Stripping R32 Type-M

[C_DawG]

have u got the lower dash surround (the black plastic thing with all of the pop out bits for switches etc)???

Thanks,

Michael

Nah the only lower dash item I have at all is the glove box lid.

[C_DawG]

Roy let me know what you need, I can leave it in Melbourne for you to pick up if you like, otherwise your welcome to come have a scavange

Sorry guys most of the interior is no good, seems I left some of the floor mats at a mates.

Only really usable peice is the dash top, and the glove box lid although it is quite scratched.

[yogi000]

hey mate,

i'm after the the plastic bits that cover under the motor/radiator and part of the drivers side wheel arch that comes all the way to the front bar.

Do u have these peices?

George

[C_DawG]

hey mate,

i'm after the the plastic bits that cover under the motor/radiator and part of the drivers side wheel arch that comes all the way to the front bar.

Do u have these peices?

George

Yes I beleive I do, however they are in Melbourne still, Im going down on Monday to retreive all the parts that didnt get grabbed when I towed the car.

[gogobutton]

have you got a pair of front disc if so how much?

[R32gts-t]

hey do you still have the handbrake cable and rear discs if so how much meat is left on the discs and pm me a price if you could.

thanks

Greg.

[CerealKiller]

hey mate what condition is the suspension in (shocks / springs)?

Also do you have the jack / wheel removal kit?

[Sheriff Wan]

Hey mate if you have the centre A/C Vent i will take it now.

Let me know when you can.

Cheers,

[C_DawG]

have you got a pair of front disc if so how much?

Selling them with the front calipers etc, Im pretty sure they are getting picked up this weekend.

Im hanging onto the handbrake cable and rear discs to use in the Cef. No centre vent sorry mate

Cereal, They shocks and springs etc look to be in good nick, but they do look original, making them 12 years old. Not sure I would trust them to be installed in another car. No jack or wheel removal bits sorry.

[CerealKiller]

hmmm...one other thing do you have the driver's side a pillar trim?

[C_DawG]

hmmm...one other thing do you have the driver's side a pillar trim?

Nah mate, most interior stuff was gone.

[wises]

dude stock supension, due you still have them?? i really could use it

[lukew105]

Any side skirts?

[nghiagero]

im looking for the left door trim, pannel, my 32 thats coming in has shotty ones held in by double sided tape lol

[xRHETTx]

GT badges? To replace mine that were stolen...

[luckydip]

Do you have the induction pipe that goes into the cast alloy pipe that feeds into throttle body. It is black steel - about 45 cm - next to p'steer fluid canister - 60mm dia?

Email me on

[email protected]

Thanks

[froggy]

hey u got the centre air vent closest to the driver>??? and do u know if it would fit on a r32 4 door>?

[scotty090]

Hey mate, im after the front ash tray if you have it?

If you do can you give me a price?

[ali-turko]

do u hav headlight blinkers?? n da ecu?? plz reply to [email protected]

[ali-turko]

u still got ur headlight blinkers??? [email protected]