89CAL

I should have known that lol...... Now that you've said it I feel like an Idiot for not remembering haha I put some lube on mine when I put my box back in last time, no more squeaking, and the clutch feels a bit nicer

Yeah LBP is kinda disappointing ATM for me....

Patch harnesses are available to do This Nengun now sell a DJetro PFC meant for a GTR that has been reflashed (afaik) to work on the GTST while still keeping VCT If it's just a normal gtr power fc you will lose the VCT.

Why not just get a standard front mount and paint it black. Far easier to get piping that way I have a GKTech FMIC and it works really well

Yeah as above. Very easily done I had trouble with getting the playstation software on my new hard-drive for some reason. But all I had to do was download it from the Sony site to a hard drive and the plug it into the PS3 Its supposed to just download straight to your PS3 but as soon as you boot it up so not sure what happened with mine

Update your HDD I put a 500gb 7200rpm drive in mine (I only had the 40gb version so go figure) and its well worth the $90 or whatever the hard drive cost me. Have nearly every episode of top gear on the drive so I can just watch it off the PS3 I Still have to get Infamous, keep forgetting. Is it really 7gb? Burnout paradise for a month is better then nothing I guess.... I can see it getting old before then anyway

+1 stuff pulling the gearbox out twice when you dont have to......... Just save for the 25 box if you can get one for $1000

I want to make one thing clear before I say this. This comment is not directed at you, it is a generisation Anyway: The amount of idiot P-Platers I see in V6 commodores, Falcons, Magnas, smaller cars as well is beyond a joke. I see that many trying to "drift" or do hektic skids that It's not even funny anymore. I was never on P-Plates, I got my license before all the new laws came out. But I started in a VL Calais, got all the stupid shit out of my system in that, and bought my Skyline a year before I got off my P's. To be perfectly honest, I've never felt like a better driver then I do now, I look back on some of the shit I did and think WTF was I doing. Like I said, this isnt a stab at you, you could be the best driver in the world. But the P-Plate laws arent just there cause the government felt like screwing everyone over. I dont agree with some of the laws in the P-Plate category, but I agree with the main principle.

Yeah I think pedders may have dropped the ball on that one. My report said 2.1 degrees or something.... Doesnt look right lol. Did a little playing around with my tune today. Trying to fix a funny spot. 5th gear foot down and it goes 13.2 then climbs to 14ish then back down, weird. Added some fuel to a cell that looked like it might be the problem but its still doing it so not sure what the go Is....

Yeah $500 is the most I've ever seen for an RB20DET box, not exactly to expensive

This looks like much more then 2 degrees of camber........ Used some Turtlewax bug and tar remover on my rear pods to get all the tar off that the tires flick up. Works a treat that stuff

Well have the Wideband in now: Seems a little laggy (not to bad, half a second probably tops) but I dont know if it gets better as it gets hotter or if the gauge is just slow. The main point is the analog out from the gauge to run with FC-Edit so I can bring up the AFR's on the laptop and in map watch. Should make tuning alot nicer Pacey: You might know this... Is there a way to bring up two map watches in FC Edit? I want to have AFR and Knock maps both up, but I dont think its possible...... Had a play yesturday but didnt really get anywhere.

also.... how is soot going to get there? The only thing before that is the pod, so unless your filter isnt doing its job or is an oiled filter depositing small amounts of oil.... I dont see it happening

Rocker cover breather hose. Just say it's the breather hose from the rocker cover to the intake manifold for an RB20E (that's what it is yeah?)

Yeah it's annoying. There nice wheels would still be on the car if they were 18's. Let me know when your gonna be in town next hey

There's no real answer. Position them where best suits you without blinding everyone that comes your way

2 things The AFR on INJ map has nothing to do with any inputs from the O2 sensor (AFAIK Anyway) it is just pre programmed as what is expected with that amount of fuel injected 2ndly FC Edit does not support closed loop tuning so still need to tune it

I wouldn't worry about using the AFR's in the INJ map at all. Ignore them and just leave it on correction. Does your wideband have an analog out? If so you can plug this into the datalogit AN1 and AN2 if it's got a ground for the analog out then go into settings somewhere and activate delta an1 an2 or whatever (sorry I'm on my iPhone and can't remember exactally where to go) Then you can bring up your AFR's in map watch (have to change the voltage in relation to AFR in settings) Once again I'm sorry about the info being a bit scetchy, iPhone isn't the best for typing lol

This The amount of cheap yet still decent coolers out there means you can pick up a kit for less then $500 Think of it not as a performance mod (Cause you wont feel much) but more as insurance. Heat is bad, you dont want that And I'd be more inclined to say expect 130rwkw-180rwkw. Depending on how harsh your ECU's R&R is will make all the difference. I only made 140rwkw with my stock computer, 8psi, FMIC, Nismo Fuel Pump, Pod filter, 3" Exhaust

Do you mean in your INJ map when you set it to "AF Ratio" in the bottom right? So that it shows up AFR's in the map? This is just approximate AFR's, Use your wideband to determine your actual AFR's, the AF Ratio on the map is just an estimated AFR

Infamous looks the go then

Im thinking about getting Infamous over dead nation now. Been tossing up and Infamous looks alot better. Dead nation looks to arcade-ish?

Nothing wrong with 9.5 wide...... When you dont have GTR guards to fill in haha

$1200 per DVD, comes with a free set of wheels

What size bolt is it? (measurement across the thread) Def a long bolt but need to know what size as well