Jump to content
SAU Community

Recommended Posts

for reference

17x9 +37 had about 3mm of clearance to stock struts

so i'd say you'd want a 15mm spacer on the rear (about 13mm more inset than the 17x9), maybe 20mm, but then you'll probably be poking out the guards

and as said before, you need the same tyres all round

so stretch 245's onto the 11's or run 265's on the 9's (latter is probably better)

Edited by pipster11

the different rotational speeds

ecu sees rears going faster/slower than the fronts and tries to help you out

Then its welcome to surge city!

Mine was doing when one of my rears was slightly more worn than the other

It's rolling diameter !!! Tyer wear would not be enough to trip it, currently I run staggered sets on all my stagea's but as long as you run close enough to the same rolling diameter you'll have no probs

Example 1 19x8.5 and 19x9 running 235 40 18s all round

Example 2 18x8 with 225 40 and 18x9 235 40

Example 3 18 x9.5 with 235 40 and 18x10 265 35

Plus I've had other sets on the car that have all worked out with no surging . Like I said just get close as with in rolling diameter and you will be right

To be honest i think its fine as long as the rears are bigger than the fronts

100% my atessa gauge was creeping up when on the highway (nearing 10 on the gauge)

I changed 1 tyre and its fine now

Also the car was surging at 100km/h

  • Like 1

To be honest i think its fine as long as the rears are bigger than the fronts

100% my atessa gauge was creeping up when on the highway (nearing 10 on the gauge)

I changed 1 tyre and its fine now

Also the car was surging at 100km/h

I found this - had 2 tyres replaced on the front for RWC and got some serious surging issues - chucked them on the back and its aok

tyres dont need to be the same just the rolliang diameter does :)

Ok so using the pirfect wheel specs for an Rs4S

18X9.5 +12 all round

what tire profile do you recomend?

i will most probably roll the guard lips for comfort, i just want it to tuck in nicely, obviously beinf 4wd the front and rears need to be the same.

might get a mate to fit a 235 on on, see what the stretch is like, still unsure of brand so it will depend.

coilovers arrived otday so gonna drop it and see what sort of cavity im looking at

ok i seem to be getting idfferent information from different wheel calculator sites, can some one help me out with some dimensions.

CII Rs4-S c34

it currently has R34gtt wheels fitted which i beleive are

17X7+40

as they are from a RWD R34 they sit quite far in the guards.

just fitted my BC coilovers and when going over bbumps when the wheel cambers in the rim touches the coilover thread.

static it is a few MM off.

its the rears which are touching on bumps, the fronts are fine.

i am going to use maby an 8-10mm spacer to solve the issue but the new wheels are on they way and im confused as to weather they will foul aswell.

they will be

18X9.5 +12

one site sais i will loose inner clearance and another sais it will gain so im not sure.

Edited by GH05T

The wheels should be stamped with their size somewhere inside them, they usually are. I'm guessing they're +30, not +40 offset. An offset of +40 is usually for FWD cars.

Are you using an online tyre calculator? There are plenty around if you do a Google search.

well they are R34 GTT stock wheels which from searching on SAU seem ot be +40

i am using online tire calculators which is where im getting the conflicting information from.

does anyone know of one which they would trust?

Edited by GH05T

To be honest i think its fine as long as the rears are bigger than the fronts

100% my atessa gauge was creeping up when on the highway (nearing 10 on the gauge)

I changed 1 tyre and its fine now

Also the car was surging at 100km/h

had the exact same problem, but both my rears where bold and my front where 95%, and started surging aroudn the 90km/h mark, and the gauge had about 10% i removed the plug under the dash that brought the 4wd light on and limpt home (130km's)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...