Jump to content
SAU Community

Recommended Posts

Got my roadworthy today. Much better than previous place, just had to change the tint on the front windows and get rid of the pfc controller.

Where did you get it done?? Or has anybody got a place that is slightly lenient on us??

heres an interesting question

the car i purchased came with a roady (was less than 30 days ago)

Over the past week ive noticed that there has been an oil leak or two off the bottom of the engine. the main leak is coming from the sump plug hole. Replaced the sump plug in the hope that it was the problem, but it still seams to be leaking. there also seems to be another oil leak, but im unsure where it is.

now here is the question lol

isnt the roady supposed to pick up on such things as oil leaks?

if this is the fact, is there recourse against the shop that issued the roadworthy to fix these problems because they missed them/overlooked such issues?

cheers

They are not meant to sign of a rwc if car has oil leaks...a rwc is valid for 30 days from date issued...if I were you id take the car with the cert back before the 30 days is up, you might have a good chance to get it fixed free of charge.

They are not meant to sign of a rwc if car has oil leaks...a rwc is valid for 30 days from date issued...if I were you id take the car with the cert back before the 30 days is up, you might have a good chance to get it fixed free of charge.

thats what i thought.

however im not a fan of good chances, id rather a full chance

A leak can develop after the RWC is supplied.

You'd have to prove beyond reasonable doube it was there when the cert was signed.

thats what i was worried about.

would the oil/grime caked onto the sump prove?

any other way i could prove it?

From what ive always thought, a rwc check doesnt actually fix any problems if they arise, they only note them down. So if you go in there with leaks they might cancel the certificate and get you to fix them (at your cost) before they will certify it again.

Davey32 you have a PM.

^^

lol

don't like your chances unfortunately, cant hurt to ask but they will be on the defence straight off since your basically saying to them they are in the wrong.. often doesnt go down well

Problem is unless you take a photo of anything wrong straight after buying the car they will just say 'oh that happened after', i'm not talking about really bad stuff like cracked screen or bald tyres, but things like oil leaks or whatever they can be cleaned of for the roady and then start leaking after a few days, no way you can prove otherwise.

i got epa'd, stupid thing is, when they said I was "spotted", I was at work, and my car in the work parking. i didnt even drive through the place.

I've had it cleared but wtf are these idiots doing.

i got epa'd, stupid thing is, when they said I was "spotted", I was at work, and my car in the work parking. i didnt even drive through the place.

I've had it cleared but wtf are these idiots doing.

same thing happened to me, apparently i was driving on a monday night at 12am about 2 weeks before i was heading overseas

thing is i was asleep because we were busy trying to finish off as much work as possible before i left

problem is you cant contest it because they will still say test the car and prove its not to loud etc

same thing happened to me, apparently i was driving on a monday night at 12am about 2 weeks before i was heading overseas

thing is i was asleep because we were busy trying to finish off as much work as possible before i left

problem is you cant contest it because they will still say test the car and prove its not to loud etc

Couldn't you contest it with a factory exhaust? Assuming of course it was on at the time.

they would still ask for you to test it though, thats the thing... there is no point in contesting

at the time i had my old exhaust on anyway, a lot louder than whats on now but thats not the point

i was stung even when i wasnt driving :(

i got epa'd, stupid thing is, when they said I was "spotted", I was at work, and my car in the work parking. i didnt even drive through the place.

I've had it cleared but wtf are these idiots doing.

That's gay that you can get your car epa'd when parked.

Though I woulda thought the wagon would of been safe :ninja:

That's gay that you can get your car epa'd when parked.

Though I woulda thought the wagon would of been safe :ninja:

It is generally safe but we are in Vic, if it's anything to up their commission theyll do it, I remember on my p's driving dads falcon which is stock as a rock. And he got epa'd for the time I was driving. If they can they will. Oh and my car wasn't on ferntree gully rd like they said it was parked in undercover secure parking at work in the cbd

It is generally safe but we are in Vic, if it's anything to up their commission theyll do it, I remember on my p's driving dads falcon which is stock as a rock. And he got epa'd for the time I was driving. If they can they will. Oh and my car wasn't on ferntree gully rd like they said it was parked in undercover secure parking at work in the cbd

can you prove it was parked in the cbd at the time of EPA?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...