Jump to content
SAU Community

Recommended Posts

I used mine for about a year, probably clock about 18k and towards the last 4 months, it was just shit house, no grip on the wet at all and would spin 2nd in the dry

So if you are giving it all, it breaks traction, and it got a 9/10 ?

As someone said right back on the first page, a 9 or 10 out of 10 would be performance from a race slick. It's hard to give grip ratings when you have only ever driven on cheaper tyres and never had a road semi on.

I used mine for about a year, probably clock about 18k and towards the last 4 months, it was just shit house, no grip on the wet at all and would spin 2nd in the dry

So if you are giving it all, it breaks traction, and it got a 9/10 ?

Yes , WOT in the wet and it breaks traction. Not really an indicator of a bad tyre.....

^ they're great tyres, but those ratings are a tad optimistic :yes:

I would realistically put them something like:

W: 7/10

D: 6.5/10

To give you an idea of my scaling, Nankang NS-II would be

W: 4/10

D: 4/10

Trying something new!

Achilles ATR Sport 2

putting them on Thursday. Hope they're decent enough for that price. 235/40/18 = 130 .. 255/35/18 = 175 (supplied, fitted and balanced by JaxQuickFitTyres)

I'll update this after I run them in :)

What are your thoughts on the ATR2 mate? The seem to hold up better on higher powered cars for drifting than the ATR Sport.

Yeap spot on! That's what i would rate them as well, if they are 9/10, i'm not sure how you would rate RE11s or AD08s when they grip on WOT on 2nd in the wet, 15/10?

what power are you talking about with these ratings? hard to believe a tyre holding traction on a gt30 with big boost.. i mean with 200kw traction isnt an issue in second , with 300kw they get fried..

Edited by AngryRBGTX

Car: 1998 R34 GTT sedan (RWD)

Suspension: BC Racing BR coilovers F:6kg/R:5kg, bigger swaybars

Ride height: Lowered but not silly

Power: ~200rwkw

Wheels: Stock R34 GTT 17x7.5

Tyre sizes I am looking for: Stockish 235/45R17, or maybe 245/40R17 at a push. I want same size fronts & rears for easier rotating.

I am looking for quality tyres for street use only. Looking for excellent dry grip and very good wet grip. Reduced tyre noise a bonus but not a must. Happy with a slightly softer compound and 15-20k life. Still I don't want a (semi) semi slick because wet grip is important.

The best tyres I ever had were Yokohama Advan Sport V103S, which I would rate at 9/10 for both dry and wet.

Is there anything similar, from any manufacturer, in the ~$300 per corner price range? What would you recommend?

Thanks guys.

^+1127634

These tyres are a fantastic tyre, even holds up to trackwork ;)

done about 10k kms on my super sports, including 2 trackdays, with 50+% tread remaining on a 350kw 33GTR

so i would highly recommend these tyres to anyone!!

What are your thoughts on the ATR2 mate? The seem to hold up better on higher powered cars for drifting than the ATR Sport.

Unfortunately, still haven't got them put on! Jax had a delay and then I went to Tasmania. Going to get it done end of this week hopefully (including installing my coilovers/camber arms)

^+1127634

These tyres are a fantastic tyre, even holds up to trackwork ;)

done about 10k kms on my super sports, including 2 trackdays, with 50+% tread remaining on a 350kw 33GTR

so i would highly recommend these tyres to anyone!!

Thanks guys! So about these Michelin Super Sports, it looks that over at http://www.michelin.com.au/ the sizing only starts at 225/45R18 (for $505/ea :w00t: ) so no 17's unfortunately. I'm not sure if I'm game enough to order from TireRack...

OzzyTyres has the following on sale in 235/45R17:

  • $154/ea GOODYEAR 94Y EAGLE F1
  • $155/ea DUNLOP 94W DZ101
  • $159/ea MICHELIN 94Y PILOT ALPIN PA3
  • $159/ea MICHELIN 94Y PILOT PRIMACY
  • $201/ea PIRELLI 94Y PZERO ROSSO ASSYMETRICAL
  • $238/ea PIRELLI 97Y PZERO

Are any of these close to the Super Sports in performance?

I used Tirerack to get my Michelins due to the fact Michelin Australia cant be bothered bringing 265/35/18 into Australia

Once i sent my money i received my tyres in 5business days too my door!!!

Michelin Australia arnt bringing every size into the country, this is reflected on their website

the michelin PSS are probably the best wet/dry tyre on the planet atm, so if you go the 235 45 17 from tirerack then figure $400 freight and money transfer + $800 for the rubber, then $100 to strip fit and balance...$1300 so that's $100 over your budget,

is $1300 worth it for the best?

up to you

...edit

maths

Edited by Missileman

I used mine for about a year, probably clock about 18k and towards the last 4 months, it was just shit house, no grip on the wet at all and would spin 2nd in the dry

Mine were grippy right up to when they were replaced. 255/35/18 all round.

Opinions on grip, is just that, opinions. One person with one set of wheel alignment specs will have a different opinion of the same tyre compared to someone else with different set of specs.

Even tyre pressures makes a difference, and different tyres respond differently to pressures.

I used Tirerack to get my Michelins due to the fact Michelin Australia cant be bothered bringing 265/35/18 into Australia

Once i sent my money i received my tyres in 5business days too my door!!!

Michelin Australia arnt bringing every size into the country, this is reflected on their website

the michelin PSS are probably the best wet/dry tyre on the planet atm, so if you go the 235 45 17 from tirerack then figure $400 freight and money transfer + $800 for the rubber, then $100 to strip fit and balance...$1300 so that's $100 over your budget,

is $1300 worth it for the best? up to you

After much pondering I ended up getting a set of Goodyear Eagle F1 Asymmetric 2 from IT-T in Sydney, just over $800 delivered.

People on Tyrereviews seem to regard these highly: http://www.tyrerevie...symmetric-2.htm

I'll post some experiences once they're on.

Cheers

  • 2 weeks later...

Unfortunately, still haven't got them put on! Jax had a delay and then I went to Tasmania. Going to get it done end of this week hopefully (including installing my coilovers/camber arms)

Alright, finally got these tyres on!

Achilles ATR Sport 2.

D: 8

W: haven't tried (keen to see this outcome)

These are imo a LOT better than the KU31's I had. took the 33 for a hit yesterday arvo around round abouts and corners etc and it kept me planted to the ground :D Can't be happier considering the price of them!!

235/40/18 fronts

265/35/18 rears

If they are anything like my achilles atr sports, give them 10,000km and they will start to turn to rubbish. I still have shit loads of tread but they just dont want to play the game anymore.

Federal RSR's for me in a 2 weeks :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...