Jump to content
SAU Community

Recommended Posts

Hello everyone! I just got back from Iraq I spent 2 years there. I was deployed with as a soldier and after that I started working as a private contractor. Long story short due to the troop withdrawal I was able to come home and pick up this R32 GTR from RHDSpecialty. It is a 1994 R32 GTR in crystal white with a Nismo 320km/h cluster, Nismo gauge and a Kakimoto exhaust (I recently swapped to a Tomei Expreme Ti). I have been wanting a project car for the longest time but never had the funds and now after working 12 hours 7 days a week for 1 year in Iraq I was able to buy this legendary machine. I plan to clean up the engine bay and take care of the small rust that normally will come with this 26 year old car. Any inputs on body work and rust prevention will be greatly appreciated it!

1.jpg

2.jpg

3.jpg

4.jpg

  • Like 3

Welcome, 

That's a massive effort staying in Iraq for that long (I spent an 8months in Afghanistan years ago ) 

Looks pretty good at the moment. I don't have any experience with R32 bodywork but new suspension bushes and ball joints does make them a lot nicer to drive. 

26 minutes ago, PranK said:

Not much better than a white R32 GTR. Well done.

I'm envious at how much space you have to work on the car!

:welcome:

 

Yeah, the space belongs to my dad. He has a retirement home on 45 acres of land and this warehouse to myself. I get to bond with the car and bond with my dad lol.

31 minutes ago, robbo_rb180 said:

Welcome, 

That's a massive effort staying in Iraq for that long (I spent an 8months in Afghanistan years ago ) 

Looks pretty good at the moment. I don't have any experience with R32 bodywork but new suspension bushes and ball joints does make them a lot nicer to drive. 

I'll definitely keep note on that!

That's really tidy. Nice work. Treat it well and don't butcher it.

It looks like someone may have already done some work on the front suspension towers. That grey seam sealer around the tops is not original. Not saying it's a problem, just pointing it out.

 

  • Like 1

Chassis rails / sills, strut towers (as @GTSBoy  has pointed out), spare wheel well and passenger foot well (heater core) are the areas that I am aware of.

But there can be others depending on how far north the car spent most of its life.

  • Like 1
18 hours ago, GTSBoy said:

That's really tidy. Nice work. Treat it well and don't butcher it.

It looks like someone may have already done some work on the front suspension towers. That grey seam sealer around the tops is not original. Not saying it's a problem, just pointing it out.

 

I was curious about the sealer also. all of the R32 I was looking at in the market did not have this so I'm curious also to see what was done when it all comes out.

Started to remove more things off the car. I spent a lot of time labeling all the connectors from the harness. No way in hell I was going to remember where every single connector plugs into. My dad also gave me this massive LED light for the warehouse. The warehouse that came with the retirement home he bought had poor lighting or did not work. Shines super bright and I was able to conduct work at night instead of racing until the sun came down. 

5.jpeg

6.jpeg

  • 2 months later...

Life got in the way and I was finally able to come back to the R32. Man this is my first time ever fooling around with an engine removal and I'm breaking my engine removal virginity with an RB26 and holy f*ck this has been a pain in the ass! There is almost no room to do anything once you get to the plenum. Don't get me started with the top two tranny bolts. I was struggling horribly when it came to disconnecting the trans from the engine. After doing a little more research I realized this had a pull type clutch which required the throw out bearing to be released. So instead of releasing the throw out bearing I just released the fork instead.

130852243_1860101984165982_7743502363854409434_n.png

Engine 1.jpg

Engine 2.jpg

Engine 3.jpg

Engine 4.jpg

Engine.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...