isn't great. Report back on a warm engine.  

  • Like 1

Buy this.

https://www.ebay.com.au/itm/8MM-HD-WiFi-Endoscope-Inspection-Camera-Waterproof-for-iPhone-PC-iPad-Samsung-AU/163440076341?_trkparms=ispr%3D1&hash=item260dc9a635:g:ofMAAOSwsPNcGhBL&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkfOCvCjTOBWK8pwriaolq5l3YoyuRM1%252B5hQF96Q9VN70RMc3%252BYWb9Tsc4TGw41eT3TQyUnv930nBOYpCpeC0DLYi7CxMTZyPioOoOXgQasbGPlG6QtpP4pYAS6Fwp8lyvvZts9%252BMI7tKcAxRtSZg3PJaSRXesma1BQe9Y7Kk0x3lSKjtYvm8qvSbcGe6Le3XGCKqKt5N5%252BpmvMtHRRXcSMV7vH6cH2a1pfxad7lFk9REJ%252Fs9T%252FxkpiEeVzDso%252FxydMWoLVe1u58T95RoHmLBtO7UIuxhfvPW3Iwi0mSO1EhyhN%252BoIO%252FymShnXkKaBlgrverdWmmwCbiAxDdOJF9aVLKX3JZUC%252BRtHPIhIDYo9ycOshD%252B5hpeoZWH6aXXeWU%252Fi2T33k3JYi9Ww5oOdwTKLoigaAHGwopMekvh6MThpmeZVA0yFlG7%252FjqbXqMJtd%252FmENiHbwrQXc1QUAnEZr7dGv6vpcB3sHdkcVM67Xnr%252F%252FH3yBsbLHavof5BBTxjSoagT2C2akfcq8wyteFQCNP%252BE8eM2CNqVwN4mUDoYlN5f2Q1WbTtdXKDtkB7V%252BsuNLiZTPLCpyBR%252BubPJeKl1SsS%252FQLpW7nlSkqYn%252B82yIyrazSiJyR4QI%252BZpMZjKEdD8nPgDFbaKcvPK86w2c9Xtx1G4%252FkI6lHclPYp097es4WMhHReOO4KjHTLfLU8wtmotJTjP7q4pHEWo6lXcmHLGEHVVAyK%252BJ5mdYoG%252Fc6nO7DO48l8qMbgdbmxaWLlzkT78ScXaWWCP9FklM%252B8LYCnKMqZUBg%253D%253D%7Ccksum%3A163440076341da5adf177ea64ed6b78adc0d6112fd23%7Campid%3APL_CLK%7Cclp%3A2334524

 

  • Like 1
6 hours ago, TurboTapin said:

Blown turbo doesn't automatically mean his turbine wheel grenaded. Now with that said, the difference you have in compression between cylinders isn't great. Report back on a warm engine.  

Agreed, but the concern is all 3 rear cylinders are well down which matches an issue with the rear turbo affecting cylinders 4-6

  • Like 1

Guys,

 

As i’m quite new to this, please excuse me if my questions are «stupid».

 

I thought about doing a compression test with a warm motor. But seeing as there might be a chance i have ceramic dust in my engine, wouldn’t it be damaging (or cause more damage) running the engine till it’s warm?

don't worry about it mate. if that is the issue you won't make it worse warming it up.

back to an earlier question what did you mean when you said the turbos were "blown". potentially an overboost issue could end up with ring land problems on the rear 3 cylinders too, but either way it is the same solution (pull engine and tear it down)

Alright, thanks.

What happened is i did a small pull, probably overboosted and the rear (i assume) turbo said farewell. It cut boost during the pull, and it started coming blue smoke from the exhaust. 

 

Seeing as i intend on keeping her for a while, an engine rebuild wouldn’t be so bad i guess :) 

Hello again,

 

Sorry about the late update, i’ve been busy due to work.

I did another compression test today with the engine warmed up, and i got these results:

 

Cylinder 1: 168psi

Cylinder 2: 171 psi

Cylinder 3: 170psi

Cylinder 4: 165psi

Cylinder 5: 155psi

Cylinder 6: 158psi

 

What are your thoughts?

3 hours ago, Oddamannen97 said:

Hello again,

 

Sorry about the late update, i’ve been busy due to work.

I did another compression test today with the engine warmed up, and i got these results:

 

Cylinder 1: 168psi

Cylinder 2: 171 psi

Cylinder 3: 170psi

Cylinder 4: 165psi

Cylinder 5: 155psi

Cylinder 6: 158psi

 

What are your thoughts?

That looks good to me!

  • Like 1
1 hour ago, Oddamannen97 said:

Alright, thanks. Is it necessary to do a leakdown test as well?

It's a while you're there deal, you might as well to give you a little better insight as to the state of your engine. But nonetheless the numbers look good.

Edited by trel
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...