Jump to content
SAU Community

Recommended Posts

  • 3 months later...
  • 1 month later...
  • 2 months later...

Hi guys,

When I imported our 250t RS4 I needed new shocks all round so stupidly bought the cheaper BC set instead of the BR. Now they are stuffed and our use for the car has changed a little. I wonder if anyone knows whether you can fit the RX suspension to the 250t rs4 and lift the ride height? Anyone have any experience importing stock suspension direct from Nissan Japan? Or know if you can do that via local Nissan dealers?

  • 3 months later...
2 minutes ago, Long and low said:

I have a set of BC gold adjustables to go in. Seems pretty straight forward to put in. I'll be doing it in my garage on my own. 

Thanks for that. I'm only doing the springs so expect to need a spring compressor. Bought them after a couple too many, now have to work out how to do it ??

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

47 minutes ago, Hertz Donut said:

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

Thanx for that.

  • 2 years later...

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

7 hours ago, INTHEKNOW said:

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

Have a look here it will tell you the part numbers and you can see if they match. 

https://nissan.epc-data.com/stagea/

 

  • Like 1
  • 3 years later...

Are people still active on here? Never used this site before so forgive me if I’m going about it the wrong way. 
 

wondering if anybody else has encountered issues with rim to rear suspension clearance, and has any remedies or ways around it that don’t involve beating the guards or smaller width rims. 
 

picture attached (is terrible I know) is of backside of rim barrel and coil over, can basically just fit a finger in between, which is fine on anything that is flat. But anything where the front and rear are hitting opposing angles the rims rub on the coilovers which is seriously unpleasant. Can’t run any less camber or the tyre rubs on the inner guard to much, and don’t really want to lift it up high enough to get more clearance off the coilovers 

 

appreciate any pointers cheers! 

IMG_0467.jpeg

IMG_0468.jpeg

IMG_0469.jpeg

IMG_0470.jpeg

23 hours ago, RBW49N said:

Is it an rs4 or an rs4s?

tou can fit an S14/5 rear subframe and suitable driveshafts if it is a factory auto and it will give more clearance

 

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

2 minutes ago, Yeevez said:

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

It will alter the track of the car and enable you to run less camber without hitting the outer guard and give the coil over clearance 

6 minutes ago, Yeevez said:

19x9 +30 I think in the back, not to aggressive really 

weird, I have standard r34 GTR wheels (18x9 +30) on my factory auto and they fit perfect inside and out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...