Jump to content
SAU Community

Recommended Posts

309rwkw on 22psi

Rb20

Aries Pistons

Standard Rods

Standard Crank

Standard Manifold

GT3582r (.63 rear)

JUN cams and cam gears

Tial Wastegate

Microtech

Dyno sheet up later today

Fairly rushed tune that's fairly rich all round. At that stage we hadn't really finished tidying it up.

michaelsrb20.jpg

  • 2 weeks later...

RB20DET - Stock motor

Custom Intake Manifold by Autoplus

Front Mount Intercooler with aluminum piping

3-inch full exhaust from downpipe

HKS Super Power Flow Filter

TurboXS Manual Boost Controller set to 12psi drops to 10psi

NISTune ECU

AI-dyno.jpg

R32 RB20DET

HKS Cast Low Mount Ext Gate Manifold

Hypergear TR43 HF

Generic 38mm Tial Style Gate

Cam Gears

FMIC

POD

GTR Injectors

Z32 MAF

Remapped ECU

3" Turbo Back Exhaust

242 rwkw @ 21 psi (0% Correction)

Very Responsive for an RB20

post-179-1229573292.jpg

R32 GTS4

rb20det

stock internals

td05h turbo

tial 38mm w/g, plumb back setup

rx7 flowed and tested injectors (550cc)

bosch fuel pump

Link ver5 ecu

600x300 hybrid style intercooler

k&n filter / custom stainless intake pipe

3'' full exhaust

turbo-smart ssq bov (type 2 vee port)

Running an Older Link is the problem here, cant keep up at the end and started to detonate, this was the highest run during tuning 221wkw @ 22psi.. Car is currently running 18psi @ 205wkw

96361397bw2.jpg

Edited by Vanilla_Rice
  • 3 weeks later...
  • 2 weeks later...
:D As requested

Post away you RB20 lovers

Hey just got back frm dyno yest an made 402rwhp/299.7kw@tyres at 20psi in my rb20 32

Mods consist

gt35r .63

cheap top mount manifold

700cc inj

sard fuel reg

3 1/2'' exhaust

walbro fuel pump

wolf 3d an controller

water/meth

intercooler

I have a rb20det motor with stock internals

front mount intercooler

k&n pod filter

z32afm

gtr fuel pump

gtr ingectors

kkr430 turbo

kkr dump pipe

3inch exhaust

nistune ecu

hks boost controler

i had mine tune on dyno at turbotechinics on 10/11/08 and it made 301.2hp atw it peaks at 18psi and drops to 16psi

post-39975-1233479804_thumb.jpg

Rb20 powered s13.5

- Un-Opened 9X,XXXkms RB20DET motor,

- Hypergear TR34 440hp ext gated.

- Tuned Length High Mount Manifold

- SARD INJECTORS....

- a fair bit more..... go to my link in signature for all mods..cbf em' typing all haha!

made 227rwkw on 17psi, with ext gate problem...and coilpacks shitting themselves...so should make more than that with new gate setup and my new packs ive got in on same psi..

img2yr3.th.jpg

but since then has been re-tuned to 14psi, while I get a new gate so I can run some more boost etc... and made 210rwkw on 14psi.. :(

will keep SAU updated on what happens...

***EDIT 3/02/09***

Today Micheal did another tune...

keep in mind it was a 37deg arvo here in Adelaide..

and my lil rb20 pumped out a pretty impressive 242.8rwkw on 21psi!!!!

effn stoked with that considering the day temp etc...

and backed it up with a few more 240+ runs as well just to show it wasn't a once off...

only thing ill be looking at doing is getting a bigger waste gate just to control a lil better as the KKR 38mm on its limits..

img03gf9.jpg

  • 3 weeks later...

RB20DET - Stock internals

R34 GT-T Neo turbo

ARC Front Mount

3" GKTECH Front pipe/Dump pipe

3.5" Trust Mild Steel Straight Through Exhaust with 5" Cannon

Decat

Turbotech MBC - Running 13psi

untuned

Made 171.1 atw on RE Customs Dyno

Should make 200atw with a tune!! :)

RB20DET - Stock motor

Custom Intake Manifold by Autoplus

Front Mount Intercooler with aluminum piping

3-inch full exhaust from downpipe

HKS Super Power Flow Filter

TurboXS Manual Boost Controller set to 12psi drops to 10psi

NISTune ECU

AI-dyno.jpg

Just an update. We did a tune again today, after a major electrical overhaul.

Car is now pushing out 249.14 rwhp and 251.91 lbs-ft of torque. Boost set at 1.21bar dipping down to 0.8bar.

1993 R32 GTS-t

Standard RB20

ARC 105mm SideMount intercooler (50% larger than r34 gtt)

SplitFire Coilpacks

Apexi Catback

Batmbl Split Front/Dump 3inch stainless steel

Xforce hiflow cat

GTR Fuel pump

3A Raciing Airpod

HKS GT2530 with rb20 actuator

Standard Ecu - No Tune

Standard Injectors - maxing out

A lot of thanks to ReCustoms - www.recustoms.com.au

Update 26/2/09

GTR Injectors

Z32 AFM

TurboTech bleedvalve

Nistune - Tuned by Status Tuning http://www.statustuning.com

1.1mm spark plugs

A very safe tune of;

207.9kw atw @ 15psi with 11.5afr

afri.th.jpg boosty.th.jpg kwnm.th.jpg

----

Next update will be 18psi, adjustable cam gears and 12afr :)

Well i just picked up my new ride.. mods are

RB20Det Silver Top (RB POWAH) Lazer Cut In Coil Cover

Cooling Pro Intercooler

GCG Highflowed Std Turbo

Pod Filter

Engine Dampner

Walbro Fuel Pump

HKS SSQV BOV

Stainless Exhaust Manifold

Oil Filter Relocation Kit with Oil Cooler In Rhs Of Mspec Front Bar

Anyways It managed to make a lousy 183Rwkw On 14psi

I have Gtr 444cc Injectors and Z32 AFM all i need now is Power fc and a ballast resistor and then wind my boost up to 20psi and see how I go.. Happy dayz

RB20silvertop

big aftermarket front mount

bosch 040 fuel pump

GT30 highflow turbo

800cc SARD injectors

eboost2 controller

3" zorst

HKS pod

z32 airflow meter

aftermarket dump pipe

Made a lazy 230rkw on 15psi on a hot day !

RB20 silver top (145PSI comp across all 6, 0PSI difference)

TR43 (Garrett T04E internals), internal waste-gate, low mount

3" exhaust with mid and rear muffler

600x300x75mm front mount intercooler

Turbotech manual boost controller

Z32 air flow meter

Standard airbox (bottom half removed) with CAI

3" metal intake pipe

R34 GTR injectors

Bosch 019 fuel pump

Adjustable cam gears (inlet and exhaust)

NGK BCPR7ES spark plugs

Car made 208.8rwkw/364.1nm on 15PSI with a steady 11.5 AFR

Going back for re-tune with aftermarket coilpacks and expecting 220-230rwkw @ 17PSI

Big thanks to Trent at Status Tuning.

Edited by dmr
  • 2 weeks later...
rb20det silvertop

gt2871r

std exhaust manifold

front facing plenum

haltech e11v2

gtr injectors

walbro pump

pwr 600x300 intercooler

PWR 42mm radiator

kn panel filter

splitfire coils

3" turbo back exhuast

224.1rwkw at 17psi :blink:

post-20540-1238295565_thumb.jpg

  • 2 months later...

RB20DET NICS

VG30 Highflow

R33 GTR Injectors

FMIC

Haltech Platinum ECU

3" Exhaust

Walbro 500hp Fuel pump

Greddy EBC

276rwhp on 18psi

300rwhp+ on 20psi (not exactly sure on figure, tuner backed off due to spiking)

Edited by HR31_RB20DET

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...