Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

I don't. I change at 10,000km.

But your interval depends on the oil you are using, how hard you drive your car, what kind of air filter you use and how rich your car runs.

5,000km is a safe bet for most cars but sometimes overkill for others.

Well my car is completely stock, Synthetic MOBIL 1 oil and I dont really drive it hard, so yeah if its not really necessary then Ill wait till it hits 10000km.

Dont really know the maintance of a turbo car hance this is my first one, for the lude I just change it every 10000.

My car servicing people told me that every 10,000kms is ok for my car and its a stock r34 gt-t sedan. So far it has done 7000kms so far and no issues so i think it is ok.

But I have read alot of other people mentioning 5000kms on the dot but then again I spose its up to the owner as there appears to be nothing written in stone on this.

Drew.

My GTT have nearly done 5000km since Ive first import it, dont know if I should change it soon or wait till Ive done 10000. Just wondering if the majority of you guys change your oil every 5000km?

It actually depends, try to get hold of a UOA (used oil analysis) kit which someone here mention for $40 a shot. The analysis will tell you if the oil is good to go or not.

Edited by Trex101

I have always changed the oil and oil filter at the recommended intervals and use the best oil that I can afford.

I see this as good insurance and over the years it has paid off as every engine that I have pulled down has had minimal wear compared to what would be expected for the age.

I am currently using Motul Chrono 300v in my Skylines and after 5K it comes out cleaner and in better condition than most oils are when they go in.

I remember reading a UK thread years aga and everyone there was doing the same debate on the 5000 change...most people did do the 5000 change but they're in miles so realistically, that's every 8000/kms.

The '5' seems to be a magic figure.

..so anyway, i guess if you do every 5k, you will be damn safe, just have to figure out for yourself if it's overkill.

(I personally would go for 10k but thats me)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...