Jump to content
SAU Community

Recommended Posts

247.4rwkw

R33GTST

Z32 AFM

GCG High Flow - R33 exhaust housing (not vg30)

3" Batmbl bellmouth dump --> Catco Cat --> 3.5" Kakimoto with 2 mufflers

S15 injectors 450cc

Tomei Fuel Pump

Turbtech boost valve

18psi - running back to 16psi

Stock Airbox

450x300x76 FMIC (Justjap)

Full boost actually comes on earlier on the street in 4th than the dyno indicates. 1st and 2nd gear not quite.

Tuned at MRC Castle Hill - Mark (Top Bloke and good tuner)

post-11777-1200910069_thumb.jpg

post-11777-1200910755_thumb.jpg

Edited by benl1981
  • 2 weeks later...

R33 gtst Rb25

Z32 afm

splitfire coils

sard fuel reg

tomei metal head gasket

hybrid intercooler

garrett GT3540 turbo with .82 rear

tial 38mm wastegate.

Apexi power fc

Blitz sbc id3 boost controller.

etc etc

Makes 300hp @ 14psi on a safe tune as it needs to get me to work daily.

Just got it back today and quite happy with the result. Will post up dyno chart if i can get it on my computer

Mark at godzilla tuned it. did a good job

R34 GTT RB25DET NEO

everything stock except:

K&N intake

dump-front-metal cat-hipower silent

avcr - 0.7bar(10spi) to be exact

safc2

coilpack+sparkplugs

serviced(oil change+filter)

= 279.9 rwhp = 208.something something rwkw

will post result soon

post-40804-1201921050_thumb.jpg

Edited by lcy

Sorry mate, though you could've edited my first post....

My car spat out 201.7rwkw on 13psi with split dump and screamer, big cat and two mufflers, jjr front mount, power fc and avcr. Turbo lasted 5 weeks so my gt3076r is getting built as we speak, along with 550cc injectors hopefully will get over 250rwkw on around 16psi.

  • 2 weeks later...

hi i have got 260hp/195kw with the following:

dyno dynamics dyno on shootout mode

standard turbo

gtr front mount

dual stage boost controler 13psi

blitz sonic power pod in closed box

modified entry plenum

3'bell mouth dump pipe high flow cat and katimoto cat back

standard computer

standard evrything else

dynochartwithaf080308edit.jpg

MODIFICATIONS AND SPECIFICATIONS

1998 NISSAN SKYLINE R33 GTS2.5T

40TH ANNIVERSARY EDITION.

2.5 litre twin overhead cam straight six standard motor, never openned.

Mechanical Nismo Selective 1.5 L.S.D. diff

Nismo G Max II clutch

Tein coil over height and ride adjustable

Super advan mags (powdercoated black) with 245/255 Yokohama AVS102 tyres

Hicas lock out [individual tie rod ends]

Whiteline adjustable nolethene bushes for camber/castor at all four wheels

HKS triple layer dry pod filter

Z32 Mass Air Flow Meter

SARD fuel pressure regulator

555 Nismo injectors (yellow top colour coded)

Splitfire coils

Blitz 700x600x70 fmic (anodised blue)

HKS IV electronic vacuum controller (boost controller)

Blitz turbo timer

Apexi turbo boost gauge in custom s/s holder

Greddy gauges x3:oil pressure, oil temp, exhaust temp, mounted in a dash pod

Superslide carbon fibre adjustable rear wing

Alloy oil cooler with stainless steel braided lines

Apexi alloy radiator

Cusco high pressure radiator cap

D1 oil catch can

Master cylinder brake brace stop bracket

Project mU front discs [brakes]

Braided stainless steel brake hoses [full kit]

90mm exhaust with HKS Hyper 120mm s/s muffler

Cusco front tower strut bar

Garrett GT3076 WG turbo with 100mm fluted inlet

Custom braided oil and water lines to turbo

HKS 40mm external wastegate [18psi spring rate]

HKS cast low mount manifold extrude honed and flowed

Custom alloy intake pipe

Custom s/s split dump and front pipe

Nismo 500hp fuel pump with 12volt power feed

Tomei adjustable exhaust cam pulley

Tomei Poncams 256 degrees/8.5mm lift

Apexi Power Full Computer with Hand Controller

Alpine MP3 player and 4 x coaxial speakers

300kph Nismo speedo

Carbra

SAAS/Momo leather steering wheel

Razo gearknob

Razo accelerator pedal

Custom holder for hand controller

Custom grills on front bar

Custom s/s front bar braces

Custom rear boot lid spoiler trim

Custom stainless steel heat shield around turbo

Custom EVC mount on steering wheel cover

Odyssey fully sealed gel battery and custom mount

External wastegate, manifold, and turbo exhaust housing high temp coated

Stock Internal RB25DET

HKS 3037 Pro S turbo kit, 56T A/R 0.68

HKS adjustable internal wastegate

HKS Stainless steel split dump pipe

HKS Front pipe

3" decat pipe

HKS Silent High Power stainless steel catback exhaust

HKS 3" alloy intake pipe

Apexi Power FC

Apexi Power FC Boost control kit

Apexi Power Intake Pod filter

Blitz LM Front Mount Intercooler

Nissan Z32 AFM

Nismo fuel pump

Nismo 555cc injectors

R.I.P.S custom washer bottle/oil catch tank with -10 lines

Custom black radiator air deflector

Exedy heavy duty clutch

Splitfire coils

Fuel purge system fully removed

Alloy radiator

NGK BCPR6ES spark plugs

95 octane

270rwkw on 17psi and only using crappy 95octane fuel

Picture016.jpg

Picture017.jpg

  • 2 weeks later...

R33 Series 2 GTST

3" Split front dump, high flow cat, 3 inch zaust.

FMIC

Greddy EBC

Walbro FP

Fairly Hot day, BP Ultimate 98 octance

183.4rwkw @ 11psi

Edited by dnbutts
Guest Joeyz
Hi all

Hi-flow Turbo - GCG

Exhaust cam gear - Adjustable Greedy

Adjustable fuel pressure regulater - Turbosmart

500hp intank fuell pump - Walbro

Z32 AFM

NGK Irridum spark plugs

Shell V-Power Racing Fuel

3" Exhaust

FMIC - Greedy

244.9rwkw

Update

Tomei Pon Cams

Sard 700cc Injectors

Now Getting 270rwkw on 1.2bar/18psi

RB25

GT30/40

splitfire coils

45mm ITS gate

GReddy intake

80mm TB

550cc Inj

EMS Stinger

blah blah blah

made 270rwkw @ 18psi on ovaboost dyno (through a built auto), so its very reliable accurate power =D

Insane to drive, over 150kg of stereo gear in boot and have no traction in 1st + 2nd

Short list of mods:

RB25det spec 2

GT3582R .82ar

Jun style intake

90mm throttle body

550cc Delphi top feed low impedance injectors

JGY fuel rail

Aeromotive FPR

Walbro 255hp fuel pump

Tial 44mm v band waste gate

Hallman boost controller

3" ss turbo back exhaust

Top mount exhaust manifold

Apexi Safc 2

Apexi ITC

93 pump gas

Spec stage 3 clutch

Synchronic BOV

FMIC

Z32 MAF blow threw

This is a 2698lb with driver in it 240sx.

We had some problems with the boost creep so we could only set it at 11 psi but as you can see it creped up to 13.5 or so at about 6100 rpms. Also had some problems with my coil packs.

This is wheel horse power not in shoot out mode.

Correction factors were

77deg. F

60% humidity

60" of mercury

Intake temp was 90deg F

Car pulls like mad all the way to red line. I am very happy with the car as is but I'll more then likely pull the exhaust manifold off and fix the creep problem.

post-42695-1206654216_thumb.jpg

post-42695-1206654236_thumb.jpg

Edited by JonTurpening

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...