Jump to content
SAU Community

Recommended Posts

That was my question, "do I have to physically hand it in?" :P.

Sorry I had a better read of the letter; yeah says I can fax or mail it in as well. Have to call for a receipt of the fax after you send apparently... man I haven't sent a fax in forever, don't even remember how xD.

  • 4 weeks later...

I know this question must have been asked a million times before, but does anyone know of a mechanic in the eastern suburbs that can write a road worthy without picking on stupid stuff like kmart tyre & auto do? I'm selling my car and I need a RWC, not a dodgey one because the car is pretty much standard and in great condition.

  • 4 weeks later...

so whats the go on EPA noise inspection, will a clamped on muffler pass if its under the DB limit or will it fail due to not being welded on, much like the bolt on silencers?

such as...

EXHAUST-COUPLERS-SINGLE_COUPLER_ALUMINIZED.jpg

From my experience they dont care, infact when i did mine he just made up a section after the rear flange in 2.5" to make it legal and tld me he would put my old one in the boot so i can put it back on after i have cleared the defect.

That joiner is pretty much no different to a flanged connector.

well if that's so it should make swapping the exhuast for epa a lil easier , you mean when you cleared the EPA?

plan on making up a 3 to 2" adapter to aresstor to muffler when i get round to it, then just remove a mount and clamp the pipe on for epa duties

i've passed a rwc with a 3", i'm just talking about the anal epa here

Yea im with Dolan, want to sell my car, surley there are the few places that are more lenient than others? I dont even know what the rules are here

Are pod filters illegal? also factory return front mounts and HID's?

The last owner got the RWC piss easy but that was before the big law change this year. At $200 a pop its not somthing I wana keep trying until it passes it could become quite expensive :wacko:

At $200 a pop its not somthing I wana keep trying until it passes it could become quite expensive :wacko:

So make the car legal before going for a RWC?

The rules are pretty clear and easy to follow - this thread covers it all.

So if you go in with a car that's above board, there is no reason to then have issues. Given what you have listed is not legal, if you do have issues then that's kinda your own issue if you chose to roll the dice. I know it sounds harsh, but that's just how it is.

thats sweet, I was thinking HID's were illegal, easy change over. But some how ive been thinking that pods were illegal as were fmic, I think some mechanics have mentioned that in the past, somthing about only allowed one intake modification. It sounds pretty stupid to me. I will do my best to make sure its all ligit when the time comes.

I think some mechanics have mentioned that in the past, somthing about only allowed one intake modification. It sounds pretty stupid to me.

Stupid or not - that's the law.

You could work that out by reading the first 3 posts of this thread :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...