Jump to content
SAU Community

Latest Gtr? *warning Spoiler Picture*


Recommended Posts

Found this on the net :

NISSAN AT THE TOKYO MOTOR SHOW 2005 – GT-R PROTO

At a glance:

Ultimate driving pleasure

Exterior design close to final

Official launch set for 2007

At the 35th Tokyo Motor Show in 2001, Nissan unveiled the GT-R Concept, confirming that the GT-R legend would be continued into the 21st century. Then, at the 37th Tokyo Motor Show in 2003, Nissan announced the next-generation GT-R would be rolled out in 2007. Now with the launch of the production model just two years away, the development of the new GT-R has moved ahead again with the reveal of the GT-R PROTO.

Ultimate driving pleasure

In essence, driving pleasure means that a car responds faithfully to the driver's wishes and performs precisely as expected. Successive generations of the GT-R have consistently pursued this vision of ultimate driving pleasure. Whether on the road or the racetrack, the GT-R has always represented ultimate performance combined with handling qualities that stay faithful to the driver’s wishes, in all conditions. As a result, the GT-R has built a reputation that extends far beyond just its loyal owner base.

Exterior design: pure performance

The design of the GT-R PROTO expresses pure GT-R heritage, coming from the first model PGC10 (1969) through R34 (1999), in a new and expressive form.

From its original roots as a pure-bred Japanese performance car, the new GT-R will now be a car sold globally, recognising its ability to compete with the very best in the world. For the first time in its history, the new GT-R will be designed as a specific body-style, and not derived from a sedan.

The design language of the GT-R PROTO is expressed by a distinctive body-style that communicates pure performance and functionality. The form of the GT-R PROTO instantly expresses its purpose and potential, but in a way that is unique to this iconic car.

At the front end, the single centre air intake is designed to optimise airflow and to strongly link the identity of the GT-R from R34 to GT-R Concept (2001). Front fenders are uniquely designed through intensive analysis of the airflow around the tyres and the air vent behind the front fender also optimises aerodynamics. The sides of the body are sculptured towards the rear fender, expressing the power and dynamic tension of the car.

The overall shape of the body combines solid and smooth surfaces to achieve the look of a well-trained athlete. The unique C-pillar crease is designed for optimum aerodynamics, reflecting the racing DNA of the GT-R.

The rear of the GT-R PROTO is strong and well defined. The signature four ring-shaped tail lamps provide an immediate visual link to previous GT-R models. Four large-bore exhaust pipes complete the purposeful look, which could only be that of a pure GT-R.

The GT-R PROTO provides for the first time a clear indication of the final design direction for the production model to be launched in 2007, the first all-new GT-R in eight years.

e9cao0.jpg

Since the first picture disappeared, here's another one :

Nissan%20GTR%20Proto%20Concept.jpg

I don't think the new GTR will look like that, it'll be a little more boxy.

PS. MY350z deleted my thread!

EDITED : I found another picture!

Nissan%20GTR%20Proto%20Concept%202.jpg

Edited by Informer
Link to comment
https://www.sau.com.au/forums/topic/90043-latest-gtr-warning-spoiler-picture/
Share on other sites

Guys just wait for the TMS... what a letdown that schetch is.... and the accompanying text.

Hi Rezz,

Dino is taking pics of the new GT-R at TMS and a photo shoot afterwards. can't wait to see them.

Cheers

Edited by gtrtech

I call hoax by a metrosexual euro-trash loving yuppie designer who decided to improve on the 2001 release prototype, unless someone can provide conclusive proof that this is an official Nissan press release.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...