Jump to content
SAU Community

Recommended Posts

Hey all I need some advice.

On friday night I had a mate over and we were up to around 1am and never noticed anything suspicious. The next morning one of the doors at the front of the house was wide open and the garage remote control was in the middle of the table, which it shouldn't because it's always in a hidden place (lucky the keys to the cars weren't there either). Anyways, we thought nothing of it but a few hours passed and a guy from across the road came over and warned us that he had some stuff pinched from his car. This really put me on the alert so that night I made sure the skyline was locked up and armed and that the garage was secure. I even parked the SS right behind the skyline so they'd have to pinch both cars in order to get to the skyline.

Anyways the next morning, my mum bolted into my room at 2am telling me to get up as she heard the garage door open and all the sensor lights went on. So I went to a window and scoped the place out, didn't see anyone so I grabbed the bad and went outside but didn't find anyone.

I know this sounds a bit paranoid but I think some b*s*a*d (s) are trying to pinch the skyline. What can I do in order to make it less stealable? Should I spend more cash and add something to the existing alarm?

Sorry for the long post but I need help before the car goes Because it's just a matter of time before it does if they keep visiting the house.

Link to comment
https://www.sau.com.au/forums/topic/11025-some-bsad-broke-in/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Another point. Just spoke to my mum and she just told me she saw a guy going round the house a couple of weeks ago checking the doors. Mum confronted him after he tried to get in and asked him "wtf he was doin"...and he goes "here's my business card!"...then walks off.

eek!

That's bad S*%&....

I'd remove the passengers side kick panel so when you park it you can pull the ECU out easily !!

There is no way they'll get it going without one...

But doing that might prevoke him into coming to get you to get the car going......

Other than that, pull a few critical fuses out of the engine bay or get yourself the biggest, badest, ugliest, Rottie that hasn't been feed for a week, and let him sleep in the garage.....

ha ha ha @ predator

Boosted, that sucks man, i am stressing for you... :P i dont know what to suggest... try sitting in the SS out the front on the street one night and wait for them to come back?

as for disconnectin the battery. tis good. but get this. when i worked at the liverpool cinemas. we had staff who would take off leads and stuff to make sure their car didnt get knocked off. anyway, 2 of these guys had their cars done over and stolen! cunning bastards take parts with them, but yeah, disconnecting is a friggin good deterrent

people casing out your house ... that's not good mate :P

not really sure what you can do other than keep a weapon hidden (a bat or something) so that you can go out there and get them if you hear anything. also like adam said set up a camera that records everytime it detects motion.

forget the bat mate. they'll try to steal the car, you'll dash out with a bat and end up smacking 'em and they'll sue you. you'll end up wishing them just stole the car...

the best deterrents are visible ones, just make your car look too hard to steal and they'll go looking for another. i had a friend who was too cheap to buy a club-lock. instead he got a length of thick chain and ran it around the pedals and steering wheel. then locked it with a big ass padlock. he never had a problem.

Guest Diabolik1

bad news mate :P

id setup a camera that records whent here is motion, and maybe hook it up to a TV and VCR in your room so you can see it recording.....or like someone said earlier, get some heavy chains and chain it up somehow...

hope all works out for you man, and the thief goes to jail!

Goz

When I had an EFI in my 240Z, I had the relay for the fuel pump wired into one of those mounting blocks. Whenever I left the car anywhere, I simply took the relay with me. Its something they wouldn't expect to be missing.

So either a (removable) relay onto the power input to the ECU, or maybe just a hidden switch.

Or you could try the Jaycar In-Car alarm - 110dB screecher siren mounted INSIDE the cabin. Worked for me.

Why remove the relay when you don't need to....

Have a look at this link: http://www.dynamco.com.au/Sales/nostart_001.html

This is a great idea, but last time I checked (over 6 months ago) it still wasn't available in Australia, even though it was developed, designed, and produced here by an Australian company....

And if you catch this prick, he cant sue you if he goes missing, can he..... Tie him up, and gaffa tape him in your garage for about a year, feeding him virtually nothing. Make sure you give him just a bit to stay alive (painfully). After a year, cut off his food supply so he dies from malnutrition. Then dump his smelly body in a park somewhere... Ppl will then think he was just a bum, and no one will give a rats c**t about him!

Problem solved.

Boosted, this would be a serious long shot but you said you found the remote in a weird place. Is it possible that whoever the theiving little prick is has sourced another remote for your garage with the same frequency? Its normally as simple as getting a replacement from the company that makes them and programming it the same using the dip switches in the back.

I hope this isnt the case - Maybe it might be an idea to have the garage door controller box reprogrammed or recoded?

Sounds very sketch either way. Be careful

1. Like BY BY said, Change the frequency of your garage door, the new ones dont use dip switches so your one must be the older type. Just look up the manual or call someone to come over and change it for you. Another suggestion is to unplug the thing of a evening and just just a few garage door locks to keep it closed. I suggest the sliding door locks.

2. Call the police, tell them whats happening. Its their job to look out for you and they may be able to help out. Its also good if you told them just incase something happens later.

3. Sensor lights are your best friend, another suggestion is to get a simple alarm system for your garage, perhaps a few screamers with a motion sensor and a remote arm switch. You could get this from jaycar or an alarms reseller.

4. Tell your neighbours just in case they dont know, and give each other your mobile numbers. Neighbourhood watch works people.

5. Big dogs are cool, but easily defeated like in the movie Fletch. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...