Jump to content
SAU Community

Recommended Posts

Ah shit man, that sucks.  I really feel for you.  Car ownership can be such a bloody painful experience at times!  The highs are high but damn the lows are low......

I'd be guessing at cracked cylinder based on what you're saying.  MLS head gaskets are pretty good (provided block and head are  prepped perfectly) up until big power runs/massive boost so if it's happening at idle in the shed most likely block.

Please let us know how you go and then a rough time frame until your Bullet Billet RB30 block turns up! 😝

Nissan RB30 Billet Block – Bullet Race Engineering

  • Like 2

Not sure if you've read this thread

The Nissan gods will hate me, but....meh, no love lost there

Probably alot cheaper than a billet RB, and parts fall out of the sky where you live

  • Like 1
On 4/9/2022 at 4:06 PM, r32-25t said:

Good luck getting the front diff on the bottom of an LS

The adventra has a diff under an LS. That's likely  not helpful at all in a skyline though.

Sorry to here mate, so this means another SAU build thread? 
Might be able to help out with some front end parts when mine is done, I’m sure there are parts I’ve bought more then once! Lol 

After some thorough inspection we cannot find anything at all wrong with the head or block. how ever we did find an area of the tomei head gasket that looked complete blown out. ive done many never had an issue but this car seems to bring out the worst in eveyone so maybe i pooched it. throwing another head gasket in and trying it. thanks for the help and support. cheers

 

  • Like 1

The block was cracked on outside right from the start I don’t think the prp brace could help it was to late. Thet cracked is fixed with jb weld. And here’s a photo of what I think is the blow out in the head gasket. Can even see little burn marks. I compared it to the gasket I knew was good when I pulled this motor apart the first time to fix the valve guide that was leaking and the old head gasket doesn’t show the same signs as blow out...

00FE92C2-D192-4094-950E-699D4195649F.jpeg

ECFBBD56-8A3E-445C-84B2-B287185700DB.jpeg

8C0274A7-A0F6-4003-9C99-E0B02CA16CAB.jpeg

On 09/04/2022 at 4:23 PM, Dose Pipe Sutututu said:

Time to find an AWD Stagea block, unicorn they reckon.

Or 2JZ swap, 500kW at the wheels stock motor on stock studs lol.

 

I sware by the stock motor buddy, the motor before this built one was a stock beast! It was killed by a triple plate clutch or I guarantee it would be still going.  Found this little guy too today...like gtsboy said it’s probably gunna crack on the other side....already was lol. I don’t feel I should continue with this block as my pistons and everything else are still good and could go in a new block. I can get a brand new block for 3600 Canadian dollars from boost factory here in Calgary.

299EEC40-B591-44F3-850A-F60BDBD22844.jpeg

  • Like 1

I say this with a good Attitude, I love my car it’s an absolute animal and it handles great but damn the rb26 just doesn’t have the meat it needs to be strong and other than the sound and the power they “can” make I struggle with the fact of how thin they are. Compare it to a 5.9 Cummins it’s just hilarious haha I know it’s apples and oranges but the theory of overkill to me is awesome. Anyway cheers for everyone’s help throughout. I will be back just need to make a solid plan. More attention to detail on the next what ever that’s for sure.

Edited by MoMnDadGTR

Yep sadly that block is for the bin.

Is the crack near the stud adjacent to the head gasket failure?

Did you replace or reuse the head studs?

How confident are you the crack was not there prior to this build?

I have weird luck because I have an sti at 500hp stock motor that I just can’t kill. All my stock rb26 lives well at 500whp. The moment I ever build a motor they always break Haha. I should stick to tree cutting lol. This block snapped at 22psi that’s a joke to me. The rb let me down bad this time.

On 09/04/2022 at 6:14 PM, Duncan said:

Yep sadly that block is for the bin.

Is the crack near the stud adjacent to the head gasket failure?

Did you replace or reuse the head studs?

How confident are you the crack was not there prior to this build?

I think the crack could of been there before yes Duncan. And no the crack is near the middle on exhaust side on the deck. I bet I could run it but it wouldn’t last. I used new studs and gasket 

If I was rich I would send it and see what it could handle, but my heads still good so I’m going to be smart while im ahead. Behind....but ahead. When your oil looks like a toilet bowl at a cheap motel. Lol

B94F87A7-82D4-4ACE-862C-663D1EE4E8E0.jpeg

Edited by MoMnDadGTR
  • Like 1

Cracking around the head bolt holes is common, it’s why I had to throw my block away. I ended up going billet because they fixed all of the rb26 problems and hopefully future proofed for life 

On 09/04/2022 at 6:27 PM, r32-25t said:

Cracking around the he’d bolt holes is common, it’s why I had to throw my block away. I ended up going billet because they fixed all of the rb26 problems and hopefully future proofed for life 

this is all fine and dandy but a little out of the budget i was thinking rb30 run it at 650whp call it a day. can get them from prp with a  brace for a decent price...

Platinum Racing Products - Platinum Prepped RB30 Block

On 10/04/2022 at 9:07 AM, MoMnDadGTR said:

brand new block for 3600 Canadian dollars from boost factory here in Calgary

Might be worth getting it and saving it for the future.

They're worth big money now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...