Jump to content
SAU Community

Recommended Posts

haha I like the social aspect of it. He got a new car and wanted to try it out on some roads so I offered the Cotter. He's idea, so I wouldn't go unless he was. Bank account frozen (no work) so fuel has to be used wisely :P

Just got news from iron chef that my car is on the way to compliance and should be there this week. They are installing new tires and band extender so I can pick up Aus radio.

Sooo close now

Where is pick up?

We should do a cruise in honour of Daniel and his new riiiiiiiiiide.

  • Like 1

mine took about two weeks get yourself a permit btw. NSW,ACT.I picked up mine from Melbourne so i didnt know i had to get a permit for NSW,VIC and ACT. Driving back got pulled over in NSW and they were meant to give me a $1200 fine but they let me go. Save yourself the hussle and get all permits.

Yeah right now I have paid about $13,500
Iron Chef quoted about $16,500 landed and complied.
So his guess is around $3000

They are fitting the cheapest possible tires for me because I won't be keeping the rims.
Also a radio band extender so I can pickup aus radio stations.

Room. I has none.

I think I'm going to investigate a storage unit for 4 months or so. Not an expense I need right now, but if it's not long term at least I won't be forking out for one indefinitely.

Storage, at least theres a bit of choice these days,

Cant build a shed where you are.

Was thinking the Bond roll bar thats FIA approved and bolt in might go well in the 32.

I can take it out for road use.

1/2 cage is probly the way to go.

Whaddayareckon?

$1015.00 six point roll cage with diagonal.... $670.00 1/2 cage with
diagonal
thanks 02 45879672

-----Original Message-----
To: bondrb@bigpond.net.au
Subject: R32 Skyline

Hi, im wondering if you make the removable roll bar/cage for R32 Skyline.
If so, what are the options and cost.
thanks, Mike.

Speaking of good locations .... here's a trip (with stages) I hope to be doing in the next few months if things go my way .. if they don't go my way I'll stick to going to doing a lap around the ACT, to Civic for a coffee then home :closedeyes:

TheTrip_zps948ac42c.jpg

  • Like 1

Speaking of good locations .... here's a trip (with stages) I hope to be doing in the next few months if things go my way .. if they don't go my way I'll stick to going to doing a lap around the ACT, to Civic for a coffee then home :closedeyes:

TheTrip_zps948ac42c.jpg

What sort of time frame do you expect to do this over?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...