Jump to content
SAU Community

Recommended Posts

T517Z's 2860R HKSGT2530

At 95km/h, 85kw, the 2860R's 95kw 90kw

At 112km/h, 105kw compared to 140kw 120kw

At 128km/h, 155kw compared to 240kw 200kw

At 145km/h, 255kw compared to 305kw 313kw

At 160km/h, 330kw compared to 325kw 315kw

At 178km/h, 360kw compared to 350kw 355kw

At 194km/h, 365kw compared to 358kw 372kw

I have no idea what boost or mods the other GTR's had..

I have

Tomei 260 9.15 cams

87mm pistons

1mm oversize valves

chinese manifolds

ARC twin entry intercooler

twin 3" exhaust

Apexi pods

PFC

22psi

AFR 11.2

  • Replies 157
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

T517Z's 2860R HKSGT2530

At 95km/h, 85kw, the 2860R's 95kw 90kw

At 112km/h, 105kw compared to 140kw 120kw

At 128km/h, 155kw compared to 240kw 200kw

At 145km/h, 255kw compared to 305kw 313kw

At 160km/h, 330kw compared to 325kw 315kw

At 178km/h, 360kw compared to 350kw 355kw

At 194km/h, 365kw compared to 358kw 372kw

I have no idea what boost or mods the other GTR's had..

I have

Tomei 260 9.15 cams

87mm pistons

1mm oversize valves

chinese manifolds

ARC twin entry intercooler

twin 3" exhaust

Apexi pods

PFC

22psi

AFR 11.2

BOOSTD, thats very interesting, the 2530's are very similar to the 2860R's, looks like the 2860R's still have more down low till about 178km/h, the 2530's have more top end..

I have the same cams, same pistons, standard valves, standard manifolds, trust intercooler (76mm thick), 3.5'' HKS Hiper exhaust, same pods, but both were done at 20psi boost. Not sure on AFR, as graph has power and boost level....

Can't wait to see how you go with the 2860R's....

Also don't forget each dyno is different, and mine wasn't done in 'shoot-out' mode...

ok sweet, I'll do a run at 20psi aswell. I will be using the same dyno in shootout mode. I have changed back to the standards manifolds however match ported to the turbo's as they were a good center meter out. Chansing average power rather than top end, my previous setup was ever so slightly laggy for my liking.

JAGR33 if im reading that right it 2530s make more power by 145kms then not much and back up again.Because his graph has a dip in it at that point(wheelspin maybe) anyway both come alot nicer then the T517z by the look of it.

JAGR33 if im reading that right it 2530s make more power by 145kms then not much and back up again.Because his graph has a dip in it at that point(wheelspin maybe) anyway both come alot nicer then the T517z by the look of it.

Yeah your right, although at 160km/h the 2560R's are making more power....

BOOSTD, if the 2530's were a little laggy for your liking, I can assure you you will like the response of the 2860R's....

Either way, they are much more responsive than T517Z's.... Bush bearing versus dual ball bearing....

This car has -5s and the tune has more left in it because the boost controller was playing up.

Now has better controller and large injectors on the way so we can crank more boost into it.

For turbos not much over 1k each their hard to beat.358rwkw

This car has -5s and the tune has more left in it because the boost controller was playing up.

Now has better controller and large injectors on the way so we can crank more boost into it.

For turbos not much over 1k each their hard to beat.358rwkw

thats unreal man cant wait to see what these make with more power make sure ya post dyno results....

  • 2 weeks later...

Ok, my 2860-5's are on. In forth it makes 15psi at 4200rpm. which is a few hundred rpm at least under my 2530's. I have only run 1.4 bar so far. I'll change my plugs and run 1.75 for a comparision run against my 380rwkw HKS GT2530's

Ok, my 2860-5's are on. In forth it makes 15psi at 4200rpm. which is a few hundred rpm at least under my 2530's. I have only run 1.4 bar so far. I'll change my plugs and run 1.75 for a comparision run against my 380rwkw HKS GT2530's

they look like unreal turbos.im so glad i picked them over the gt-ss...

im still waiting for mine to turn up :thumbsup: but well worth the wait aye

This car has -5s and the tune has more left in it because the boost controller was playing up.

Now has better controller and large injectors on the way so we can crank more boost into it.

For turbos not much over 1k each their hard to beat.358rwkw

hey nib what were the specs for this car ?

i have so far amassed :

gt2860-5 x2

sard 700cc inj

nismo fuel pump

greddy dump/front in one (the one with LONG split pipe)

nismo cat /hks catback

powerfc djetro

still debating tho

tomei exhaust manifolds

pon cams

adjustable cam gears

if anyone has any thoughts on if these extras will be worth the cost I would love to hear

sorry for mini hijack

Edited by arkon
hey nib what were the specs for this car ?

i have so far amassed :

gt2860-5 x2

sard 700cc inj

nismo fuel pump

greddy dump/front in one (the one with LONG split pipe)

nismo cat /hks catback

powerfc djetro

still debating tho

tomei exhaust manifolds

pon cams

adjustable cam gears

if anyone has any thoughts on if these extras will be worth the cost I would love to hear

sorry for mini hijack

cam gears and cams are a must, stock manifolds will be fine....

Car has Stock ported exhaust manifolds,Arias Pistons,Eagle rods,N1 oil pump,260 Tomei Poncams + gears, stock head,Stock GTR intake manifold with single throttle kit,600cc injectors and V400 Wolf ECU.

Big injectors and full tune coming when we open at Topracing after our Xmas break.

Car has Stock ported exhaust manifolds,Arias Pistons,Eagle rods,N1 oil pump,260 Tomei Poncams + gears, stock head,Stock GTR intake manifold with single throttle kit,600cc injectors and V400 Wolf ECU.

Big injectors and full tune coming when we open at Topracing after our Xmas break.

sounds like quiet the collection there mate,how much power ya aiming 4

Thought I'd comment,

this is my old motor with 2530's and low boost with a poor cat, same sort of mods as you guys minus the computer still using the stock one modified and no cam gears

Old engine hks 2530's

Fresh motor and some extra goodies should see over 500rwhp will be on the dyno in the next month hopefully

Edited by monga
Thought I'd comment,

this is my old motor with 2530's and low boost with a poor cat, same sort of mods as you guys minus the computer still using the stock one modified and no cam gears

Old engine hks 2530's

Fresh motor and some extra goodies should see over 500rwhp will be on the dyno in the next month hopefully

thats nice power...

let us no when ya tune it...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...