Jump to content
SAU Community

Recommended Posts

Don't worry about my questions. My bushes are adjustable for camber so i wont need to replace them again. :D

I should be ordering a few things in the next couple of days.

Don't worry about my questions. My bushes are adjustable for camber so i wont need to replace them again.  :unsure:

I should be ordering a few things in the next couple of days.

No problems, ready when you are.

:) cheers :)

No problems, ready when you are.

:D cheers :O

I was actually ready last week and PM'd you about putting in an order, but i guess you didn't get the PM. It looks like im going to end up spending a bit of money this week so i might wait another week or 2 before ordering.

How many sets of shocks are left? Can i put a deposit on a set of shocks?

I was actually ready last week and PM'd you about putting in an order, but i guess you didn't get the PM. It looks like im going to end up spending a bit of money this week so i might wait another week or 2 before ordering.

How many sets of shocks are left? Can i put a deposit on a set of shocks?

Hi, the PM system has been playing up a bit, plus my mailbox was full once last week for a few hours until I cleared some space. I get 30+ PM's as day and I answer every one, so my mailbox fills up pretty quickly.

There are a handfull of sets of R323GTST shocks in stock at Bilstein, so no real panic. If you want to secure a set it is $400 deposit, quite a few guys have done this and then finalisd when they have the budget. PM me for details.

;) cheers :)

Gary, did you get my pm?

I have reponded to all PM that I have received. If you haven't received a reply please PM me again.

:) cheers :D

Hey mate, me again....

Do you have the parts numbers for a set (4) of springs, shocks, bummp stops etc... the stuff i need to get to have a new sprink shock setup....

Also so it will be around 1437 u sed....if so am i able to make a deposit on this and then pay the rest when i get my finances all together....and how long can u leave this deposit down for just in case?!

Cheers DAvid

i would like a price for front and rear set for r32gtst please!
Hey mate, me again....

Do you have the parts numbers for a set (4) of springs, shocks, bummp stops etc... the stuff i need to get to have a new sprink shock setup....

Also so it will be around 1437 u sed....if so am i able to make a deposit on this and then pay the rest when i get my finances all together....and how long can u leave this deposit down for just in case?!

Cheers DAvid

PM's sent

:D cheers :laugh:

Edited by Sydneykid

Hey Sydneykid,

Just had all the suspension gear installed today, and I'm stoked with the result. The ride height is spot on (I used the standard Bilstien circlip setting), now I just have to hope I don't scrape my exhaust of a speedbump or the like...

Thanks again, Ryno

post-3204-1141935137.jpg

Hey Sydneykid,

Just had all the suspension gear installed today, and I'm stoked with the result. The ride height is spot on (I used the standard Bilstien circlip setting), now I just have to hope I don't scrape my exhaust of a speedbump or the like...

Thanks again, Ryno

Hi Ryno,

what is your height from the centre wheel to guard front and rear?

It's about 335mm (though my left front is 342mm for some strange reason).

Mine is on the lower setting of the 2 stock looking ones and its about 330 but my front left is at about 320 for some strange reason. Weird.

Will try to have a look at it this weekend,

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...