Jump to content
SAU Community

Recommended Posts

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Spotted two yesterday (NYE), both on exactly the same area of the same stretch of road, but around 10mins apart.

The first was a silver s1 (rego BAY-76Z, I think), with some silver pinstriping on the tail lights in a rectangular pattern. The second was the white s2 that I've seen quite a bit in my area over the past year or so (rego COP-003). Both spottings were on Seven Hills Rd (aka Prospect Highway) right near the intersection of Station Road, and both cars were heading away from Abbott Road and the M2...

Hey i saw the white Series 2 heading towards Seven Hills Shops on NYE too. It good to see a few more popping up around the area.

Has anyone seen mine S2 rego (BDS-22T)????

spotted silver ser1 with body kit on hervey bay esplinade looked nice, also I can't believe that after 4+ years of ownership I still have not been spotted :( I have waved to many fellow stagea owners but no spotted post :D anyway nice car who ever you were.

Edited by rb30dett
hey was it parked or driving ?

didnt see you tho unless you were one of the many drunks i drove past haha

Also today out side 'Rays Outdoors' in dandy plates were non other then ...... STAGEA

was gonna park in front of it but would of left you no room. looks very nice man

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

spotted a white Stagea on heatherton road about an hour ago with custom no plates.. forgot them though >.< thought it was you RBPOWA but wasnt lol

that one definitely could have been me probably dropping off the ball and chain lol

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

you were driving i didnt get a great look at yours but enough to get the plates,i dont have the STAGEA plates but ive seen him once or twice my plates are WGNC34

ahhh damn you, i wanted those plates !

there is a guy on here just by pure luck his plates are standard ones WGN-342 series 2 so it makes sense

pretty sure i spotted simons old rig on canterbury rd/springy rd intersection.

had different wheels on it, but dead certain it was his. did he sell it?

white s2 in ftg, the road where maccas is. seen it a few times, was unfortunately blowing a bit of smoke :D

and a white s1 or s2 on the westgate fwy saturday or sunday...

starting to become common now.

westgate freeway Saturday think it might of been between 5-7pm if so that was me.

FTG ? fountain gate ? im around there alot , gf lives near by, but no smoke from me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...