Jump to content
SAU Community

Recommended Posts

We can rebuild him Roy!!!

Looking like I will be staying in Vic a bit longer, while I'm not off travelling on the job. Waiting to hear of confirmation of the actual job. Systems Engineer for a wheeled armoured vehicle fleet hopefully.

  • Replies 409
  • Created
  • Last Reply

Top Posters In This Topic

BTW - for all you arm-chair racers out there - V8 Supercars 2 came out on PS2 yesterday.

I picked up a copy and have to say at an inital glance its 10 times better than the first one. Was very happy to find that not long into the game I got to drive an R34 GTR V Spec at Bathurst.

But anyways.... the Australian tracks are much better. Sandown was pretty good - except that the ripple strips are flat (Sandown they are like gutters in some places) and you can take the high speed chicane at the back far too easy. But still damn good to get some lap practise and work on those lines.

I'd say start at 40psi and we'll take it from there. Plenty of guys will have gauges / pumps. If you are happy with that then leave it - if you feel that grip is a bit funny you can experiement. But for your first time out I'd say start at 40psi and that should do you just fine.

Hey guys,

Quick question for team wang.......What kind of tyre pressures do you run at sandown? Oh and they are street tyres not cheaters :D

I found at PI that 42F 40R felt good but was maybe too high and with reducing to 38F 36R and dropping boost from 15psi to 11 psi I took 3 seconds out of my lap times.

There are 2 critical low speed corner exits onto the straights at Sandown that will cruel your laptimes if you get wheelspin out of them so try to concentrate on them.

As always it's easier to take pressure out than put it in. On road tyres I tend to find my first flyer is the fastest, then the tyres have worked too hard and laptimes drop off a little.

Marcus, there is nothing wrong with RB74's as a couple of dedicated race cars have discovered at PI over the last couple of months :D when I was trying to go under them in the braking zones.

Snowie, is that the codemasters game? I got it for PC and found it marginally better than the orig and not worth the money with the mods available for F1C99-02 that are quite realistic and the best of all...GTR, a sim of the Euro GT Racing champs (only a demo but better than anything else in the world right now). With my FF wheel and rumbling seat with double force drivers it is almost as good as the real thing. Good news is there will be track updates available and online racing leagues.

If your not running sticky tyres then i think you will find that RB74s will do the job.

If you are running sticky tyres then you could run into probs...i dont know.

I dont really know how hard Sandown is on brakes as i have never driven there, but RB74s have been fine for Eastern Creek and Wakefield, and Phillip Island though i never strung enough laps together to stress anything (apart from the driver and the engine:))

Im only looking at different pads because my RB74s only have one more day in them...so if i get track pads the RB74s will likely last another 6-9 months with just road driving

meh.

If you are running sticky tyres brakes don't matter at all...you brake heaps less due to higher corner speed so there is much less pressure on the brakes.

Looks like you are having heaps of trouble Roy, I'd suggest hiring a s2000....they are pretty good, and I hear it has new rear brakes lol.

Must get v8SC2, but I might just spend tommorrow with the beers and the big screen watching the real thing.....its nice to be home :)

Hey guys with 32s - I'm thinking of mounting my extinguisher in the passenger footwell against the door sill... any other suggestions?

I'm looking at mounting mine behind the passenger seat by running a piece of aluminium flat bar between the bolts at the back of the seat and bolting the extinguisher bracket to that. It sounds similar to whats described by Dominic in this thread, just behind the seat instead of in front. I couldn't find the bolt that duncan was talking about in that thread so maybe 32s don't have it.

I thought about putting it against the door sill behind the passenger seat cause theres a hole already there where the seat belt was originally mounted before compliance but its too hard to reach from the drivers seat.

Hopefully i'll get it mounted tomorrow. If i do i'll upload some photos.

Does a new extinguisher need to be inspected? I bought mine a few weeks ago from Big W and just noticed that theres nothing on it about being inspected. I thought they would need to be inspected before they could be sold. If it needs to be inspected where can i get it done and what should it cost.

In my 32, I have a strip of aluminium between the 2 bolts that hold the front of the seat onto the floor. It works on either side, but mine is mounted on passenger side, because Bride seat frame adjusing handle interferes on driver's side.

Like this:

269PICT0211-med.JPG

The bolt at centre-right is the bolt holding down the seat adjacent to the gearbox tunnel. The handle is the seat fore-aft adjuster.

...

If you are running sticky tyres brakes don't matter at all...you brake heaps less due to higher corner speed so there is much less pressure on the brakes.

True but you also come out of corners much quicker and with increased grip to the ground you can brake harder without locking a tyre making the pad and rotor absorb more energy...so i suppose it depends on how you drive

In my 32, I have a strip of aluminium between the 2 bolts that hold the front of the seat onto the floor. It works on either side, but mine is mounted on passenger side, because Bride seat frame adjusing handle interferes on driver's side.

The bolt at centre-right is the bolt holding down the seat adjacent to the gearbox tunnel. The handle is the seat fore-aft adjuster.

Don't think I can fit it there b/c of the transmission lump next to the transmission tunnel on the GTR... hang on I'll take a pic

See the transmission lump at the top of pic

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...