Jump to content
SAU Community

Recommended Posts

anyone know if boost in lton does nistunes yet?

i've heard that brad likes to push the use of microtech and i've been told by some guys in the know that there are much better options

i find that if you do mods yourself you know when stuff isn't quite right and you can usually pinpoint it more easily

hmmm, might have to pay him a visit then......

i thought gt garage in hobart were the main nistuners in tas and a few ppl from lton go down there for nistuning

people go every where over tas to get stuff done because of one reason or another.

all you have to do is ask. ive been dealing with brad for years now and i didnt even know he dealt with nistune untill a few months ago. i guess you never know unless you ask.

brad has had a lot of experiance tuning all kinds of ecus. he profers Haltechs much like fueltech like vipecs. every place has there profered.

at then end of the day the ecu is there to adjust parameters of the engine and how effiently it does this is all that matters. Ecus like wolf and microtech have half as many load points to adjust these that is why they are not viewed to be as good. plenty of people still use them thoe.

people go every where over tas to get stuff done because of one reason or another.

all you have to do is ask. ive been dealing with brad for years now and i didnt even know he dealt with nistune untill a few months ago. i guess you never know unless you ask.

brad has had a lot of experiance tuning all kinds of ecus. he profers Haltechs much like fueltech like vipecs. every place has there profered.

at then end of the day the ecu is there to adjust parameters of the engine and how effiently it does this is all that matters. Ecus like wolf and microtech have half as many load points to adjust these that is why they are not viewed to be as good. plenty of people still use them thoe.

might go talk to him if i decide to srop some money on the stagea

when would i be able to try out those d1r's?

might go talk to him if i decide to srop some money on the stagea

when would i be able to try out those d1r's?

when ever you like. just send me a pm and arange a time. they are on my race car and only 5 mins to pull off.

ive also found boost to be cheaper than GT for general tunes and nistunes.

Huge thanks to Damo yet again. Managed to get my speedo working and repair a snapped wire on one of my knock sensors.

Possibly was dodgy connection prior to me snapping wire as I now a full power with no pops/bangs/misfires whatsoever and I now have a working speedo :rofl:

Now touch wood nothing will go wrong so I make the track day in August.

so after talking to the original owner of my 33 im even more interetsed to see what sort of power it has now, turns out that before the engine was rebuilt with 26 goodies it made 207.3rwkw on 12psi & 228rwkw on 15psi

Edited by Autumn33

pulled off the rear bar of the 33 today to see how bad the damage is ( was done by the previous ownerspank.gif )

so the 33 currently looks like this sad.gif ( the skyline center garnish is just sitting there so it looks more in on one side)

post-71390-0-45709700-1308040700_thumb.jpg

Edited by Autumn33

little update been talking about ecus a bit lookn at a haltec platnum or the link thats a direct plug in with the r34 true they where going to look into it for me depends on $$ for wat i get in the end ...

on a diff note got my rocker covers back thanx to L'ton powder coating shit pics (Fn ipod cam) but will look grate on ,get my plenum and pipes back 2mora

ill add pics as i get them IMG_0152.jpg?t=1308124405(space blue) to go with my other parts :thumbsup:

how much was that if you don't mind me asking?

also, i'd go see brad at boost for a nistune

pretty sure they will support up to about 500hp (don't know exactly) but it will support bigger injectors, bigger afm, and lots of stuff (plus they keep being able to unlock more and more features with every new firmware update)

how much was that if you don't mind me asking?

also, i'd go see brad at boost for a nistune

pretty sure they will support up to about 500hp (don't know exactly) but it will support bigger injectors, bigger afm, and lots of stuff (plus they keep being able to unlock more and more features with every new firmware update)

Send Veeto a PM, he just put a Nistune in his Stagea, pretty cheaply too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...