Jump to content
SAU Community

Recommended Posts

does anyone need stuff taken up for the EC part of the trip like extra tyres etc

i am leaving for coonabarabran tomorrow morn and meeting you guys in syd or @ec

probabl a bit late but i have a van and thought i better let you all know

  • Replies 351
  • Created
  • Last Reply

Top Posters In This Topic

The universal measurement of beer is a PINT

But - Matt K, I'll call you later to confirm details, but will pick you up about 4.25am, Alan will meet you at the FWY onramp at about 4.30am

*shudder. So early...

Pft - if we do have to, paying to watch = ghey!!! :)

You city folk reckon you guys are getting up early, spare a thought for those of us who live in teh bush and how early we have to get up.

My head hurts just thinking about it.

4.30am! WTF! It's 5.30 at Donnybrook which is 30 mins from the onramp at that time of the morning!

If I am there at 4.30am, I really hope you are too as with a full days driving, I need all the sleep I can get dude! :)

The plan was to meet at 5am saff.

Once we have everyone, its time to go, so we assumed 5.30 departure but if we are ready before that we'll get an early start.

OK np, 4.30am it is then JW. Better drag myself to bed ASAP. Catch you in the morn.

This is the final drew that I know of:

Snowman (R34 GTR)

Aaron (R34 GTR) - meeting us up there i think

John (R33 GTR)

Scotsman (R33 GTR)

Jack (R33 GTR) - meeting us up there i think

Gareth (R32 GTR)

Nige (R32 GTR)

Alan (EVO VII)

James (EVO VIII MR)

Paul (R33 GTST) - not racing

Andrew (R31 GTS) - meeting us up there i think, spoke to him today

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...