Jump to content
SAU Community

Recommended Posts

I am having big blow by problems on the track also. None through the dipstick, just through the breathers. I fill the ARC catch can in 4 laps. :wub:

My oil pump is stock...I think??? I never replaced it. So I am a bit weiry to add an extra 1 lt of oil.

Will the trust sump extension kit with baffle and pick up reduce my blow by?

Has anyone used the Mines Rocket Cover Baffle Kit?

I need help I hate having this problem at the track, it gets VERY messy :laugh:

Anyone?? :(

all feedback appreciated

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

Will the trust sump extension kit with baffle and pick up reduce my blow by?

NO.

I have seen this happen to a few cars now. Mostly it is related to having too much oil in the head of the motor & it overwhelming your catch can. Sometimes it is dependent on whether a circuit is clockwise or anticlockwise - people can have problems if their catch can is on the passenger side & the circuit is anticlockwise.

Have you plumbed the can back into the sump?

Will the trust sump extension kit with baffle and pick up reduce my blow by?

NO.

I have seen this happen to a few cars now. Mostly it is related to having too much oil in the head of the motor & it overwhelming your catch can. Sometimes it is dependent on whether a circuit is clockwise or anticlockwise - people can have problems if their catch can is on the passenger side & the circuit is anticlockwise.

Have you plumbed the can back into the sump?

No, The catch can is the ARC one which sits on the front drivers side. It gets the blow by vis one braided hose coming from the rocker cover. I'm thinking the mines cam cover tripple baffle plate will help reduce the blow by????

Any thoughts....anyone?

I've thought about the possibility or re-directing the oil back into the engine (sump return)... would stop the sump from running dry.

I read somewhere the fables gibson gtr's did this. Of course, this means that fuel gets into the oil (right?), and regular oil changes will be needed...

I don't know if its a good idea for a street car, but on the track, you could do it (put a tap into it).

blow by is mostly caused because the piston rings arn't a perfect seal (and when they do, the engine siezes), right? So less boost (less cylinder pressure) would help.

baffle plates help prevent oil starvation (air near the pickup), so I understand with my highly practical theoretical background... bigger sump means more oil reserve (less % of oil for same abount of blow by & oil burn).

umm, yeah.

ebola

yes an additional drain from the head to the sump can help with too much oil in the head. Sydneykid has posted a detailed thread about oil control in rb engines.

Also re the mines baffles, I haven't seen those in particular but there are standard baffles in the cam covers and I have also seen foam used - just like a catch can it is designed to catch oil suspended in air before it goes out the engine breathers...then it drains back into the sump.

The trust sump won't help with blowby but it would help keep your bottom end healthy on the track.

  • 6 months later...

To those adding the extra litre of oil just curious as to wether u leave it in there after a track day (or are u refering to track only cars) or do u change oil straight away after track days an just run normal ammount or what , Just curious. Asked the mechanic who has been tuning my line and he looked at me like I was mad an said not to bother, maybe becaus it was my first track day and on street tyres so he figured Maximum G's were not gonna be a problem. :P

he's probably right, but it is cheap insurance isn't it?

No problem leaving the extra litre in there, and depending on how hard and hot you run it you should probably dump the oil anyway.

he's probably right, but it is cheap insurance isn't it?

No problem leaving the extra litre in there, and depending on how hard and hot you run it you should probably dump the oil anyway.

The way I understand it, is that if there is an extra litre in there then it will increase oil pressure, thus creating more blow by?????

The way I understand it, is that if there is an extra litre in there then it will increase oil pressure, thus creating more blow by?????

True. I found that I got a lot of blow by until it settled at Full. But then I would top it back up and start again, becuase it's always better to have lots of blow by than to have spun bearings.

So even if I had a catch can oil cooler relocator (ie extra capacity and cooling effect) would the extra litre be justified still if I didnt have oil retrictors fitted in the heads. Somewhat concerned about the aditional oil pressure created by the extra oil and possibility of blowing seals in turbo or engine due to it.

At the risk of widening the conversation, I'm keen to get my car on the track and it is pretty much stock engine wise (Apexi intake, cat back exhaust). I'm pretty sure to begin with it is more than fast enough for my driving skills so have started putting $$$ into upgrading brakes first and looking at tires and suspension next.

I'm hearing you guys talk about oils coolers, sump baffles, etc. From an engine standpoint, if I want to track my GTR, what would you invest in part wise what to make sure at the end of the day you can run hard and not toast the motor. I'm looking to building a solid, reliable car that I can crank up the power on as my driving skills improve.

I'm hearing you guys talk about oils coolers, sump baffles, etc. From an engine standpoint, if I want to track my GTR, what would you invest in part wise what to make sure at the end of the day you can run hard and not toast the motor. I'm looking to building a solid, reliable car that I can crank up the power on as my driving skills improve.

Get at least a 19row oil cooler installed and add a litre of good oil. I suggest Castrol Full Synth 10W/60 - "For race proven competition engine" or some marketing talk like that on the bottle

No Melbourne stockish GTR's have had any oil related engine issues on track with the theory above.

So even if I had a catch can oil cooler relocator (ie extra capacity and cooling effect) would the extra litre be justified still if I didnt have oil retrictors fitted in the heads. Somewhat concerned about the aditional oil pressure created by the extra oil and possibility of blowing seals in turbo or engine due to it.

Oil pressure is a good thing. Honestly I don't think you will get enought pressure to cause damage.

Catch can and oil coolers are two seperate things, which I think you know but wasn't clear from that sentance above. But yeah we have been 'advised' to still add a litre or till it's above the 'F' on dip stick

The problems that I have seen are not usually guys with GTR’s on their first day out, but after they have had a couple of outings. They fit some sticky tyres, get the suspension set up, some decent rotors, brake fluid and pads and start to learn the fast way around a track. Then the oil surge problem raises its ugly head, mostly the engines are fairly standard, boost up, exhaust etc. They start using higher rpm more consistently, generating higher G forces both round corners and with later/ heavier braking and acceleration.

The problem is the more consistent higher rpm moves more oil into the cam covers which doesn’t have time to drain back into the sump. The higher G forces further slow down that draining, particularly cornering and braking. Plus they cause the oil to move away form the oil pick up in the sump. It only takes a few revolutions of the crankshaft to cause bearing failure. At 6,000 rpm, 6 crankshaft revolutions takes 0.06 secs, you won’t even notice that on the oil pressure gauge, especially mid corner.

An oil cooler will not help you with oil surge, however it will help keep the oil temperature within a decent operating range. An extra litre won’t do it either, more like a 3 litre overfill would be necessary. But then the spinning crank would hit the oil when there weren’t any G forces to move it away. That is both bad for the crank (impact) and the oil, whipping it into a foamy mess that is not good for lubrication.

So my advice to guys with GTR’s is, sticky tyres and upgraded suspension = a sump with baffles, wings and one way doors.

:) cheers :)

And anyone who knows anything will believe that except anyone in mexico....funny hey.

I know nothing so perhaps thats why. :)

I hate to admit it but as a rule Vic has the quickest GTRs around with a high std of driver in them. (how else tcan they be so quick)

A few of them have been very quick on std motors until they got power hungry. Some slapped turbos on std motors, some built motors as well. The only GTRs that have let go have been old tired std engines with T78s slapped on the side. No real surprise.

So whilst i agree that if your engine is out then its a good idea to do the sump etc. But GTR owners that wrap their cars up in cotton wool because their motors are std are missing out on the fun.

I question anyone in the country that can build/tune cars as well as Vics leading few workshops....so whilst i believe what SK posted...i believe its bordering on the little too conservative side :laugh:

yeh i dont know anything either...i only race a lowly gtst...how could i or other like me compare to the godly gtr drivers. There arent too many quick ones up here..apart from Giant ofcourse.

And anyone who knows anything will believe that except anyone in mexico....funny hey.

I guess we can only go on experience. And what we see is exactly what Scotsman/Roy posted.

The Stock GTR is a pretty good package, if it really is stock then i'd probably just add an Oil cooler and you should be fine to go have some fun. But listen to what SK said, that if you start to do more go-faster mods, don't forget about the safety mods....

I guess we can only go on experience. And what we see is exactly what Scotsman/Roy posted.

The Stock GTR is a pretty good package, if it really is stock then i'd probably just add an Oil cooler and you should be fine to go have some fun. But listen to what SK said, that if you start to do more go-faster mods, don't forget about the safety mods....

Yeh i was only taking the piss in what i originally said. But its strange how down south there you guys dont run into those problems...i dont know about nsw but it happens here. Doesnt just apply to gtr's either.

Sill question? Which side of the sump is the GTR pickup?

There are quick left and right handers in Vic so if its a problem i would have thought it would have shown up at places like PI.

Strange...the only thing i can think of is the fact that Vic guys overfill their engines...others dont. I know Dave (The R32 with a T04Z on a std engine in Syd) overfill and he is kicking.

But meh, me a lowly GTSt driver as well. GTRs guys with all their talk of diffs, brakes and sump baffles... its like using a bobcat to pick your nose :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...