Jump to content
SAU Community

Recommended Posts

45490E44-5581-44B9-920D-03534290D6B9-495

D21BDD3F-8E83-42B2-B773-5F877E35093D-495

8 hours of polishing later.

Jezz i love those rims! if only they were easier to find!!

What offset are they mate?

I have the enkies 18 x 10.5 +12 i think they are. Im thinking i want to fill the gaurds a bit further....

Thanks man.

They're 18 x 10 + 12 with 285 RSR's on them. The tyres are a tad wide for those rims.

They definitely are not an easy rim to find. So damn light at 7.45 kg.

Ah maybe thats why they look like they fill ot the gaurds better then mine. im running 275s. im thinking before i change rims i should try running some 295ish and see if that makes it look like it fills the guards

I think we`ve been through it before.

It was an inside joke with my mates, they have a soarer and supra.

Ironically both lemons, hanging a toyota badge is like saying to them "do you need me to tow you around, mate"

just shit stirrin`

Same as my mate having a piston hanging of his rx7

just shit stirrin`

ahhh my other love, shit stirring! Go the whole way and rip off the Nissan badges and replace with them with Toyota!

Lowered the old girl and debadged the gtr rims

DSCN2030%20%281024x768%29.jpg

That looks really good! Almost looked like a GT-R for a second there, probably the front lip and wheels. What size tyres you running? Did you have to roll guards? Might get a set of those for myself, and PC them black!

Edited by colourclassic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...