Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Wtf is a Stagea GTR?

To be precise an Nissan Stagea Autech 260RS

"Introduced to compete with the Subaru Legacy Touring wagon, the Nissan Stagea was launched in 1996 and featured a 2.5-litre inline-six engine. It was good for a claimed output of 276 horsepower, however the real ratings would have been closer to 293. Sending power to all four wheels, that model was good for a 0-60 mph time of 6.4 seconds and a 1/4 mile time of 14.5. Enter Autech and the Stagea 260RS. Using the Skyline GTR engine and driveline, the stated output remained at 276 but in reality that figure was now closer to 310. Besides a small increase in displacement from 2.5 to 2.6 litres, the Stagea Autech also employs a beefier rear anti-roll bar and a strut brace linking the front suspension towers as well as a mechanical limited slip differential for the rear axle and Brembo disc brakes with ABS all around to improve stopping power. The straight line performance, braking and handling is improved dramatically over the base model. If this this is still not enough though, a Nismo tuned version is available whose 0-60 and 1/4 mile times are somewhere in the neighbourhood of 5.1 and 13.6 seconds, respectively."

hehe I've got the origianl jap brochure for your car, I'll scan it for you guys when I get home. It might shed some light on the matter a lil. Also a quick VIN number check will prove the authenticity of that car, coz if its an original Autech 4 door then it'll say so on FAST.

Also just to let you guys know, while I was testing the software I'm writing last night I found a white 4 door R32 GTS4 that had gotten a full GTR conversion, RB26 and drivetrain plus Original JUN 4 Door GTR kit, which was as rare as hen's teeth. Its a 93 model as well. Selling for 2.5 million yen. Will post up pics later.

To be precise an Nissan Stagea Autech 260RS

"Introduced to compete with the Subaru Legacy Touring wagon, the Nissan Stagea was launched in 1996 and featured a 2.5-litre inline-six engine. It was good for a claimed output of 276 horsepower, however the real ratings would have been closer to 293. Sending power to all four wheels, that model was good for a 0-60 mph time of 6.4 seconds and a 1/4 mile time of 14.5. Enter Autech and the Stagea 260RS. Using the Skyline GTR engine and driveline, the stated output remained at 276 but in reality that figure was now closer to 310. Besides a small increase in displacement from 2.5 to 2.6 litres, the Stagea Autech also employs a beefier rear anti-roll bar and a strut brace linking the front suspension towers as well as a mechanical limited slip differential for the rear axle and Brembo disc brakes with ABS all around to improve stopping power. The straight line performance, braking and handling is improved dramatically over the base model. If this this is still not enough though, a Nismo tuned version is available whose 0-60 and 1/4 mile times are somewhere in the neighbourhood of 5.1 and 13.6 seconds, respectively."

Yes, yes, yes... I knew that... just curious as to why you called it a Stagea GTR when it's not.

Yeah it is that style of lights. I was thinking of doing the conversion to the coupe lights but it would involve too much. I would need to change the boot lid and the rear bar but and none of that would be a bolt on job on the curent rear end. So that means it would involve the cut and weld of the whole rear end.

hey funkymonkey, whats with the car above? is that the original look or did someone cut and weld? I got a 4 door and the rear end is totaly different, especially the lights.

It also has flared quarters and door add ons (to match the quarters).

Lots of work. but makes for a cool R32 4 door GTR look a like.

Richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...