Jump to content
SAU Community

Recommended Posts

Thanks for the info stolen_s15

It might be easier if I just post up the car's mods and if anyone can tell me which is defectable, apart from boost controller. Couldn't find any info on whether other items eg., turbo timer defectable.

HKS split dumps

HKS front pipe

HKS hipower catback (legal noise I think)

HKS adj cam gears (IN/EX)

HKS timing belt with Trust clear cover

Apexi pod air filter

Turbo timer

Nismo twin plate clutch (super coppermix)

Cheers. Much appreciated.

I seriously doubt your exhaust will pass noise. Thats about your only problem, but do read the regs i posted, it will give you a better understanding.

Well i got a Decfect this morning dunno what to do yet im in a hole bad any ideas on what i should change on my r33 gts-t?? i got

rb26/30 engine. what do i do with the engine remove or gamble?

motec ecu

3inch exhaust legal

front mount intercooler

boxed up pod filter similar to standard.. do i need the sensor re-fitted and working or just fittedand make it look as if working?

gt35/40 turbo. would this be ok if im running standard boost or change back to standard?

boost controller which im ganna remove.

can i keep the waste gate or do i have to remove it seeing i have already removed the boost controller?

i got an after market low mount exhaust manifold is this ok?

550cc injectors are ok?

Well i got a Decfect this morning dunno what to do yet im in a hole bad any ideas on what i should change on my r33 gts-t?? i got

rb26/30 engine. what do i do with the engine remove or gamble?

motec ecu

3inch exhaust legal

front mount intercooler

boxed up pod filter similar to standard.. do i need the sensor re-fitted and working or just fittedand make it look as if working?

gt35/40 turbo. would this be ok if im running standard boost or change back to standard?

boost controller which im ganna remove.

can i keep the waste gate or do i have to remove it seeing i have already removed the boost controller?

i got an after market low mount exhaust manifold is this ok?

550cc injectors are ok?

Should have been smart about your creation because its not looking good :)

ECU - fail

Exhaust - likely to fail

FMIC - fail

No AFM - fail

Bigger than factory turbo - fail

Boost controller - fail

Wastegate - 150% fail

Manifold, useless, needs to be twins.

550's - fail

So, thats a big epic fail for you mate if you go to the EPA.

Then there is the issue of Engine number and so on for the RWC side/Vicroads etc.

Should have been smart about your creation because its not looking good :)

ECU - fail

Exhaust - likely to fail

FMIC - fail

No AFM - fail

Bigger than factory turbo - fail

Boost controller - fail

Wastegate - 150% fail

Manifold, useless, needs to be twins.

550's - fail

So, thats a big epic fail for you mate if you go to the EPA.

Then there is the issue of Engine number and so on for the RWC side/Vicroads etc.

It happens to be a noise epa becos they didnt look under the bonnet only complained abut the noise so will they test everything or just the noise?

It happens to be a noise epa becos they didnt look under the bonnet only complained abut the noise so will they test everything or just the noise?

If its noise only they wont look at anything else and you can go to a number of different certified workshops to get it tested. Mine failed on a similar thing and I got a custom exhaust end made that passes legal noise levels. Then they hand you a form with a pass and you mail it off to the EPA.

I was lucky I had a flange towards the rear of the exhaust, so they made an addition that would bolt on to that.

Mine was done by Noble Park Brake and Clutch. Had a very good experience there, happy to recommend them. I think the custom exhaust piece cost me $140 from memory. Most noise levels testers will only charge you once so the sound test especially if they fix the exhaust for you.

Almost anything bar a stock exhaust will fail. So whatever you get made will choke your car and power will disappear, but thats all you can do. If you can buy a whole second hand factory exhaust thats probably ideal.

It happens to be a noise epa becos they didnt look under the bonnet only complained abut the noise so will they test everything or just the noise?

So you already have the letter thats come in the mail???

Because until you get the letter in the mail, there is no way of knowing what you've been reported for.

The officer might have said it was too noisy, but that wont stop him from sending you for the full ringer EPA test @ Macleod Testing station.

You might as well get the exhaust made and correct so it flows, and is under 90dB.

I've just about got my full 3.5" to 90dB (92dB currently), its currently back in for work and should come out perfect. :)

who restrictive is the new exhaust power wise? like what was your power putput b4 and after the new exhaust?

Im planing of going standard all the way except for the engine,front mount ,exhaust. Well i made a big error of not knowing what im getting into now i realise but too late well its never late :)

what did u get defect for?

u need a rwc so does the bottem end match the rego sticker, if it does how far u from airport west?

did u get epa'd?

yea for the exhaust but how would i go about getting the bottom end matching the number on the rego sticker? im about 45min drive from air port west.

Lucky its just an exhaust epa. Funny thing is, a stock GTR won't pass a noise emission test. The government changed the rules a few years ago.

Instead of testing cars at 3000rpm they moved it up to around 5200rpm for GTR's. A stock GTR wont pass.

My advise. Get a stock exhaust and put as many baffles in it as you can.

(PS. Steel wool doesn't stay where you want it).

hey guys (sorry if this has been covered)

I received a letter in the mail stating that i have to get my car checked out by one of two places:

(werribee or moorabbin) where they do a full emissions test on my car.

mods are in sig...

i have a question regarding my Fmic, will this pass the test because i do have a standard airbox on

or will i have to put the SMIC back on also .

Also my local exhaust checked the db reading and it came to 92db (3inch exhaust)

Is there anything i can put on my exhaust (legally) to reduce the noise and if there isnt

Can i just change back to a standard cat back exhaust but still keep my split dump pipe.Will that pass

Cheers

They are only guidelines - down the bottom it says for more information to contact them.

So either way, im telling you, they are illegal. I've been to the EPA enough to know what does and doesnt pass :domokun:

If you dont think im right, by all means contact them, or try to get past with a GT35. I'll look forward the Lou's response to it (the inspector @ Macleod) :stupid:

Phatboy - have you read even one post in this thread?

I mean, im trying to be nice, but that question is simply silly.

IF YOU HAVE THE FACTORY INTERCOOLER YOU ARE ALLOWED NON OIL PODS AND VICE VERSA.

As per the 3rd post of this thread. Its there plain as day in the post, im think going to start cleaning this thread so it stops getting filled with 50 repeated questions...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...