Jump to content
SAU Community

Recommended Posts

Yeah Duncan with the amount of posts he has he's obviously a big contributor to the forum, not likely he's shot through especially considering he's sent everyones mat bar two. Just don't like sending money off that disappears without a word, hopefully Chuckie is alright and hopefully mats are on their way.

  • 2 weeks later...

please tell me theres more of these left

Have you read the last page? There's still a couple of members who've paid money and are still waiting for a mat with no contact from seller. Mine's from November last year.

Just a heads up.....

  • 3 weeks later...

Thought I'd post a piccie of my new dashmat I just bought for my M35 Series 2.

web.jpg?ver=13343898430001

I got it from a US company called Dash Designs. Basically it's a 2005 Infiniti G35 dash cover custom made for right hand drive. I took a punt buying it as the G35 is essentially a left hand drive Skyline V35 and the V35 appears to have the same dash as the Stagea. Well, it fits perfectly, which means the V35 and M35 dash's must be identical. It has a cut-out for the auto headlight sensor but it doesn't have one for the passenger side sensor, which I'm not sure if it is a sensor at all. I also need to confirm that it doesn't affect the passenger airbag (It's really lightweight so I guess it wouldn't). The lump above the clock is a sensor (ETC?) of some sort which I hope to remove once I know it's not important. The mat is not stuck down at the moment. The small separate piece over the instrument binnacle definitely needs some velcro to hold it in place.

What I'm not sure of is whether it will fit a Series 1 M35 or V35 given they have a different clock surround and binnacle surround to the Series 2. The earlier model G35 in the US has an analogue clock below the climate control display so it would look odd.

Anyway the company was really helpful, they have many different fabrics and colours and can also embroid a logo or word on it. My one is a perforated suede look which ties in perfectly with the perforated leather seats and door trim.

Cheers

  • 4 weeks later...
  • 5 months later...

Not certain but I have seen factory-fitted dashmats with both the "flap" version and the cutout. As long as it's a "flap" which can fold up during airbag deployment, and the hinged section is above the airbag, then it should be OK?

  • 1 year later...
  • 2 years later...
On Fri Dec 07 2007 at 4:11 PM, chuckie said:

G`DAY ALL just to say i have 2 mat`s left.I will not have any more made at this time.CHEER`S chuckie

Hey mate just wondering if you still have any of these for sale.???

I know it's a long time ago but I am hoping.

Cheers pete

Okay so i've found a website that does dashmats, but not for stagea lol. I might try email them and see if they can do a custom one. Otherwise does anyone know if there are any similar dashes on other nissans that might roughly fit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...