Jump to content
SAU Community

Recommended Posts

On 27/02/2023 at 3:38 PM, 93soup said:

Recently bought a 33gtst s2 and looking for some wheels. I found a set of 18x9.5 et35 just wondering who else has run this spec and any clearance issues or mods needed?

If you searched this thread you would have found that out.

  • 3 months later...

Skyline model = R32 Skyline GTS-T 4-Door

Wheel diameter = 18

Wheel width = 9.5

Wheel offset = +38

Tyre size = 245/35 (This is a must...)

Modifications to fit = None, but it would be recommended to get some wheel spacers, I am thinking of running 2.5 in the fronts just to push them away from the suspension just a tad as it's a bit close for my tastes.
Stock suspension, fenders have not been touched what so ever.

PXL_20230628_010409656.jpg

  • 6 months later...
On 1/14/2024 at 1:25 AM, Adz2332 said:

Has anyone had the A disk on a r32 gtst with R33 gtst brakes on it?

Screenshot_20240113-225419.png

I have A disk meisters with r32 gtr brakes on the front, clears the calipers no worries.

O disk rear.

Edited by WMDC35
42 minutes ago, Adz2332 said:

What offsets? Any pics mate?

 

18x9 +22, 18x9.5 +24, they're on a c35, a mate had the same size on a 32 gtst, but needed more camber and guard work than the laurel, pic maybe not relevant haha

 

Edited by WMDC35
  • 3 weeks later...

general rule of thumb:
If you want stock-ish fitment,

8 to 8.5 +35 front
9. to 9.5 +38 rear
These are Nismo sizes for RWD Nissans.

From that baseline, you grab a tape measure an figure our where your new set of wheels will fit.

@Adz2332 please specify what car you have, what body panels, and what modifications you will be running.

 

GT-R owners like me have it easy, but RWD owners, have a bit more calculations to run.

 

You can obviously run "GT-R" sizes, which would be 9"+30. But that heavily depends on your preference.

This rant is completely ignoring any StanceNations specs/looks.

1 hour ago, niZmO_Man said:

general rule of thumb:
If you want stock-ish fitment,

8 to 8.5 +35 front
9. to 9.5 +38 rear
These are Nismo sizes for RWD Nissans.

From that baseline, you grab a tape measure an figure our where your new set of wheels will fit.

@Adz2332 please specify what car you have, what body panels, and what modifications you will be running.

 

GT-R owners like me have it easy, but RWD owners, have a bit more calculations to run.

 

You can obviously run "GT-R" sizes, which would be 9"+30. But that heavily depends on your preference.

This rant is completely ignoring any StanceNations specs/looks.

Thanks mate.

32 gtst. Stock panels but don't mind pulling them ever so slightly as it hasn't gone to paint yet. Stock arms etc with coils.

I was hoping I could get any of the specs below to fit the front to 

Screenshot_20240203-014808~2.png

  • 4 months later...

Hey guys any recommendations for fitment for a stock 94 GTR R32 

Want to order work meister s1 3p and would like a nice looking flush fitment. Plan to get MCA coilovers to set ride height etc. Just confused on offset, brake clearance etc. 

Never purchased after market wheels so I'm a bit concerned since it's a long wait to order and I don't want to order the wrong specs. 

On 30/06/2024 at 11:50 PM, Akira32 said:

Hey guys any recommendations for fitment for a stock 94 GTR R32 

Want to order work meister s1 3p and would like a nice looking flush fitment. Plan to get MCA coilovers to set ride height etc. Just confused on offset, brake clearance etc. 

Never purchased after market wheels so I'm a bit concerned since it's a long wait to order and I don't want to order the wrong specs. 

The other thing to watch in the meisters is they have different faces to cater for different brake sizes. eg. i run an 'R' disc on the front (biggest clearance for brakes) and the 'O' disc on the rear. it doesnt impact size or offset, its just the shape of the rim face that changes.

  • 2 weeks later...
On 7/4/2024 at 7:23 AM, R3N3 said:

The other thing to watch in the meisters is they have different faces to cater for different brake sizes. eg. i run an 'R' disc on the front (biggest clearance for brakes) and the 'O' disc on the rear. it doesnt impact size or offset, its just the shape of the rim face that changes.

Yep I did some more research and found this out also. Still hesitant on ordering until I find the right fitment for a stock GTR r32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...