Jump to content
SAU Community

Recommended Posts

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Hey i saw the white Series 2 heading towards Seven Hills Shops on NYE too. It good to see a few more popping up around the area.

Has anyone seen mine S2 rego (BDS-22T)????

spotted silver ser1 with body kit on hervey bay esplinade looked nice, also I can't believe that after 4+ years of ownership I still have not been spotted :( I have waved to many fellow stagea owners but no spotted post :D anyway nice car who ever you were.

Edited by rb30dett
hey was it parked or driving ?

didnt see you tho unless you were one of the many drunks i drove past haha

Also today out side 'Rays Outdoors' in dandy plates were non other then ...... STAGEA

was gonna park in front of it but would of left you no room. looks very nice man

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

spotted a white Stagea on heatherton road about an hour ago with custom no plates.. forgot them though >.< thought it was you RBPOWA but wasnt lol

that one definitely could have been me probably dropping off the ball and chain lol

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

ahhh damn you, i wanted those plates !

there is a guy on here just by pure luck his plates are standard ones WGN-342 series 2 so it makes sense

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

westgate freeway Saturday think it might of been between 5-7pm if so that was me.

FTG ? fountain gate ? im around there alot , gf lives near by, but no smoke from me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...