Jump to content
SAU Community

Recommended Posts

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

Link to comment
https://www.sau.com.au/forums/topic/486127-how-old-is-too-old-for-tyres/
Share on other sites

Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!

  • Like 2

Yeah - 4 or 5 years is the limit for decent tyres.

Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause.

I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.

  • Like 1

Also, a tip for young players 

Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old

  • Like 1

If the tyres were fitted when new, I wouldn't expect much over 5 years of use. Especially if the car lives outside full time. 

If the tyres had been stored under ideal conditions and are being purchased new, I'd fit a set of already 5 year old tyres if I only expected to get 1 to 2 years of use out of them. 

I've purchased many a set of new (but quite old) tyres from St George Tyres when I just needed some decent rear tyres to drift on. 

Here is a pretty crazy example, can't say I've ever bought 11 year old tyres from them before though lol. 

https://www.stgeorgetyres.com.au/momo-tyres-245-45-17-outrun-m3-official-product-by-momo-italy.html

  • Haha 2
21 hours ago, PranK said:

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

1 hour ago, joshuaho96 said:

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

I've got 15 year old tyres on a car in my garage, holding air (holding it better than the daily driver does!) and no signs of rotting/cracking/drying out. Oh, and they've only been garaged the last 3. Before that they sat in a couple of different paddocks/yards, and even spent about a week underwater too.

However, weather and other environmental factors can really change how quickly they start to dry out and crack.

My understanding is that UV tends to accelerate the aging process. If the car has been garaged, then you could probably get away with extending beyond 10 years.

FWIW, in 2015, I had tyres on my 180B SSS that had a 3-digit code (2 for week, 1 for decade), ending in 0, so could have been more than 30 years old, but still worked fine. I did replaced them very quickly, though, once I discovered what the code meant!

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

  • Like 1
  • Haha 1
1 hour ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

I am now intrigued to go check the dates on the tyres on my Skyline...

We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).

 

I feel your tyres may be beating mine :(

2 hours ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)

 

PXL_20250222_103140228.thumb.jpg.b69a72861d9be2acef7880f8d53a73c5.jpgPXL_20250222_103349285.thumb.jpg.effffed8b1e7ef751183223cb8c3e392.jpgPXL_20250222_103357847.thumb.jpg.6ae9c122892af223103c9e18656b97c9.jpg

 

I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...