Jump to content
SAU Community

Recommended Posts

I bigger exhaust system can always pass a noise test, and probably an EPA inspection to, providing its below 90dB at the required RPM, and doesn't go over the level of emissions from the rear of the system.

Hi um i dunno if this helps but i had 3 1/2" catback then i gat the epa notice, so i had a good look at what i had under the car and found a Flange plate just under the the rear axel that had the cannon attatched, so i went to an exhaust place and got them to make the back bit out of 2 1/2" with a nice big quite muffler. It cost me 140 but at least they done what i wanted other places wanted me to replace the lot for 350!. Anyway the test showed a nice quiet 80 db.

I noticed that i had no power, no noise and no fun. so as soon as i passed the test i chucked the cannon back on all better now, and when i get another notice probably next week i already have the solution!

>_<

Thanks for the feedback, because i failed the noise test, im getting a standard exhaust fitted for the next test. I really doubt its 98db, but oh well, the exhaust shop says it is, have to believe him i guess.

Thought i'd mention that my mate got his EPA done and they checked mods under bonnet (checked for pod, (has fmic) and boost controller. Also looked at the exhaust and asked if my mate put it on prior to the test (it's this tiny gay thing i had re-installed that i bought for an exhaust noise test) my mate said nah this was on it when i bought it, last owner was 1 who got the epa. Then did the emissions test (we didnt have time to find a stock ecu so we didn't bother) and that passed luckily >_<

Dunno what he's going to say next time though :(

Your mate nearly caused himself a big drama by telling lies.

Its illegal to sell a car with an EPA on it.

If the officer goes and reports, you'll find you might get another visit, or a please explain

Nahh it hadn't been issued whilst i was the owner, EPA arrived in the mail at his house about a week ago, and it went straight to him but he was saying that it was meant for the car whilst the previous owner was driving it, if that makes sense. Was weird though at the actual EPA joint the guy had my name down so they confused themselves somewheres

I was told that if the car gets inspected again, once it has passed the noise test and have been found for excessive noise and has a different exhaust it needs to go for a full ADR compliance which costs 500 bucks. Anyone has had experience in this?

Unless the officer is writing down exactly what the exhaust was, diameter for diameter.

Then the EPA dont know, how can they? :blush:

As long as you rockup to the test, with the same exhaust as what was noted on the test prior. Then its instant pass either way.

Unless the officer is writing down exactly what the exhaust was, diameter for diameter.

Then the EPA dont know, how can they? :(

As long as you rockup to the test, with the same exhaust as what was noted on the test prior. Then its instant pass either way.

I forgot to mention its not the officer that told me that, its actually one of the approved noise testers, as I only went for the noise test instead of the full emission test. But yea i guess you are right, I doubt they know the exhaust layout's design, ie , a straight flow as opposed to a standard one with another box before the rear muffler. Thanks for the help

Cheers

I heard that if your car is manufactured after a certain year you can have a POD without a box, which year is this? Does anyone know?

Please READ this thread. It is already answered quite clearly

Just say you have both a FMIC and PODs and you also have a full engineer certificate what will happen?

will the engineer certifcate allso clear everything including bigger turbos, exhausts, BOV, perfomance mods etc.etc.??

Edited by Shadow01

speaking to a worker from the local exhaust joint tells me under the new VIC LAWS

1st epa free

getting caught and going back to the epa a 2nd time $500bux penalty, because people just keep removing mods=to keep the epa happy then when they get home just put all their mods back on, BOV, pod, loud exhaust whatever is'nt EPA friendly...

speaking to a worker from the local exhaust joint tells me under the new VIC LAWS

1st epa free

getting caught and going back to the epa a 2nd time $500bux penalty, because people just keep removing mods=to keep the epa happy then when they get home just put all their mods back on, BOV, pod, loud exhaust whatever is'nt EPA friendly...

What you were told is in essence correct, however. It all comes down do what is documented by police/epa, and as a direct result of this, what they can prove.

Some people have been asking why police take photos of your car when you are defected, it is so they can keep track of your mods. For example if you are continually defected for 2 intake mods, boost controller and/or ecu but every time you get tested by EPA your car passes they will wonder why you keep getting sent back. If the police can prove that you have these mods usually, but are simply removing them in time for EPA test then you can find yourself in trouble.

I have always found that with EPA it's a case of; 'I'ts not illegal until you get caught'. Many cars pass Mcleod with things they shouldn't, (I have personally passed with atmo BOV, aftermarket ECU and variable boost all at once!) you just need to work out what they look for and what they dont.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...