Jump to content
SAU Community

Recommended Posts

Well there has been big progress with the car.
Got the diff sorted, stripped and inspected. Clutches were glazed so had that sorted and everything inspected, reset the lash as was a little on the loose side and fresh oil. All good and so much nicer.

While it was up getting diff put in decided to raise the rear 5mm to put a bit more weight forward, have the sil80 setup like this and helped heaps.

Now the brake pedal feel hasn't been great since fitting the gktech/holfords BM57. They have been bled multiple times but pedal has been long the firts few times and never consistant. So deceided to check the booster rod engagement and it was not good being around a 1.2mm out. So adjusted that and pedal feel was really good and similar to other cars with BM57 I have.

Next was a wheel alignment but before they started I had a look over all the steering rack........................ Found the solid bushes were not holding it in place. Had to remove and use a few different shims but got it in there and its not going any where now.

The alignment on it from the local guy was absolutely sh!t, his machine definitely needs calibrating.

The guys at Keith4Wheels have set me up with a base setting to work with that is a little on the sedate side but guaranteed me it would be good to start from, They were not wrong. Worth the 40min drive for me.

Working part time for a company that runs track/drive days helps when you want to test your car 😁
Spent 3 days at Lakeside Park testing on different layouts and the car did not disappoint.

Day 1 was out on what is a Driver Training Course and a small grip layout. Straight up first corner was great and after 3 laps with tyre temps coming up the car was so good turn in and rotated smoothly. Next few times out started to get more confident with the throttle but car kept taking it and a few small slides but it kept going straight and gripped up nicely.
20221218_074711.thumb.jpg.5696869cd81e9f66e193bce52e940197.jpg

Day 2 was a reverse layout of main track from Bus Stop down Karrussell to the start/finish line with some chicanes. This layout is awesome and real good test. After a few runs with tyres and brakes up to temp started pushing and quickly found the limits at much higher speeds with understeer and rear wanting to slide more. Had a bit of think and tried a few different things with pressures and dampers and after a few more laps ended up 43.71 and 4th behind a r35 dual entry and a tesla on semi's. Very happy with that outcome.

Day 3 was a another small grip layout event and pretty much used the car as demonstration and passenger rides. Again it performed great with no issues.

20221217_105305.thumb.jpg.28fe47aa37dea14cfeb5ced7a7d9d0f8.jpg

May be an image of 1 person, car and road

This was my 4th fastest lap of the day. The gopro decided to do gopro things on my other laps.
 

 

Overall stoked with the car now. Didn't have to put a spanner to it over 3 days just fuel, check fluids and tyre pressures.

I did have the car for sale for a few weeks as I got offered a compete stroker sr20ve 600hp, motec , rb gearbox setup for the s15 but have passed it up. Better to have a running race car than another project non running race car. Will start gathering parts soon for another sr20 setup for it.

So the plan is to go over the 180sx bolt check, change fluids, adjust wheel alignment and rotate tyres on wheels ready for some track time at the end of January 2023.

 

  • Like 4
14 hours ago, admS15 said:

Solid progress, car looks pretty rapid 👍

 

27 minutes ago, bcozican said:

how good is it when the car just works !  well done mate

 

alot of hard work to get it there tough good times on track though 

Cheers guys, car is super quick as it is but will be turning up next year after a few more events.
All the effort was worth it. It definitely tested my commitment wanting to drive.

  • Like 1

You're allowed to wear shorts? 

We have a long way to go in NSW lol.

The mighty SR20, doesn't just spontaneously break for no reason like a RB.

 

 

  • Like 1
1 hour ago, Dose Pipe Sutututu said:

You're allowed to wear shorts? 

We have a long way to go in NSW lol.

The mighty SR20, doesn't just spontaneously break for no reason like a RB.

 

 

its not run under the nanny MA rules 😂
Took me a bit to get use to it but so good on hot days. Its non competitive with timing for reference really should see some of the other events we do.

Well my rb hasn't had any problems in 11 years.........

Been toying with the idea of a v8 race car as really like to see cost and reliability compared to the 4 & 6 cylinder. Just don't know if worth the effort of going through all the hassle of engine swap and then do you go 'Merican or Japanese.

heres the Boss mans run in his r35 GTR for comparison
https://fb.watch/hx430gYXsR/

Edited by robbo_rb180
  • Like 1
1 hour ago, robbo_rb180 said:

its not run under the nanny MA rules 😂
Took me a bit to get use to it but so good on hot days. Its non competitive with timing for reference really should see some of the other events we do.

Well my rb hasn't had any problems in 11 years.........

Been toying with the idea of a v8 race car as really like to see cost and reliability compared to the 4 & 6 cylinder. Just don't know if worth the effort of going through all the hassle of engine swap and then do you go 'Merican or Japanese.

heres the Boss mans run in his r35 GTR for comparison
https://fb.watch/hx430gYXsR/

V8 in small bay can be a bit of a cluster like clearing steering rack, etc.

But, I think you'd be happy to spend the money to build the crazy manifolds etc :P

 

what insurance scheme is Skid Control run with?

Are they carrying pub liability and that sort of thing that MA provides?

1 hour ago, MBS206 said:

V8 in small bay can be a bit of a cluster like clearing steering rack, etc.

But, I think you'd be happy to spend the money to build the crazy manifolds etc :P

 

what insurance scheme is Skid Control run with?

Are they carrying pub liability and that sort of thing that MA provides?

The work/cost to make a good set of headers fit isn't too bad a friend made 2 inch primary tubes work in his s13. One of the plus for v8 is gearbox good to go with out need for adapters and some great support for gearsets. Then it's just finding the right ratio to work with it. Having torque everywhere would be nice too 😁

Yep got all the right insurance. We mainly have a lot of first timers at a driving event so not going to hard and in their dailys too. 

  • Like 1
9 hours ago, Dose Pipe Sutututu said:

That's awesome man! Envious tbh!

It has been but I don't push mine as hard as you do. Happy with just over 300kw but I am jealous you have Air con in yours.

Haha I can really only use the AC on the cool down laps.

I tried having it on when I was racing, yeah quick way to boil the coolant LOL. Although this was with the old condenser, which was all mangled.

  • Haha 1
On 12/21/2022 at 10:38 AM, Dose Pipe Sutututu said:

Haha I can really only use the AC on the cool down laps.

I tried having it on when I was racing, yeah quick way to boil the coolant LOL. Although this was with the old condenser, which was all mangled.

Normally don't want it on anyway. They don't like high RPM. One of the reasons that the stock ECUs will disable the compressor at full throttle or high RPM.
Good for a little extra engine braking though :P

  • Like 1

Of course you don't have it on while on track, good to cool down while in line up or pits.

I know exactly what most OEM do with AC switching at pressures (low & high), temps, rpm and tps. One of my trades is refrigeration 😛

  • Like 1
10 hours ago, Dose Pipe Sutututu said:

Should I turn it off at a lower RPM set point?

Im my head I thought 5000rpm seems reasonable lol.

5000rpm is good along with 70% TPS. Could wire a pressure sensor in and track pressures to find where system is efficient too and switch the condenser fan as needed. 

I am interested in this kit, the compressor and condenser efficentcy will be a massive improvement
https://frenchysperformancegarage.com/collections/cooling-and-air-conditioning/products/fpg-nissan-skyline-r32-a-c-air-conditioning-replacement-kit-r134a-fpg-039

  • Like 1

For what it is, it's pretty damn good value that FFG kit. Imagine trying to source an OEM compressor and OEM condenser? you would have bought that kit a couple of times.

Yeah, if you could even find a second hand one....great to see businesses putting together aftermarket options where the factory stuff is not available or is showing it's age.

  • Like 2
18 minutes ago, Duncan said:

Yeah, if you could even find a second hand one....great to see businesses putting together aftermarket options where the factory stuff is not available or is showing it's age.

might even work better than the OEM Nissan stuff!
 

I find JDM ACs are never as good as our domestic cars (of the same generation), I suppose it doesn't get that hot over there either so it was never built to support our climate.

  • Like 1
5 hours ago, Dose Pipe Sutututu said:

might even work better than the OEM Nissan stuff!
 

I find JDM ACs are never as good as our domestic cars (of the same generation), I suppose it doesn't get that hot over there either so it was never built to support our climate.

My R33 had great AC. Was like a freezer box inside.

Note... HAD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...