Jump to content
SAU Community

Recommended Posts

Yeah i know its cheap for what it has in it, blu-ray players are $1500 alone in the shops. But for a mass produced unit i just think they could have sold it for a bit cheaper, as they will no doubt make MASSIVE profits off the software to re-gain the hardware losses.

The hd-dvd addon drive for 360 is $250.. for essentially the same quality. Blu-ray being included in the price of the ps3 is no special bargain.

  • Replies 459
  • Created
  • Last Reply

Top Posters In This Topic

haha ok thanks for the info.

Just an update, I have paid off my PS3 pre-order in full. I got EB to price match the ToysRUs pre-order deal as they were more then happy to do it.

So I got the PS3 + Resistance Fall of Man + Motorstorm and 50% off another game for $1099

Being a VIP member at EB I also got $30 off Tony Hawk

All up it cost me under $1400 for my pre-order which is the following

PS3

Motorstorm

Resistance Fall Of Man

Tony Hawk

F1 CE

Ridge Racer 7

I haven't head anything about the Australian version being cutdown. I have also just done some research to see if I could find anything but alas I turned up nothing. Can you point in the right direction on where you found this info?

i wouldn't waste your time with F1, it's subpar as have been f1 games for some years now.

Also if we are going to do the debate of hd costing 250 on the 360 also throw in the fact wireless for the 360 is 169.95.

The 360 is great, the ps3 will be great, not one title on launch is a system seller. As is with every new console almost, which i have pointed out before.

by the sounds of your job hanyou we may be talking to each other as well!

nobody by the looks of things... :P price is too high for joe consumer for a while.. including me..

The launch of Sony's PlayStation 3 games console got off to a feeble start last night last night with officials, media and security outnumbering customers for most of the evening.

Over 500 retailers around the country threw open their doors as the clock struck 12:00am, expecting the frenzy that accompanied the games console's overseas debuts.

But most stores were virtually deserted, despite the 20,000 pre-orders Sony said it had received.

Even at the official launch event held at Myer's Pitt Street store in Sydney's CBD and attended by Sony's local managing director, Michael Ephraim, media and security outnumbered PS3 fans until at least 11:00pm.

At midnight, about 40 PS3 buyers had arrived to collect their consoles, causing distress for the army of camera crews who turned up expecting to capture launch mayhem.

Desperate producers unashamedly asked the crowd to fake excitement when the cameras were rolling, while a team from 2Day FM let out bogus cheers to convince their radio listeners that a launch extravaganza was underway.

The scene was a stark contrast to the US launch in November last year, where one man was shot by thieves and fights broke out over limited stock.

yeah well I guess considering people like me who bought one 5 months ago at the real launch would have lost interest by now, and everyone else would be sick of hearing wankers like me banging on about how they got their PS3 in early november!! lol

big mistake by sony to no release it simultaneously with the rest of the world. it's certain to have pissed people off who feel they are no longer buying some special, brand new, latest console. 5 months ago it was the shit. now it's just another console (albeit a damn good one).

I wouldn't mind one.. but $999 is a lot when there aren't a heap of games to choose from right away.. I will probably wait 12 months until there are a few more games to choose from.

I think the price here is about $109 for most games - why would anybody buy games locally when you can import them for about $75 thanks to a high aussie dollar?? Sony is strange sometimes.

^^^

well almost every console in the world is released here later than oversea's so i don't see how that would of made a difference at all.

PSX was launched in 94 in japan, 95 in australia, ps2 was released march 2000 japan, and october 2000 in australia,

gamecube was launched september off the top of my head in japan and march the following year here,

psp was launched in november in japan and mid the next year over here.

So i don't see where you are going with that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...