Jump to content
SAU Community

Recommended Posts

Hi guys,

I've bought my first gtr and wanting to convert to a single turbo high mounted.

 

can people share what they have paid for their gtrs to be converted 

in Perth looking for recommended workshops also 

 

thanks ! 

1 hour ago, Dose Pipe Sutututu said:

Don't forgot to factor in the boring stuff too, like fuel system, electronics pack, clutch, etc.

That's only needed if you want to make sure it's all good, and safe, and reliable, and runs etc.

 

I reckon I could do it for farrrrrr less than these guys are saying.

Fab up a dodgy pipe to go from the twin exhaust outlets to one, a turbo from Bunnings for $400, then fab up a new outlet pipe.

 

I reckon I could do a high mount turbo for under $2k... Now whether the motor grenades when it comes onto boost the first time... That's a different question. And I'd hope, being a Skyline, especially a GTR, there is more put into it than a dodgy Bunnings turbo... :)

  • Haha 2

It will blow out fast.

$3k for turbo, could easily be a bit more.

$2k for manifold, at the lower end, and therefore likely to be more.

$1k for dump, could easily be more.

$1k for coating these things, really should be done.

$1k for desirable extras, like EGT ports, EMP ports, heat shielding. Hell, probably more like $2k.

You get close to $10k just for the main parts, without pipework fab, gaskets, fasteners, labour.

$15k is rock bottom. If you need intercooler, fuel system, clutch, ECU, you're pushing $30k. It is just too easy to spend money.

Call it $60k, to factor in a basic rebuild too.

Oil pump will go bang, and/or head will shit a shim and many sads.

Just build the motor at the same time as upgrading the turbo. Nitto oil pump, big ass sump, head to sump vent/drain, fix up all the flaws.

 

12 hours ago, thejacksta88 said:

Hi guys,

I've bought my first gtr and wanting to convert to a single turbo high mounted.

 

can people share what they have paid for their gtrs to be converted 

in Perth looking for recommended workshops also 

 

thanks ! 

Very open ended question.

the main things would be, what is already done to it, what is your mechanical knowledge/ are you paying for someone to do all the work? and what sort of power/ use for the car are you aiming for?

you could eBay all the parts and have it cheap and nasty or you can do it properly. (the first option usually requires you to do the second option later on to fix the mistakes)

realistically paying someone and buying all the parts without cheaping out is not going to leave you much change from $15-$20k depending on turbo, ecu and clutch choice.

Basically by the time you buy the manifold, turbo and waste gate then get all the fab work plus an lines for water and oil and add Labour it’ll come to 10-15

  • Like 2
11 hours ago, Murray_Calavera said:

What is already done to the car? 

Hey mate completely stock apart from front mount.

 

I think I might stick with twin turbo set up and go upgraded turbos.

 

Exhaust - tune 

I'm not after major power just something nice and responsive 

  • Like 1
15 hours ago, Duncan said:

Yeah I agree, 10k give or take. 

It'll go good after though.

Would you suggest staying with a twin setup but upgraded turbos  ?

Yeah, I probably would, because not everyone has that sort of coin to drop on a car. Depends if you want the last 1/10th of potential out of the platform

Plus, these days the cars are more like classics than a leading edge race car, so why do all that work when a nice pair of twins can still bring a smile

So guys I'm thinking I'll go 

6boost manifold

gt35-900 

50mm waste gate 

full exhaust 

Haltech platinum pro 

Walbro 255

do I need to upgrade coil packs and would anyone suggest drop in cams  ?

1 hour ago, thejacksta88 said:

gt35-900

First up, I presume you mean a G35?

And...

1 hour ago, thejacksta88 said:

Walbro 255

This is not a 900HP fuel pump.

and

1 hour ago, thejacksta88 said:

Haltech platinum pro

Why would you do this to yourself?

and

1 hour ago, thejacksta88 said:

do I need to upgrade coil packs

Almost certainly. Time for some pencil coils.

1 hour ago, thejacksta88 said:

would anyone suggest drop in cams

It's money well spent, so long as you don't stay stuck in the 90s and consider something other than the usual Jap suspects.

6 hours ago, thejacksta88 said:

So guys I'm thinking I'll go 

6boost manifold

gt35-900 

50mm waste gate 

full exhaust 

Haltech platinum pro 

Walbro 255

do I need to upgrade coil packs and would anyone suggest drop in cams  ?

You will also need bigger injectors.

your factory clutch will be living on borrowed time.

welcome to the rabbit hole that it skyline ownership

  • Like 1

Based on this - 

On 12/23/2024 at 2:28 AM, thejacksta88 said:

I've bought my first gtr

and this - 

6 hours ago, thejacksta88 said:

So guys I'm thinking I'll go 

6boost manifold

gt35-900 

50mm waste gate 

full exhaust 

Haltech platinum pro 

Walbro 255

do I need to upgrade coil packs and would anyone suggest drop in cams  ?

My advise is to find a local workshop that is trustworthy and has experience building GTRs to the level you want to achieve.  

3 hours ago, UWISSH! said:

welcome to the rabbit hole that it skyline ownership

Nek minnit the $60K I said earlier doesn't seem too far off the mark.

As an ex-skyline owner

Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch

As a idiot who cannot leave things alone

Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds

For a classic like a R32 GTR

Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again

And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over

The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts

A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k

My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline

SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage

Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car

 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...