Jump to content
SAU Community

Recommended Posts

im going 235/40 tires, i really didnt want to go spacers, i really didnt.

hoping i take some caber away and run about -1deg and it wont touch under load.

under load now it gains f**king heaps of camber with the stock arms

im so confused, noone with an RS4S with 18X9.5 +12 has had this little clearance. why mine?

i.e.

the issue is that you are looking at an example of a car with stock pogo sticks.

therefore in that example:

- the height is standard, meaning next to no negative camber = more clearance

- standard struts are skinnier than the threaded versions of height adjustable coilovers = more clearance

pete used to run 18x9.5+12 on his rs4-s but had 5mm spacers behind them to reduce the amount of time the inner lip spent hobnobbing the struts

Be interesting to see where they sit on the rears on the out side all spaced out. I will be fun fitting my 10+15 on was hoping to tun a with 10mm spacer .i don't mind running camber so hopefully squeez them in ;)

should be able to tuck them, ill post the clearance with the camber arms and tires so i can load them up properly.

this is what my other wheel did scraping the strut

IMAG2108_zps688f7302.jpg

9.5 does have some width to it though :D

IMAG2117_zpsd5bf6931.jpg

Be interesting to see where they sit on the rears on the out side all spaced out. I will be fun fitting my 10+15 on was hoping to tun a with 10mm spacer .i don't mind running camber so hopefully squeez them in ;)

you should be apples, Jase.

my old setup was very similar with the narrower cradle (I was running 18x9.5+0 with a 235/40 and -0.5 degree camber). you won't be wanting any camber with the numbers you'll be trying to feed through the tyres haha

100_1413plateless.jpg

100_1393.jpg

  • 1 month later...
  • 2 months later...

RS-Four autos (whether s1 or s2, it doesn't matter) have a wider rear subframe than factory manuals, so it'd be a tight fit without a fair bit of camber. I've had 18x9.5 +15s on mine as a trial fitment and the rears stuck out around 15mm.

  • 1 month later...

Looking at some 19x8.5 +28 fronts and some 19x9.5 +42. Will these fit? And what tyre recommendations do people have. Not fussed if I have to run a spacer just need to know what size?? Going on a rs4s

Edited by Steve.b

Looking at some 19x8.5 +28 fronts and some 19x9.5 +42. Will these fit? And what tyre recommendations do people have. Not fussed if I have to run a spacer just need to know what size?? Going on a rs4s

=42 will require 25mm spacers at least to clear your suspension. Personally I was very happy with my 17 x 9 on my lowered suspension - meant I could have some decent tyres (255 40). I have gone to 18s to try to get a little taller gearing but if you run 19s you will have very thin (30 aspect) tyres which are not very street friendly.

Pic shows 17 x 9s (subsequently lowered the front one more circlip groove

Second pic shows a set of Nissan 18s (which I reckon are plenty big enough)I trialled before I got my current CE28Ns:

002-4.jpg[/url]

2014-02-02181000_zpsf6f87731.jpg

These wheels were to nice to let up. So I need to figure out what I need to fit them. Happy with a bit of stretch look. And I don't mind buying hubcentric spacers. Just need advice on what size spacers and what size tires to keep the rolling diameter close? Help appreciated.

If you have bought these wheels you are going to have to do some work because I doubt anyone has the same combination of diameter, widths and offset to be able to tell you exactly what you need.

What I can tell you is that getting the same rolling diameter front and rear (I assume you have the Atessa awd) is the hard part - never mind your speedo - that's not that important.

In order to achieve that you will need staggered fitment e.g.

Nitto Invo (which I am using as an example as I have just put some on my car) front 225 35 19 rear 265 30 19. With the spacers needed to clear your suspension the rears at least will not fit in your guards so you will have to undertake some serious modification.

Just read through all pages of this thread over two days.. a lot of the same info.. im after the same set of wheels as someone else has posted on here.. rota grids 19x9.5 +20 (http://pages.ebay.com/link/?nav=item.view&id=130578005418&alt=web) with 235/35 tires. For a 2000rs4s According to this: http://www.willtheyfit.com/index.php?width=215&aspect=50&diameter=17&wheelwidth=7&offset=30&width2=235&aspect2=35&diameter2=19&wheelwidth2=9.5&offset2=20#content

They are 22mm closer to the strut and 42mm more poke than the stock rs4s 17s with the same rolling radius. I dont mind using a small spacer on the rear but would like to keep the front spacer free at least. Preferably want the front and back flush to the guards.. maybe a little poke. Does this seem like a fairly safe bet? Im reading it will just want to be as sure as I can. No suspension mods yet but will be getting bc br coilovers at some point. Seems like (with most things) itll work with some and not others and is more of a trial and error type thing.. Maybe someone in the marion area in adelaide will let me trial fit their wheels? (Pm me if you can). Cheers guys

Edited by c34Florry

Post a car you would like it to looks like. Offset is turning into one of those subjective things. People with scribbley tats and ear vaginas think scraping the road with their subframe and pulling their arches out is mad cool.

While the others with a wife, three kids and a mortgage, living the dream.... might want some more practicality, but still have a decent looking car.

Realistically.

Somewhere between +18 to +30, depending on how much tyre you want to put on them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...