Jump to content
SAU Community

Recommended Posts

called him to discuss ways about getting it repaired. as soon as he mentioned warranty was void because of the heat wrap thats when i decided to go a different route. but anyway this isnt a thread about bitching i'm looking into what other manifolds are out on the market or even if i can make my own.

  • 9 months later...
its in dyno thread u lazy git haha

stock rb20

walrbo pump

gtr injectors

china cooler and piping

k&n filter

hypergear atr43g3 0.63 rear internal gate standard position

full zaust

nistune

260 @ what psi?

its in dyno thread u lazy git haha

stock rb20

walrbo pump

gtr injectors

china cooler and piping

k&n filter

hypergear atr43g3 0.63 rear internal gate standard position

full zaust

nistune

Cool, proves you can get a good result with the right parts, not just the name brand parts. Some of the Hypergear turbos are doing a good job on the little CAs and RB20s :)

mmm... Hub is not RWKW when they are no wheels involved. :/

very true, my bad... went on a roller dyno as well but wheel spun and also result seems to be fiddled a little by rival workshop haha

on a side note, first time I have had one of my cars on a hub dyno... while they may read power a little differently, my god it was good not having the head f**k of wheel spin, tyre heat and pressure etc.

so consistant, ran 350hp and then backed up with 351... could not see the difference between the lines

Edited by Cerbera

Mine never gets tied down :)

Ye I've seen some rollers @ times with poorly tied cars and there is just rubber everywhere.

Really makes a mess of the tyres.

You aren't running semi's or something? They = bad for dyno'in.

Mine never gets tied down :)

Ye I've seen some rollers @ times with poorly tied cars and there is just rubber everywhere.

Really makes a mess of the tyres.

You aren't running semi's or something? They = bad for dyno'in.

Nah they are just really shitty rock hard old 245/17's that came with the R33 GTR rims... I mean rock hard as in you do a skid and they don't even smoke haha

The plan was to get tuned on hub dyno, then do a burnout and replace tyres. But we had a chance to put it on a roller and it didn't really work :D

  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...