Jump to content
SAU Community

Recommended Posts

Hey Leewah, I just noticed the avatar. Careful We'll start a trend. Damage caught on video will be the new rice.....

That avatar was made by a friend of mine who didn't have much else to do that day. He made it as a joke but I decided that coz I haven't run a 9 yet, this would be the next best thing to be animated....

  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

Echos are awesome fun, driving down Lygon street I almost got a look from some girls in a 4wd:( I thought for a minute even I could get laid in a car like an Echo, but sadly that didn’t even do it for me:( … so I just thrashed it around Winton instead:thumbsup:

hahah Roy drives an Echo too :rofl:

so what do you *really* drive Vitz? ;)

Seriously, I own a ECHO but my other half drives it.

To tell you the truth, I drive a Honda Jazz. :thankyou:

It's not a Skyline but at least it is 1.5 ltr. VTEC POWER (if I get long enough straight to activate the bloody V-TEC). Doesn't do 0-100 km/h under 5 seconds but does 500 km under 40ltr.

Anyone else! NO? :jump: I thought so.

Cheers,

VITZ :devfu:

After driving the S2000 I helped a friend buy I was impressed by the redline and the power icrease of the vtec but you have to drive it like you stole it to make it all happen.

On the boil though it is a nice handling car. PI is a great place for them with plenty of flowing corners but Sandown would kill them with the 2 slow corners into long straights. I think winton would be a favoured place for the S2000.

40lt to 500km? I think my lynx would do that. The Lexobarge is good for almost 800km per tank (80lt @ 10km/lt)

  • 2 weeks later...

That is the Purple GTR with 'Melbourne Performance Centre' sticker on the side.

There are a few of errors on the times, that 1.17 being one of them.

They have Ben's best time as a 1.17, but his second lap shows 1.16...?

The Porka RS shows a best time of 1.22 for one lap only, but for the rest of the day he was no where near that 1.22...?

They also had Snowy at around 1.26s towards the end of the day, when in fact he was struggling to break the 1.30 mark. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...